Used Agitators, Blenders, Mixers

(3) Clamp on Lightnin agitator drives

• Manufacturer: Lightnin

(3) Clamp on Lightnin agitator drives Used lot of (3) Clamp on Lightnin agitator drives.

2 HP Chemineer Agitator System, S/S

• Manufacturer: Chemineer

2 HP Chemineer Agitator System, S/S Used 2 hp Chemineer agitator system, stainless steel shaft, blade and top, mounted on carbon steel frame with pneumatically opertated lift mechanism, 230/460 volt motor, floor ...

2 Cu Ft Ribbon Blender, S/S

2 Cu Ft Ribbon Blender, S/S Used 2 cu ft stainless steel ribbon blender, approximately 12" x 24" trough, ribbon driven by 1.5 hp motor, with 3 hp chopper, portable, 208-220/440 volt.

300 Gal Mazzoni Vertical Blender, S/S

• Manufacturer: Mazzoni

300 Gal Mazzoni Vertical Blender, S/S Used 300 gallon Mazzoni vertical auger blender, model C-2SD-212.1, stainless steel construction, 30" diameter x 30" straight side, cone top and bottom, center mounted 9" diam...

Drum Hoop Mixer

Drum Hoop Mixer Used Drum hoop mixer, meant for 20" L x 12" diameter drum, 0-26 RPM operating speed, with 0.5 hp motor, serial# 09-189, built 2010

100 Cu ft Carbon Steel Ribbon Blender

• Manufacturer: Dynamic safe

100 Cu ft Carbon Steel Ribbon Blender Used 100 Cu ft Carbon Steel Ribbon Blender, with motor drive.

1985 RIETZ BEPEX Ribbon Blender Surge Tank C-46-K3210

• Manufacturer: Bepex

Rietz Ribbon Blender Tub size 120" L X 50" W X 48" Deep. Stainless steel construction with steam jacket rated for 60 psi. @ 200 degrees. Single ribbon agitation with 3" end sanitary discharge. Half open top with ...

1985 RIETZ BEPEX Ribbon Blender Surge Tank C-46-K3210

• Manufacturer: Bepex

Rietz Ribbon Blender Tub size 120" L X 50" W X 48" Deep. Stainless steel construction with steam jacket rated for 60 psi. @ 200 degrees. Single ribbon agitation with 3" end sanitary discharge. Half open top with ...

Tri Clover Tri Blender, Model F3218, S/S

• Manufacturer: Tri-Clover
• Model: F3218

Tri Clover Tri Blender, Model F3218, S/S Used Tri Clover Tri Blender, model F3218MD-B40, stainless steel construction, approximately 8" diameter impeller, 1.5" liquid inlet, 3" powder inlet, 2" slurry outlet, in ...

0.75 HP Anchor Agitator Drive

0.75 HP Anchor Agitator Drive Used 0.75 hp Anchor agitator drive, 230/460 volt motor drive, mounted on stainless steel bridge, designed for approximately 14.5" diameter x 11.5" deep tank, stainless steel shaft an...

Sprout-Bauer Stainless Double Agitation Mixer Feeder Conditioner 21"W X 6'L

• Manufacturer: Sprout Bauer Inc.

Model DA21-6 For continuous, high intensity mixing, agglomerating, and conditioning. Adjustable speed, retention time, and mixing intensity. Mixing chamber is constructed with 3/16" stainless plate with a bottom-...

Stainless Steel V-Cone V-Shape Mixer Blender w/ Intensifier - 30 Cu/Ft

Stainless steel vessel with a diameter of 36". Required minimum clearance for swing radius: 107" from base elevation. Twin top hatches, 18" diameter. Discharges through a 10" pneumatic butterfly valve. Max. Worki...

Philadelphia Agitator Drive, Model PTE-08

• Manufacturer: Philadelphia

Philadelphia Agitator Drive, Model PTE-08 Used Philadelphia Agitator Drive, Model PTE-08, direct drive design with mechanical seal, less motor.

75 Cu Ft Young Ribbon Blender, S/S

• Manufacturer: Young Industries

75 Cu Ft Young Ribbon Blender, S/S Used 75 cu ft Young ribbon blender, stainless steel construction, approximately 42" wide x 96" long x 46" deep trough, 8" center bottom opening, serial# HB-3347, built in 1984.

3 Cu.Ft. Bectochem V Blender, S/S

• Manufacturer: Bectochem

3 Cu.Ft. Bectochem V Blender, S/S Used 3 Cu.Ft. Bectochem twin shell blender, model GMP, type Y Blender, stainlesss steel construction, on stand, cantilever design, with solid covers, manual butterfly value disch...