Used Semiconductors in Lombardy, Italy

LDM Series - Rack Modules up to 8kW

The LDM product family has been engineered to maximize the power-to-volume ratio of the laser source. Therefore, it is possible to achieve up to 8kW of maximum power in 7 units of 19" format, thus being able to b...

LDMBlue Series - Blue diode lasers up to 2kW

The LDMBlue series is designed to optimize all processes related to highly reflective metallic materials including copper and gold. The ability to generate a laser beam of 1.5kW maximum power in the 450nm wavelen...

Pulsed Fiber Lasers 20 - 100 W

The Q-Switch series of pulsed fiber lasers with powers ranging from 20 to 100 W represents the laser solution for industrial marking and micromachining developed by Raycus. This type of pulsed laser has a high pe...

aeroPULSE-PS - up to 40 W, 5 ps

• Manufacturer: Aeropulse

aeroPULSE-PS is NKT Photonics' innovative high-power picosecond laser, developed primarily for industrial applications such as precision cutting and marking, micro-drilling, and general micro-machining. Its "full...

aeroPULSE-FS - up to 60 W, 500 fs

• Manufacturer: Aeropulse

aeroPULSE-FS is NKT Photonics' innovative high-power femtosecond laser, developed primarily for industrial applications such as precision cutting and marking, micro-drilling, and general micro-machining. Its "ful...

Carbide - up to 80W, 290fs

Carbide is an ultra-short pulse, femtosecond and picosecond laser system, based on DPSS (diode-pumped solid-state, Yb active medium) technology, integrated in a single unit that combines pulse energies of the ord...

BE-2.5x, BE-3x, BE-4x and BE-6x

The beam expanders offered by Iradion are small, lightweight and easy to install, enlarging the beam diameter and collimating it optimally. The beam expander is ideal for reducing hot-spots that risk causing opti...

Infinity Series 50-120W

Iradion CO2 lasers are made with ceramic cavities, alumina. This nonmetallic material is extremely hard and retains its mechanical properties even at very high temperatures. It is an electrical insulator, but wit...

1600 Series 200-250W

Iradion CO2 lasers are made with ceramic cavities, alumina. This nonmetallic material is extremely hard and retains its mechanical properties even at very high temperatures. It is an electrical insulator, but wit...

LDF Series - Modules with high brilliance beam converter

Each laser source must adapt to the specific application in order to meet it in terms of cycle time and processing quality. This is why the LDF series with beam converter was created, designed for applications wh...

LDFPulse Series - Pulsed Diode Lasers

LDFPulse is ideal for rapid surface finishing. With a beam quality of 4mm*mrad, pulse energies of up to 10mJ can be achieved. Pulse energy and repetition rate can be adapted to specific process requirements. The ...

LDF Series - up to 45kW

Laserline lasers based on the LDF platform are the new benchmark for high-performance diode lasers. This wheeled product line is designed to maximize ease of installation and local and remote service in order to ...