Used General Laboratory Equipment in Beijing, China

TPP0101 Voltage Probe
- Manufacturer: 美国泰克/Tektronix
Introduction: The TPP0101 probe is a 100MHz, 10X passive voltage probe with an input resistance of 10MΩ. For use with BNC oscilloscopes with 1MΩ/20pF (TPP0101) inputs. It is the highest bandwidth, lowest probe lo...
Beijing, China
CM 605 Hook Table
- Manufacturer: 法国/CA
Introduction: With 10AAC/DC weak current test, analog AAC/DC output can be used for data recording, auto range & ADC have auto range, with data hold & PEAK DC current test. Applicable to industrial inspection an...
Beijing, China
TCP300/400 Current Measurement System
- Manufacturer: 美国泰克/Tektronix
Introduction: The TCP300 and TCP400 Series AC/DC current measurement series are very advanced current measurement systems that meet today's current measurement needs. When connected to a Tektronix oscilloscope vi...
Beijing, China
ENY81 eight-wire coupling network
- Manufacturer: 德国罗德与施瓦茨/R&S
Introduction: Radio interference and immunity measurements on unshielded, symmetrical telecommunication ports Radio interference and immunity measurements on unshielded, symmetrical telecommunication ports ▪ Radi...
Beijing, China
ENY81-CA6 eight-wire coupling network
- Manufacturer: 德国罗德与施瓦茨/R&S
Introduction: Radio interference measurements on unshielded, symmetrical telecommunication ports ▪ Radio interference measurements in accordance with: - CISPR 32 and EN 55032 ▪ Immunity measurements according to ...
Beijing, China
ENV216 two-wire V-type network
- Manufacturer: 德国罗德与施瓦茨/R&S
简介： ENV216两线V型网络满足CISPR16-1-2，EN55016-1-2，VDE0876和ANSIC63.4标准，频率范围9kHZ～30MHz，模拟阻抗50MHz+50Ω||50Ω通过一个16A阴头具有保护地的连接器链接EUT，不同型号对应不同国家的连接器系统。产品简介： ENV216两线V型网络满足CISPR16-1-2，EN55016-1-2，VDE0876和ANSIC63.4标准，频率范围9kHZ～30...
Beijing, China
Passive Voltage Probe OI8100
- Manufacturer: 欧泰克/OItek
Introduction: OI8100 should be used on instruments with an input impedance of 1MΩ and a shunt capacitance of 20pF. When used with these instruments, its input capacitance is compensated in the range of 10pF to 50...
Beijing, China
OI-RFS Series RF Switching Enclosure
- Manufacturer: 欧泰克/OItek
Introduction: The OI-RFS series RF switching switch box adopts a high-reliability coaxial mechanical RF switch matrix to achieve automatic switching of up to 8 RF channels. Product Introduction: The OI-RFS series...
Beijing, China
HO3508 Logic Probe
- Manufacturer: 德国RS惠美/RSHameg
Introduction: HO3508 logic probe has 8 logic channels (LCH0~LCH7 or LCH8~LCH15), suitable for MSO. The oscilloscope can adjust a group of 8 logic channels. The logic channel is activated and the LED is displayed ...
Beijing, China
8009 Resistivity Test Fixture
- Manufacturer: 美国吉时利/Keithley
Introduction: The 8009 resistivity test fixture measures resistivity up to 1018 Ω-cm or square resistance of 1017Ω/□. It uses a three-ear triaxial connector to facilitate connection with Keithley's 6517B electrom...
Beijing, China
HZ-1 Wooden Tripod
- Manufacturer: 德国罗德与施瓦茨/R&S
Introduction: For HFH2-Z6, HK116, HL223, HUF-Z4. Lightweight metal universal ball joint, can be tilted within 25°, can be locked in any position, each tripod leg can be extended from 830mm to 1360mm long. For HFH...
Beijing, China
TPA-BNC Interface Adapter
- Manufacturer: 欧泰克/OItek
Introduction: The TekProbe-BNC to TekVPI probe interface adapter connects to a TekVPI oscilloscope. This adapter transmits analog measurement signals acquired by a connected TekProbe through the BNC interface on ...
Beijing, China
OI-AT14S semi-composite antenna mount
- Manufacturer: 欧泰克/OItek
Introduction: The OI-AT14S semi-composite antenna mount is a high-performance semi-composite bracket product developed by Ocean Instruments. It is mainly used to fix test antennas, and different antennas can be i...
Beijing, China
OI-AT16A All-composite antenna mount
- Manufacturer: 欧泰克/OItek
Introduction: The OI-AT16A all-composite antenna stand is designed for electromagnetic compatibility (EMC) test environment. It is used to support and position the antenna. Its frame is made of all-composite mate...
Beijing, China
P52xxA Series High Voltage Differential Probes
- Manufacturer: 美国泰克/Tektronix
Introduction: High-voltage differential probes are used to measure the voltage difference between two test points that are not grounded. Tektronix's high-voltage differential probes can be used for signals up to ...
Beijing, China