Used Press Brakes in Saxony, Germany

GWF press brake 300t

Press brake GWF H300-3 detailed photos of the tools available on request ! used, tested !

RIETSCHOTEN Pneumatic brake caliper

Pneumatic brake caliper, brake, brake caliper RIETSCHOTEN ELEPHANT BRAKES Type R&H 100.102.01 10390 New !

1993 GWF D 160 - 25

• Manufacturer: GWF

ex Warehouse pressure 160 t chamfer lenght 3050 mm distance between columns 2550 mm table width 220 mm column arm 280 mm dayligth 440 mm work stroke max. 250 mm total power requirement 22 kW weight of the machine...

1987 MENGELE H1250-10

• Manufacturer: Mengele

ex location, free loaded, excl. dismantling pressure 1250 t chamfer lenght 15000 mm distance between columns 10160 mm control CNC 10 Grafik throat 770 mm table length 15000 mm weight of the machine ca. 170 t dime...

1990 ALIKO 12800 x 3000 to

• Manufacturer: ALIKO
• Throat depth: 700 millimeter

ex site, plus dismantling pressure 3000 t chamfer lenght 14000 mm distance between columns 10500 mm Control CYBELECCNC 7000 m. Grafik table width 1000 mm stroke 1300 mm min./max.distance between table and ram 180...

1978 HÄMMERLE 2S-100-2050

• Manufacturer: HÄMMERLE
• Stroke length: 150 millimeter

ex Warehouse pressure 100 t chamfer lenght 2050 mm total power requirement 11 kW weight of the machine ca. 5,9 t dimensions of the machine ca. m

1962 Mengele A 80-25 L

• Manufacturer: Mengele
• Stroke length: 160 millimeter
• Throat depth: 250 millimeter

Table length approx. 3450 mm Mengele A 80-25L oil hydraulic press brake press brake 80 to used. maximum distance between table and upper beam: 540 mm clear width between the uprights: 2550 mm tool length approx. ...

1966 Mengele C320-4B

• Manufacturer: Mengele
• Model: C320-4B

last revision and repair 2000 press brake press brake press brake used location D-01587 Riesa max. sheet thickness at 6.000 mm bending length: approx. 7,5 mm. The machine is designed for very deep shaft bending, ...

Cincinnati 5x8 AC (5 Series AC x 2500 MM)

• Manufacturer: Cincinnati

Mechanical press brake sheet bending machine 110 Mp used inclination adjustability: 25 mm 380 V; 50 Hz; 7,728 kW Documentation / programming & operating instructions available. Tools for the machine available (se...

1996 Daewoo Duck Sung M/C 600Sx12000L

• Manufacturer: Daewoo
• Throat depth: 645 millimeter

Hydr. Pressbrake 6000-300 - jib arm length= 720mm - incl. back gauge (without crowning system) adjustment travel horizontal/vertical: 680/200mm motoric Optionally, two of these press brakes can be offered - also ...

1989 HÄMMERLE AP 100x2600

• Manufacturer: HÄMMERLE
• Stroke length: 265 millimeter
• Throat depth: 300 millimeter

3-point BENDING - mould bending -Hydrocushion (for regular force adjustment over the entire working length) -Backstop: width 2200mm, 2x supports travel 1800mm and 4x stop travel W:2550xL:860mm -Control panel on t...

2008 OMAG POE 31541

• Manufacturer: Omag
• Stroke length: 250 millimeter
• Throat depth: 500 millimeter

Machine stands approx. 0.95 m inside foundation in the floor. Application for: Embossing and free bending via the DNC control, manual, semi-automatic and automatic operation is possible. distance between table an...

1984 WEINBRENNER GP 50

• Manufacturer: Weinbrenner
• Model: GP 50
• Stroke length: 170 millimeter
• Throat depth: 250 millimeter

- back gauge motorized adjustable - crowning - biggest distance between table and bottom edge of the ram = 600mm - smallest distance between the table and the lower edge of the ram = 430mm The machine has a contr...

1990 BEYELER RH100-3100

• Manufacturer: Beyeler
• Stroke length: 215 millimeter
• Throat depth: 255 millimeter

500 mm backgauge, width 2570 mm; 2 support frames can be moved manually across the entire width Operation via control panel and/or control stand for two-hand/foot operation Control also via manual control unit in...

1987 Promecam STPC 200-40

• Manufacturer: Promecam
• Throat depth: 320 millimeter
• Power requirement: 15 kilowatt

incl. 2 pieces table extensions rear support 700mm travel motorized and 2 pieces support blocks with travel 1500mm motorized right/left operation via control panel swiveling and 2x foot operation Hydraulics: max....