Used Material Handling in West Virginia, USA

Hapman Stainless Steel Forklift Bulk Bag Supersack Unloader 2-Ton

• Manufacturer: Hapman

Stainless steel square tubular support frame, two stacking sections. Bulk bag agitator base installed with opposing pneumatic bag massagers & controls. Bulk bag discharges using the manually controlled 18"Ø iris ...

Tubar Portable Hydraulic Drum Dumper

500 lb capacity. 208-230/460 volt. Complete with hydraulic pump, 1.5 HP motor, resevoir, controls, and limit switches. Carbon steel construction with aluminum material contact parts. 10" bush & wilton gate v...

30 Gal Floataire Stainless Steel Rotary Drum Handler Tumbler Mixer

• Manufacturer: Floataire LTD

Stainless steel rotating drum on a fixed angle with clamp-on cover (non-gasketed) Drum Dimensions: Ø19" X 23.5" For dry solids, powers and pellets with a flooded capacity of 3.9 cu/ft Stationary safety cage (45" ...

ACRISON BIN DISCHARGER BD2.5

• Manufacturer: Acrison

S/N 01458-01. ALL CARBON STEEL CONSTRUCTION. INLET FLANGE HAS A 29.5"I.D., (20) 3/4"Ø THREADED HOLES ON 33.5"Ø B.C. DISCHARGE SLEEVE IS 12"Ø X 4"L. (2) SIDE ACCESS DOORS, UNIT IS POWERED BY COUNTER-ROTATING TA...

Acrison Bin Discharger BD-4 Steel 48X48 inlet

• Manufacturer: Acrison

SER# 93574-03. TANDEM 3 HP, 230/460V, 1735 RPM, 8.8/4.4 AMPS, 3 PH, 60HZ, GENERAL ELECTRIC MOTORS. STAINLESS STEEL BIN AND AGITATORS. FLANGED 24" SQ. DISCHARGE. AGITATOR RPM IS 3.67. Demonstration video on ...

100 Cubic Foot Mixer Bin Conditioning Surge Hopper

54" dia x 66" straight side. 40" long 60° cone; 10" diameter discharge. 15 HP sm cyclo drive, model uc19165, S/N 227070, 354:1 ratio, service factor is 1.0, input HP is 14.4 at 1750 rpm. Output torque is 15...

300 FT3 Insulated Hopper w/ 6' dia Vibra Screw Bin Activator Live Bottom

BIN MATERIAL CONSTRUCTION IS 6063 ALUMINUM. DIAMETER IS 8.5', STRAIGHT SIDE 43". CONE DIMENSIONS 36" HIGH AT 60 DEGREE ANGLE. UNIT IS EQUIPPED WITH A 6' VIBRA SCREW BIN ACTIVATOR, S/N-BA752032 WITH GYRATOR HOU...

882 Cubic Foot Aluminum Silo, 8' Dia. X 39' High

• Manufacturer: Schuld Mfg. Co.

1/4" thick all welded 5052 aluminum alloy construction, multi-ported top fill with sloped cover & handrail ring, skirted base, eccentric cone discharge with 6"ø ansi 150 flange connection with 15'-3" clearance to...

40 CUBIC FOOT Stainless Steel BLENDING / DRYING BIN

• Manufacturer: Ward Tank Corporation

BUILT BY WARD TANK CORPORATION, CHARLOTTE, NORTH CAROLINA. STAINLESS STEEL CONSTRUCTION. 53-1/2" DIAMETER WITH 82" STRAIGHT SIDE. COVER IS 1/2" THICK STAINLESS STEEL FLANGED/BOLTED. COVER HAS ONE, 4" FLANG...