Used in Hiroshima, Japan

Dalton DV-1-100
- used
- Manufacturer: Dalton
Total capacity: 220L with butterfly valve Power: 0.75KW | Purchasing area: 60Hz | Material: Gluing section SUS | Quantity saved: 1 unit
Hiroshima, Japan
Ribbon Blender
- used
Main motor 11Kw, discharge motor 0.75Kw (reduction ratio 1/29) Capacity approx. 1500L
Hiroshima, Japan
[TANABE WILTECH] Basket type centrifuge 55inch
- used
- Manufacturer: Tanabe Wiltech
Manual scraping device. Bottom discharge type. Main motor pole change specification, 13Kw-26Kw 200V, explosion proof
Hiroshima, Japan
2000 Kohken Powtech FS-J01-S
- used
- Manufacturer: Kohken Powtech Co.
Capacity: 20Kg/h max. ⇓Test run video⇓. Power: 0.4Kw200V | Quantity saved: 1
Hiroshima, Japan
2007 Buhler SDV 1100
- used
- Manufacturer: Bühler
Chilled roll Effective dimensions of roll: φ400×1100 Motor: 45kw Weight: 4.2 tons With board We were able to check the operation of each part individually, but the operation check using the board shows only roll ...
Hiroshima, Japan
2001 [Kurita Machinery Corporation] Filter press
- used
- Manufacturer: Kurita Machine Manufacturing Co.
Closed delivery / Hydraulic tightening type. New hydraulic unit required. 500 square x 12 chambers (filtration area approx. 7-8 m2 or so).
Hiroshima, Japan
2007 ADVANTEC STH426FA
- used
- Manufacturer: ADVANTEC
Capacity: 98L, Max. pressure: 0.19MPa Sterilization temperature control range: 105-128°C Sterilization timer: 1 to 250 minutes
Hiroshima, Japan
1991 Mitsubishi Kakoki SJ-30T
- used
- Manufacturer: 三菱化工機
1 set of new spare parts available Disassembly tool is available
Hiroshima, Japan
Tomoe Kogyo P-3400
- used
- Manufacturer: Tomoe kogyo
3650rpm / approx. 3000G. Gear ratio 1/165. Click here to see a video of the test run (YouTube) upon completion of the maintenance.
Hiroshima, Japan
1997 Lhasa Industry ATS 600 DS
- used
- Manufacturer: Lhasa Industry
Argyre shifter Material of powder contact part: SUS Motor: 0.4kw The oscillating mechanism is more efficient than the vibrating type. The sifting particles do not bounce on the mesh surface as they do in the vibr...
Hiroshima, Japan
Reaction can 5000L
- used
Material: Wetted parts SUS304. Drive unit is removed and placed separately.
Hiroshima, Japan
[New Stock] Made in Korea 800Ø IDTS800-1
- used
- Manufacturer: IDTS800-1
Available in two different configurations. [In stock] Cassette type Material of contacting parts: SUS304 Frame material: SS400 Frame diameter: 800 Motor: 0.75kW Tapping ball: φ30 Made of silicone This manufacture...
Hiroshima, Japan
Tanabe AT-48
- used
- Manufacturer: Tanabe
Wetted parts material: Cage part SUS316. Casing part: inner rubber lining / outer wall SS 48-inch fully automatic bottom discharge type. Capacity 225L Equipped with control panel and hydraulic unit. Low speed ope...
Hiroshima, Japan
2007 IHI IX-36T
- used
- Manufacturer: IHI
Rotation speed 3150 rpm (centrifugal effect 2000G) Gearbox GT-2X (1/88) With soundproofing box Gross weight of main body 2300kg
Hiroshima, Japan
2007 Sekko Sangyo SSR150
- used
- Manufacturer: Seikou Sangyo
18.6m3/min, 55kpa Power: 30kw | Purchasing area: 60Hz | Quantity saved: 3 units
Hiroshima, Japan