Used Lathes in Saxony, Germany

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW, ROTO RECORD DH-A-250 x 3 ( DH-A-250x3 ) TGL 30-2332 used, tested !

RÖHM power chuck

• Manufacturer: Röhm

Power chucks, 3-jaw chucks, three-jaw chucks, wedge hook chucks RÖHM KFD-200/3HS 143888 Height without 3x screw M12 x 1.75 Jaws individually adjustable by toothing ! with accessories ! New !

AVIA dividing head

• Manufacturer: Avia

Dividing attachment with center point and lathe chuck, dividing head, dividing table AVIA Type FNCb Center height 110 mm -90° - +90° rotatable -10° - +10° tiltable lathe chuck with second set of jaws used, tested !

MICROCENTRIC precision air chuck

Precision air chuck, 3-jaw chuck, three-jaw chuck, lathe chuck MICROCENTRIC 6-120-3 Bore Ø: 6.5 mm with countersunk hole: Ø 11 mm, depth: 22 mm used, tested !

SCHUNK top jaws

• Manufacturer: Schunk

soft top jaws, 4 sets soft top jaws beveled, 4 sets SCHUNK SWBL 160 0120151 soft top jaws, beveled, 4 sets SWB 160 0120101 Soft top jaws, 4 sets for matching lathe chuck see MMZ951 ! New !

RÖHM power chucks, pneumatically operated

• Manufacturer: Röhm

Power chucks, 3-jaw chucks, three-jaw chucks, wedge hook chucks pneumatically operated RÖHM DURO-NC 160 Through-hole: Ø 39 mm, depth: 15 mm pneumatic clamping device: Ø 275 mm, height: 115 mm spare part e.g. for ...

SMW® AUTOBLOK repair kit for shaft chucks

• Manufacturer: SMW® AUTOBLOK

Repair kit for shaft chucks SMW® AUTOBLOK W215-3-C Spring assembly W-215 201214 1x Locking screw set AM022x1.5 - W-215 068639 New !

PRATT BURNERD 6-bake chuck

6-jaw chuck, six-jaw chuck PRATT BURNERD 3260 03205 3x stud bolts: M16 x 2.0, length: 38 mm used, tested ! Dimensions: 310 x 310 x 225 mm

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS / WMW 4x threaded hole: M12 x 1.75, depth: 25 mm 1x hole: Ø 19 mm, depth: 8 mm cone: Ø 103 / 106 mm, depth: 15 mm used, tested !

PAGUS face plate

• Manufacturer: Pagus

Face plate, clamping plate PAGUS 4x threaded hole: M16 x 2.0, depth: 30 mm used, tested !

STANKO face plate

• Manufacturer: Stanko

Faceplate STANKO 7103-0049 4x threaded hole: M12 x 1.75, depth: 40 mm 1x hole: Ø 19 mm, depth: 8 mm Cone: Ø 103 / 106 mm, depth: 15 mm New !

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS bore Ø: 61 / 70 mm, with thread, pitch: 6.0 mm used, tested !

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS Outside ø: 305 mm | Hole circle ø: 280 mm | Bolt circle flange ø: 135 mm | Bore ø: 35 mm | Thickness: 50 mm | Groove: 14 / 24 mm | Dimensions: 305 x 305 x 50 mm

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS Short cone External ø: 400 mm | Flange: 155 mm | Hole circle: 134 mm | Bore ø: 110 mm | Height with jaws: 140 mm | Total height: 190 mm | Dimensions: 400 x 200 mm

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS with reversible jaws ! used, tested !