Used Bending & Forming in Bavaria, Germany

Trusted Seller
ROLLMAK SM 90-10/3.3
- Manufacturer: ROLLMAK
- Power requirement: 1.1 kilowatt
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Sheet width: 1050mm | Plate thickness: 3,3mm | Pre-bending: 3 | 0: 90mm | Minute slide.: 130mm | Total power...
Günzburg, Germany
Trusted Seller
1969 SCHÄFER SRMVS 2500 x 7,5/4,5
- Manufacturer: SCHÄFER
Control: conventional - | Storage location: Location | Freight basis: Delivery ex location. | Sheet width: 2500mm | Plate thickness: 7.5 / 4.5mm
Günzburg, Germany
Trusted Seller
2012 FACCIN 4HEL-2122
- Manufacturer: Faccin-Biko
- Model: 4HEL
Control: Faccin | Storage location: Location | Freight basis: Delivery ex location. | Sheet width: 2000mm | Relés: 11mm | Pre-bending: 8 | Upper roll diameter: 225mm | Lower roll diameter: 215mm | Side roll diam...
Günzburg, Germany
Trusted Seller
ROLLMAK SM 90-12/3.0
- Manufacturer: ROLLMAK
- Power requirement: 1.1 kilowatt
Control: conventional - | Storage location: Factory | Freight basis: Delivery ex works. | Sheet width: 1256mm | Plate thickness: 3mm | Pre-bending: 2,5mm | 0: 90mm | Minute slide.: 130mm | Total power requiremen...
Günzburg, Germany
Trusted Seller
ZOPF P38 Evo
- Manufacturer: Zopf
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Engine: 2,8KW | Weight of the machine approx.: 320kg | Dimensions of the machine approx.: 86 x 90 x 85cm
Günzburg, Germany
2002 Long bending machine Thalmann Pico 150-6.2
- Manufacturer: Thalmann
- Power requirement: 3 kilowatt
Used Thalmann press brake, motorized shear, 5 stop fingers, laser safety device. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be perfor...
Hohenbrunn, Germany
Trusted Seller
2004 SALVAGNINI P4-2516-ALA
- Manufacturer: Salvagnini
- Model: P4
- Power requirement: 43 kilowatt
Control: CNC - | Storage location: Location | Freight basis: Delivery ex location. | Plate length max.: 2780mm | Sheet width - max.: 1500mm | Pressing length - max.: 2550mm | Bending height - max.: 185mm | Sheet...
Günzburg, Germany
2006 Long bending machine Biegemaster BS 4.2.0
- Manufacturer: Biegemaster
- Power requirement: 5.5 kilowatt
Used hydraulic bending machine with CNC touchscreen graphic control, Hydraulic material thickness adjustment, manual upper jaw preload, Motorized depth stop + conical stop, motorized roller shear. The machine w...
Hohenbrunn, Germany
1991 Jorns SuperLine-300-SO-CNC-6 long bending machine
- Manufacturer: Jorns
Well-maintained and robust hydraulic bending machine with foot pedal, retractable sheet supports, hydraulic radius adjustment, and automatic sheet thickness adjustment programmable via CNC control, with detachabl...
Hohenbrunn, Germany
2000 long bending machine Jorns ML200-SO-CNC400A-4
- Manufacturer: Jorns
Used Jorns hydraulic swing bending machine, with material thickness adjustment, hydraulics on the left side of the machine, without roller shear, bending beam with removable extension rail approx. 8mm, 3 stop fi...
Hohenbrunn, Germany
1992 Ozamech KM 3000-2.5 swivel bending machine
- Manufacturer: Ozamech
Used Ozamech folding machine, easy program angle setting on the side stand, with foot switch, removable extension rail, upper jaw rail approx. 30 degrees Machine is unrepaired, in its current condition
Hohenbrunn, Germany
Trusted Seller
ERCOLINA TB050-PT
- Manufacturer: Ercolina
- Power requirement: 1.5 kilowatt
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Bending speed: 1.25/2.5rpm | Total power requirement: 1,5kW | 毫米/分钟: 130kg | Dimensions of the machine approx.: 595x363x900mm
Günzburg, Germany
2003 Long bending machine Jorns NL125-SM-OP 2100/2-4
- Manufacturer: Jorns
Used hydraulic Jorns press brake, with foot switch, emergency stop rail, retractable sheet metal supports, hydraulic roller shear up to 1.50 mm, control with 9 bending angles. The machine has been professionally...
Hohenbrunn, Germany
1992 Long bending machine Jorns NL125-SM-OP 6x1.25
- Manufacturer: Jorns
Used Jorns hydraulic press brake, foot switch, retractable sheet metal supports, emergency stop rail, motorized shear, water seal in the upper jaw, 9-channel control, control on the swivel arm, The machine wil...
Hohenbrunn, Germany
1998 Long bending machine Jorns NL100-SM CNC400 6x1.25
- Manufacturer: Jorns
Used Jorns press brake, foot pedal, program control without stop, emergency stop rail. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be ...
Hohenbrunn, Germany