Building Filters

Used Centrifugal Separators in Hiroshima, Japan

1985 Matsumoto Kikai MARK III 48×36
- Manufacturer: 松本機械
Bottom discharge type Hydraulic system Hydraulic scraping device Main unit operation panel
Kure, Japan
1999 Tanabe Wiltec O-24
- Manufacturer: タナベウィルテック
Top discharge type 24" Explosion-proof Rotation speed: 1,950 rpm Capacity: 40L
Hiroshima, Japan
2000 Tanabe Wiltech DAC-30
- Manufacturer: タナベウィルテック
30-inch, fully automatic, explosion-proof Rotation speed: 1,310 rpm Capacity: 45L
Hiroshima, Japan
Tanabe AT-48
- Manufacturer: タナベ
Wetted parts material: Cage part SUS316. Casing part: inner rubber lining / outer wall SS 48-inch fully automatic bottom discharge type. Capacity 225L Equipped with control panel and hydraulic unit. Low speed ope...
Hiroshima, Japan
1988 Tanabe AUT - 42
- Manufacturer: タナベ
42" SUS316 Fully automatic bottom discharge type, hydraulically driven. No control panel. Hydraulic drive has been converted to motor drive.
Hiroshima, Japan
2012 [Kyoritsu] Upper discharge type *Maintained
- Manufacturer: 共立製作所
18" top discharge type.　　1.800 rpm. Serviced and test run verified. Click here to see a video of the trial run (YouTube) upon completion of maintenance.
Hiroshima, Japan
Tanabe 42-inch
- Manufacturer: タナベ
42", top discharge type, perforated type. Basket SUS, others SS.
Hiroshima, Japan
2024 Tanabe Wiltech SHC-400D
- Manufacturer: タナベウィルテック
Material of main parts such as screws: SUS316 (stellited cutting edges). Currently 400V specification, but rewinding to 200V is available. Screen hole diameter 100mm Basket diameter φ400
Hiroshima, Japan
2006 Kotobuki SC-170
- Manufacturer: 寿工業
Reference treatment volume 6m3(under the condition of sludge concentration 0.91% flocculant used) Maximum centrifugal effect 2000G(Rotation speed 3200min) Deceleration ratio 1/187 Differential speed range 3 to 10...
Hiroshima, Japan
1973 Tomoe Kogyo P-3400
- Manufacturer: 巴工業
30kW 4000rpm/3200G Gear ratio: 1/165 Spare rotor included (gear ratio: 1/52) Click here for a video of the test run (YouTube) after maintenance was completed.
Hiroshima, Japan
Tanabe Willtech Z-2L (overflow type)
- Manufacturer: タナベ・ウィルテック
Main: 3600rpm/3000rpm BD: 3030rpm/2530rpm Differential speed: 10rpm/8.2rpm With spare screw Applications: Suitable for sludge dewatering.
Hiroshima, Japan
Sato S-401G
- Manufacturer: サトー
Bore diameter: 40mm Head: 11.5M Liquid flow rate: 110L/min
Hiroshima, Japan
Kotobuki Industry S3-0
- Manufacturer: 寿技研工業
22kw (explosion-proof motor) 1300～2200rpm 1300G 【Maintained Processing capacity: 5-10m3/H Serviced in 2014 -> In indoor storage Overlay thermal spraying is not performed. Please consult with us.
Hiroshima, Japan
A spiral pump
Confirmation required. Note: No inventory number. (1) Place to put.
Hiroshima, Japan
1979 HISAKA Manufacturing BFL 7 - 2050
- Manufacturer: 日阪製作所
Motor: 11 kw Material: SUS 316 Bore size: 65 × 50 Head: 20M Flow rate: 0.5 m3 / min
Hiroshima, Japan