Used Foundry & Casting in Germany

1986 STEFFENS DUO-MIX 1

• Manufacturer: STEFFENS

Batch max. 80 l/120 kg, container Ø 600 mm, dual mixing principle: side and bottom mixing arms, capacity 2-3 t/h, drive power 4 kW, connected load 380 V, 50 Hz, pneumatic closure, safety limit switch, control wit...

1978 VOGEL & SCHEMMANN KSM 6.10.02

• Manufacturer: Vogel

Four-column machine, shooting volume 10 l, core box max. 510 x 450 x 450 mm / ___ kg, clamping/separating device, discharge carriage with lifting device, gas flushing plate, vibrating conveyor chute, control unit

1989 RÖPER / LAEMPE LKV H 5

• Manufacturer: Laempe / Röperwerk

Single-column machine, shooting volume 5 l, horizontal/vertical core box division, manual table height adjustment, vacuum clamping device, vibrating infeed chute, safety housing, electric PLC control with two-han...

1988 LAEMPE core shooting machine L-5

• Manufacturer: Laempe / Röperwerk

Shooting volume 5 l, horizontal and/or vertical core box division, vacuum clamping and separating device, hydraulic unit, safety cabin, sand hopper, electric control B+R

2013 SEGAB PROMIX 2x 200

• Manufacturer: Segab

Divided daily silo (new sand/regenerate), capacity approx. 7 m³, dedusting filter, 2 sand heater sifters, sand dosing, 2 batch mixers á 200 kg, Pep Set component dosing, steel support structure, electric PLC cont...

1993 VOGEL & SCHEMMANN KSM 6.05.00 CO2/CB/VAC/hy. Prop./SPS-99/Unterdr.

• Manufacturer: Vogel

Four-column machine, 5 l shooting volume, horizontal/vertical core box division, hydraulic table height adjustment, vacuum clamping device, vibrating infeed chute, safety enclosure, electrical PLC control with tw...

VOGEL & SCHEMMANN MISCHKA II

• Manufacturer: Vogel

Charge max. 200 kg, container Ø 770 x 400 mm, capacity max. 2.4 t/h, drive power 7.5 kW, connected loads 380 V, 50 Hz, hand lever door lock, intervention protection, emergency stop pressure switch, hinged lid wit...

Sand dosing container

Tank for volumetric sand dosing, double conical truncated cone, welded in the middle, capacity approx. 70 l / 100 kg, each with a flange-mounted, pneumatically actuated rotary valve at the inlet/outlet, flange si...

2014 KLEIN diaphragm dosing device BDG 504 (EFV)

• Manufacturer: Klein

Dosing volume 200-500 cm³, electrical (adjustment) remote adjustment (EFV)

2006 KLEIN diaphragm dosing device BDG 304

• Manufacturer: Klein

Dosing volume 200-300 cm³

2017 SEGAB cold box liquid dosing device FD

• Manufacturer: Segab

Two-component binder system, dosing pumps 2.23 l/min, 0.37 kW, switch cabinet, PLC control, dosing valves

1982 GISAG butterfly mixer AMF 160

• Manufacturer: Gisag

Mixing container, Ø 960 x 500 mm, usable capacity max. 160 dm³, discharge height approx. 675 mm, mixing blades, batch max. 200 kg, capacity approx. 3-4 t/h, pneumatic discharge gate, drive power 7.5 kW, connected...

1993 LUEBER LW-FDA 825

• Manufacturer: Lüber
• Model: LW-FDA 825

Mains/control voltage 380/220 V, 50 Hz, heat output 8 kW, cold box process

LAEMPE / RÖPER / Vogel & Schemmann 1 - 2.5 - 5 - 12 - 16 - 20 - 25 Liters

• Manufacturer: Laempe / Röperwerk

Please ask for our separate accessories and parts list!

RÖPERWERK H 40

• Manufacturer: Laempe / Röperwerk

Four-column machine, shooting volume 40 l, working area 1100 x 1000 x 1000 mm, core box max. 1000 kg, clamping/separating device, vibratory feeder, LUEBER ColdBox gas flushing unit LW-FDA1640, hydraulic unit, saf...