1993 Mubea KBLH 1000
- Manufacturer: Mubea
- Model: KBLH 1000
Max. punching force: 1000 kN Throat: 510 mm Large support table with material stops on the punching side Electrical contact length stop for the shearing side Hydraulic hold-down device for profile and flat st...
Mubea MIW 400
- Manufacturer: Mubea
- Model: MIW 400
Punching force: 400 kN (punches e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shears With pipe notcher on the bar shear Foot switch for stroke activation Support table on the punching side Qui...
Mubea KBLH 1000
- Manufacturer: Mubea
- Model: KBLH 1000
Max. punching force: 1000 kN Projection: 510 mm Positioning unit from PEHU from 2019 for the punching side (max. X-axis approx. 1100 mm, Y-axis approx. 350 mm) Hydraulic hold-down device for profile and flat s...
Mubea MIW 400
- Manufacturer: Mubea
- Model: MIW 400
Punching force: 400 kN (punches e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shears Foot switch for stroke activation Quick change device Assortment of tools is included in the price
Mubea KBLH 700
- Manufacturer: Mubea
- Model: KBLH 700
Max. punching force: 700 kN Projection: 510 mm Cuts on the flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat iron Quick change device Range of tools is included in the price Weight: 3,00...
1991 Peddinghaus Peddimaster 110/170
- Manufacturer: Peddinghaus
- Model: PEDDIMASTER 110170
Maximum punching force: 1100 kN Maximum shearing force: 1700 kN Punching depth: 510 mm Holes 31 in 25 mm Flat steel: 500 x 22 mm Hydraulic hold-down device for the flat steel knife Square notcher Weight: a...
Mubea MIW 800
- Manufacturer: Mubea
- Model: MIW 800
Punching force: 800 kN (punches e.g. 30 m in 20 mm steel) Cuts 350 x 16 mm on the flat steel shear Foot switch for stroke activation Support table on the punching side A range of tools is included in the price
1996 EHT TSS 4-60 guillotine shears
- Manufacturer: EHT
- Maximum thickness: 4 millimeter
Used EHT guillotine shear with automatic stacking and transport table, light barrier, and cut counter. Includes scrap diverter, compressed air required, and a 6-meter hopper. The machine will be professionally ...
Hohenbrunn, Germany
2000 Fasti 502-10-2
- Manufacturer: Fasti
- Model: 502-10-2
Max. sheet thickness: 2 mm steel Max. disc diameter: 1000 mm Motorized drive via foot switch
$3,018 USDGütersloh, Germany1969 Wila HS 205-3 guillotine shears
- Manufacturer: Wila
- Maximum thickness: 3 millimeter
Used Wila hydraulic guillotine shear, cutting length adjustment, foot pedal, without stop. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will...
Hohenbrunn, Germany2008 RAS POWERcut2 guillotine shears 86.33
- Manufacturer: RAS
- Maximum thickness: 6.3 millimeter
- Power requirement: 18.5 kilowatt
Used hydraulic RAS motor-driven guillotine shear, stroke rate 30-50 per minute, with 1500 mm angle stop Note: The machine is currently being refurbished; the images were taken before the refurbishment.
Hohenbrunn, Germany
PEDDINHAUS Caddy 63 #1077-03398
- Manufacturer: PEDDINHAUS
The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale; our terms and conditions of business and sale apply exclusively. About us m...
Dorsten, Germany
2002 HACO TS 3006 #1077-HDM0092
- Manufacturer: Haco - Atlantic
- Model: TS 3006
- Maximum thickness: 6 millimeter
- Power requirement: 7.5 kilowatt
The backgauge is electric. The technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to sell the machine prior to purchase; our terms and conditions of sale...
Dorsten, Germany
1976 PEDDINGHAUS 229/20 #1077-03251
- Manufacturer: Peddinghaus
- Model: 22920
- Power requirement: 15 kilowatt
Overhaul 2001 Additional equipment: o scrap conveyor o Adjustable length stop, including pneumatic lifting cylinder o Storage with cross conveyor in front of the machine o Outlet behind the machine o Central lubr...
Dorsten, Germanycombined hydraulic section steel shear Peddinghaus Peddiworker 500 .de
- Manufacturer: Peddinghaus
- Model: Peddiworker 500
Peddinghaus Peddiworker 500 – Hydraulic Section Shear Multifunctional machine · 50 t pressing force · Built approx. 1988 Technical specifications Pressing force (max.): 50 t Flat steel: 150 × 15 mm or 180 × 18 mm...
Ermak HGD Shearing Equipment
- Manufacturer: Ermak
- Model: HGD
Good condition Ermak HGD Shearing Equipment manufactured in 2020. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
