Used Lathes in Bern, Switzerland

TORNOS M 4

• Manufacturer: Tornos
• Spindle bore: 6 millimeter

Diameter of work admitted: 4 mm | With flat cames: 28 mm | Spindle hole: 6 mm | Max. treading diameter: 4 M | Number of tool cutters: 5 | Number of spindle speeds: 14 | From: 2000 t/min | Up to: 12000 t/min | Vo...

TORNOS R 10

• Manufacturer: Tornos
• Model: R10
• Spindle bore: 13 millimeter

Diameter of work admitted: 10 mm | With flat cames: 70 mm | With bell cames: 100 mm | Spindle hole: 13 mm | Max. treading diameter: 8 M | Number of tool cutters: 5 | Number of spindle speeds: 20 | From: 1050 t/m...

TORNOS M 4

• Manufacturer: Tornos
• Spindle bore: 6 millimeter

Diameter of work admitted: 4 mm | With flat cames: 28 mm | Spindle hole: 6 mm | Max. treading diameter: 4 M | Number of tool cutters: 5 | Number of spindle speeds: 14 | From: 2000 t/min | Up to: 12000 t/min | Vo...

TORNOS R 10

• Manufacturer: Tornos
• Model: R10
• Spindle bore: 13 millimeter

Diameter of work admitted: 10 mm | With flat cames: 70 mm | With bell cames: 100 mm | Spindle hole: 13 mm | Max. treading diameter: 8 M | Number of tool cutters: 5 | Number of spindle speeds: 20 | From: 1050 t/m...

TORNOS M 4

• Manufacturer: Tornos
• Spindle bore: 6 millimeter

Diameter of work admitted: 4 mm | With flat cames: 28 mm | Spindle hole: 6 mm | Max. treading diameter: 4 M | Number of tool cutters: 5 | Number of spindle speeds: 14 | From: 2000 t/min | Up to: 12000 t/min | Vo...

TORNOS R 10

• Manufacturer: Tornos
• Model: R10
• Spindle bore: 13 millimeter

Diameter of work admitted: 10 mm | With flat cames: 70 mm | With bell cames: 100 mm | Spindle hole: 13 mm | Max. treading diameter: 8 M | Number of tool cutters: 5 | Number of spindle speeds: 20 | From: 1050 t/m...

ESCO D 4

• Manufacturer: Esco
• Spindle bore: 4 millimeter

Diameter of work admitted: 4 mm | With flat cames: 24 mm | With feed device 11.2: 58 mm | Spindle hole: 4 mm | Number of tool cutters: 2 | Number of spindle speeds: 2 | From: 4000 t/min | Up to: 6000 t/min | Vol...

SPINDLE SFJ UJ-50×250

Spindle SFJ type UJ-60×250

MILLING AND TURNING CENTER “MECTRON” TYPE MCH-81

• Manufacturer: MECTRON

5 axes simultaneously, Fanuc 31i-B-5, spindle BT-30

3-JAWS CHUCK PRATT BURNERD

Ø 160 mm for Studer S30

3-JAWS CHUCK PRATT BURNERD

Ø 160 mm for Studer S30

BENCH “SCHAUBLIN” TYPE KANYA NON MOTORISED

• Manufacturer: Schaublin

180x80x92 cm – cabinet LISTA with 6 drawers

CHUCK ADAPTER PLATE Ø130 mm for spindle type W-25″”

W-25, livré avec bague de sécurité

2006 LNS ECAS 32 T

• Manufacturer: LNS

Number of axis total: 4 | Number of spindles: 2 | Turning length: 350 mm | Max. bar diameter: 32 mm | Up to: 7000 t/min | C axis (spindle,resolution): ° | Number of tools: 10 | Number of driven tools: 2 | Spindl...