Used Wine Processing

Resina S-40 Capper

• Manufacturer: Resina

Used Resina, single spindle, model S-40 capper. This is a fully automatic capper. It is equipped with a single, back container gripper and operation is from right to left. This machine is equipped with the lift p...

Resina U-40 S/S Inline Capper

• Manufacturer: Resina

Used Resina model U-40 Inline capper. The machine is a fully automatic capper utilizing four pairs of tightening quills, with clutches on the last three pairs. It was manufactured in 1988 and has the stainless st...

Consolidated TG-14-31 Capper

• Manufacturer: Consolidated

Used Consolidated, rotary capper, model TG-14-31. The machine was manufactured in 1987. The machine has 14 capping heads and is equipped with 'Torque-Open' chucks. It is rated at a Normal Operating Rate of approx...

Cap/Bottle Hopper/Elevator

Used cap/bottle hopper-elevator. The machine is all stainless steel construction. The hopper is approximately 7 feet long by 6 feet wide at the top. The bottom tapers to the width of the elevator belt which is ap...

Pneumatic Scale 16 Head Capper

Used 16 head, Pneumatic Scale, plastic over-capper. This is not a screw capper, but a press-on overcapper. Included with the machine is the cap feed system and the Hoppman model FT150-1L-CRS sorter. This is a sta...

NEW ENGLAND MACHINE CAP HOPPER/ELEV.ATOR/SORTERATOR

Item is a used New England Machine, S/S cap hopper/elevator-sorter. The elevator is 20" wide and approximately 8' tall. This is a vertical (waterfall style) cap sorter. It was utilized with NEM dual head capper (...

New England Machine Dual Head Capper

Item is a used, New England Machine Dual Head Capper. It was utilized to run large diameter caps, (83MM and larger) on square/rectangular containers of pretzels (no container handling parts are included). A short...

Accumulation Disk 36 inch

NEW 36 inch unscramble/accumulation disk. The disk is of heavy duty construction utilizing a stainless steel disk with a 3/16 inch SS support disk. The frame is also stainless steel and constructed of 1 1/2 inch ...

2013 NJM Packaging BTORQCA-AO1 Cap Hopper/Elevator/Sorter

• Manufacturer: NJM

Item is a used NJM Packaging Cap Hopper/Elevator/Sorter. Machine is S/S construction with the hopper being approximately 42" x 42" at the top. The flights are 10" wide and spaced at approximately 3" intervals. Th...

New Stock Letina 396Gal/1500L Forkliftable Variable Capacity Jacketed Tank

• Manufacturer: Letina Inox

New Stock Letina 396Gal/ 1500L VC jacketed floating lid tank with the following specifications: — volume approx. 1500 lit — coat diameter 1116 mm, height 1500 mm — total height approx. 2100 mm — closed stand ...

MRM/ELGIN Husky 12 head

• Manufacturer: Elgin

Item is a used MRM/Elgin model Husky 1, 12 head rotary pressure/gravity filler. The machine is all stainless steel construction. Rotation is counterclockwise (right to left) with feed-screw infeed.. Valves are 5/...

ENERCON CAP SEALER

• Manufacturer: Enercon

Item is a used, Enercon, heat induction cap sealer. This is a water cooled machine and has a seal bar capable of sealing up to a 38mm cap. Power requirement is single phase, 120 volt. This is a 1 KW machine drawi...

Fluid Diverter Panel

• Manufacturer: Ager Tank and Equipment Co.

condition: Excellent Item is a used, all S/S Diverter Panel with all 2 inch ports. Panel dimensions are 3 feet X 3 feet. The panel has seven, 2 inch ports and all of the ports (front and back) are 2 inch Tri-Clam...

Accumulation Disk 48 Inch

NEW 47 1/2 inch unscramble/accumulation disk. The disk is of heavy duty construction utilizing a stainless steel disk with a 3/16 inch SS support disk. The frame is also stainless steel and constructed of 1 1/2 i...

Filter, Rotary, Vac, 10' x 20', S/st, Precoat, Ametek, #S741653

• Manufacturer: AMETEK Powervar

Ametek 10' diameter X 20' face rotary vacuum pre-coat filter, approximately 600 square feet surface area, stainless steel construction. Unit has (2) 100 HP Nash vacuum pumps, stainless steel drum with drum drive,...