Used Cnc Lathes in Illinois, USA

2019 Nomura NN-32YB3

• Manufacturer: Nomura
• Model: NN-32YB3

FMB Turbo Barfeed Mist Collector Sub : Chuck sleeve /Spring/Spindle cap(1set) Automatic power turn-off device Automatic oiling device (level detector attached) Cutting oil device (Main/Sub) Coolant failure detect...

2022 Industrial Artisan

• Manufacturer: Industrial

Equipped with: -Vacuum table -Tool bits Machine type: Routers | Machine location: Florida | Stock #: 788191 | Table size: 60″ x 110″ | X,y,z working area: 48″ x 96″ x 12″ | Rapid speed: 0-900 IPM | Spindle: High ...

2010 Takisawa TNR 200YS

• Manufacturer: Takisawa

MACHINE EQUIPPED WITH Parts Catcher Chip conveyor Live tooling (6 ID turning blocks and 6 VDI od turning)

2013 Doosan Puma TT1800SY Twin Spindle/Twin Turret, Y Axis Mill Turn Lathe, LNS Alpha SL65S Bar Feed, Chip Blaster, 4782 hrs.

• Manufacturer: Doosan
• Model: PUMA TT1800SY

Full C Axis Spindle Rotation - Both Spindles Live Milling/Drilling Capability - Both Turrets Y Axis Capability on Upper Turret Twin Turret Design with Upper and Lower Turrets Dual Spindle Design LNS Alpha SL6...

2006 C.R. Onsrud Inc. 145G12

• Manufacturer: C.R. Onsrud
• Model: 145G12

The controller is currently not working other than that it is a good CNC. (17″ Under Bridge) 6 Vertical Drills in X-Axis 5 Vertical Drills in Y-Axis 2 Horizontal Drills in X-Axis 2 Horizontal Drills in Y-Axis Mov...

2004 Hurco TM-10 CNC Lathe ()

• Manufacturer: Hurco
• Model: TM10

Imperial Metric Hurco TM-10 CNC Lathe (2004) Turning Length 20″ Turning Diameter 10″ Swing 23.5″ 12 Station Turret Bar Capacity 2.99″ X-Axis Travel 9″ Z-Axis Travel 22″ Spindle Speed 3000 RPM Spindle Motor 30 HP ...

2011 Hardinge GS51 CNC Lathe ()

• Manufacturer: Hardinge
• Model: GS 51

Imperial Metric Hardinge GS51 CNC Lathe (2011) Chuck Size 8" Bar Capacity 2" Swing 17" Turning Diameter 11.1" Spindle Speed 5,000 RPM Control Fanuc 0iTD Distance Between Centers 17.95" Turret 12 Station Machine D...

1998 Daewoo Lynx 200 CNC Lathe ()

• Manufacturer: Daewoo
• Model: Lynx 200

Imperial Metric - Chip Conveyor - Tool Presetter - Parts Catcher

2021 Lenco M210 CNC Lathe ()

Lenco T-400-2000mhz control with 17″ LCD 5 HP Spindle energy efficient Motor Max 1750 rpm spindle speed with electrical speed control Hardened & Ground precision guide ways Zero backlash precision ball screws har...

2012 Feeler FTC-100 CNC Lathe ()

• Manufacturer: Feeler

2020 Haas ST-10 CNC Lathe ()

• Manufacturer: Haas
• Model: ST-10

Imperial Metric Auto Door, 6" Chuck, Tool Prsetter, Chip Conveyor

2023 Haas ST-10 CNC Lathe ()

• Manufacturer: Haas
• Model: ST-10
• Spindle bore: 58.419999999999995 millimeter

Imperial Metric Comes with Liners for 0.375"-1.5" - 1GB Onboard Memory - 30 Gallon integrated coolant tank with 3/4 HP Pump - 6000 RPM Spindle - 12 Station Turret w/ various tooling blocks - Power Failure Detecti...

Mori Seiki SL25 CNC Lathe

• Manufacturer: Mori Seiki
• Model: SL-25A

Imperial Metric Mori Seiki SL25 CNC Lathe Max turning diameter: 13.4″ | Max turning length: 20.9″ | Max bar capacity: 2.65″ | Swing over cross slide: 13.8″ | Swing over bed: 20.5″ | Distance between centers: 24.6...

2007 Hwacheon T130 CNC T-Lathe with 51.18" Swing, 35.83" Max Cut Diam., 400 RPM, 6.1" Bore, 50" Chuck, 12 Station Turret, Fanuc

• Manufacturer: Hwacheon
• Model: Mega T130

50" Chuck 6.1" Spindle Bore Manual Pulse Generator 12 Station Duplomatic Turret Coolant System is missing Tank, but includes the Pump (tank can be fabricated) Card Interface RS 232 Port Interface Machine S...

1998 Okuma LB45 CNC Lathe

• Manufacturer: Okuma
• Model: LB45

Imperial Metric Okuma LB45 CNC Lathe Okuma OSP7000 Control Chip Conveyor 12″ Chuck