Used Laboratory Fume Hoods in Guangdong, China

Clean Room Fume Hood

Leytemedica LTLG04 laboratory fume hood

• Manufacturer: Leyte

No matter what delivery way ,depending on your actual requirements... Q:What’s the minimum order quantity (MOQ)?A:For most of our medical products, even order for only one unit is warmly welcomed. Q: Can yo...

Explosion Proof Laboratory Fume Hood

1.Casework: 1.2mm thickness of cold-rolled steel plate, after acid washing, phosphide andelectrophoresis, sprayed with good quality anti-corrosion static coating. 2.Inside Lining: 4mm thickness of Compact. 3.Work...

University Laboratory Bench Top Fume Hood

1.Casework: 1.2mm thickness of cold-rolled steel plate, after acid washing, phosphide andelectrophoresis, sprayed with good quality anti-corrosion static coating. 2.Inside Lining: 4mm thickness of Compact. 3.Sash...

Ductless Fume Hood

SPECIFICATION *1. Hood body&base cabinet: Use galvanized steel sheets ≥1.2mm, electrostatically sprayed with epoxy resin, and covered with durable anti-chemical lead-free coating to maintain high finish and minim...

Walk-In Fume hood

SPECIFICATION 1.Hood body: 1.0mm full-thickness high-quality cold-roll steel sheet is used as a whole; the steel surface is treated, phosphating and other processes, and then electrostatic powder sprayed with epo...

PP Fume Hood

PP is polypropylene. English name: Polypropylene, referred to as: PP, commonly known as: pp Polypropylene is the representative of polyalpha-olefins, a thermoplastic resin made from propylene polymerization, whos...

Benchtop Fume Hood

SPECIFICATION 1.Hood body: 1.0mm full-thickness high-quality cold-roll steel sheet is used as a whole; the steel surface is treated, phosphating and other processes, and then electrostatic powder sprayed with epo...

Perchloric Acid Fume Hood

The perchloric acid fume hood is specially designed to handle the regular use of hot perchloric acid, hot nitric acid or perchloric acid. Does not handle sulfuric acid, acetic acid, organic solvents, or any combu...

Multi-sided Fume Hood

SPECIFICATION 1.Hood body: 1.0mm full-thickness high-quality cold-roll steel sheet is used as a whole; the steel surface is treated, phosphating and other processes, and then electrostatic powder sprayed with epo...

Basic Series Fume hood

SPECIFICATION 1.Hood body&base cabinet: 1.0mm full-thickness high-quality cold-roll steel sheet is used as a whole; the steel surface is treated, phosphating and other processes, and then electrostatic powder spr...

Walk-In Lab Fume Hood

1.Casework: 1.2mm thickness of cold-rolled steel plate, after acid washing, phosphide andelectrophoresis, sprayed with good quality anti-corrosion static coating. 2.Inside Lining: 4mm thickness of Compact. 3.Work...

Benchtop Ductless Fume Hood

SPECIFICATION *1. Hood body&base cabinet: Use galvanized steel sheets ≥1.2mm, electrostatically sprayed with epoxy resin, and covered with durable anti-chemical lead-free coating to maintain high finish and minim...

Chemical Resistant All Steel Fume Hood

1.Casework: 1.2mm thickness of cold-rolled steel plate, after acid washing, phosphide andelectrophoresis, sprayed with good quality anti-corrosion static coating. 2.Inside Lining: 4mm thickness of Compact. 3.Work...

Lab Equipment Stainless Steel Fume Hood

1.Casework: 1.2mm thickness of #304 stainless steel plate, after acid washing, phosphide andelectrophoresis, sprayed with good quality anti-corrosion static coating. 2.Inside Lining: 4mm thickness of Compact. 3.W...