Used Agriculture in Baden-Württemberg, Germany

PD-50V/LPG - Industrial Tractor Plan - 2005

Industrial Tractor Plan, PD-50V/LPG Inv. no. 69249, built in 2005, GM-IMPCO 3.0 L gasoline engine with gas system (cylinder operation) Air brake system for trailer operation with air dryer, Grammer seats, radio, ...

Anvil with substructure

Anvil with base Anvil LxWxH 1000mmx350mmx360mm Weight approx. 250kg Anvil with base LxWxH 1000mmx500mmx850mm

Small steel angle

Small steel angle bracket LxWxH 800mmx710mmx840mm Thickness 60mm Weight 480kg

Kaiser Press 50 ton

• Manufacturer: Kaiser

Kaiser Press 50 ton - Exhibition machine / Zero operating hours - Electro-hydraulic drive - Maximum frame width including hand crank and electric unit: 1300 mm - Usable width – internal working area: max. 750 mm ...

Keyseating machine FRÖMAG RAPIDA 463 including platform & accessories

• Manufacturer: Fromag

FRÖMAG RAPIDA 463 Keyseating Machine including Platform and Accessories -Producible slot widths 3-63mm -Maximum slot length 600mm -Indexing table -In bores from 10-500mm -Feed rate 0.01-0.25mm -Infinitely adjusta...

E.Büker - Type N76 end processing machine / beveling machine

E. Büker - Type N76 End-Facing Machine / Beveling Machine -Working range 6 - 76 mm -Speed 10-1800 rpm -Power 0.75 kW -Base -Emergency stop Dimensions: LxWxH 0.7 x 0.5 x 1.4 meters / Weight 250 kg

Lutz's workbench

Lutz Workbench - Dimensions (L x W x H): 1500 mm x 700 mm x 850 mm - 3 Drawers Dimensions (L x W x H): 480 mm x 430 mm

Deep hole drilling machine MEWAG - IXION TL 500

• Manufacturer: Ixion

MEWAG - IXION TL 500 Deep Hole Drilling Machine -Drilling depth approx. 500 mm -Table size 800 x 450 mm -Rotatable support table/angle adjustable 0-360 degrees -Manual drilling stroke -Drill chuck -Various deep h...

Line drilling machine - GILLARDON GR 20-3

Line Drill - GILLARDON GR 20-3 -From the Training Workshop -3x Drilling Units -Speed Range 150-3000 rpm -Infinitely Variable Speed -Right/Left Rotation -Morse Taper MK3 -Speed Display -Foot Switch -Drill Chuck Di...

Optimum 275 G, Opti S 275 G, demonstration machine

• Manufacturer: Optimum
• Model: OPTI S 275 G

Optimum 275 G demonstration machine Technical specifications:

Rema 4-way grinding station

• Manufacturer: Rema

Rema 4-Way Sanding Station -Angle adjustable -Tilt adjustable -Oscillating -Cooling -Work light Dimensions: LxWxH 1.5x1.5x1.5 meters / Weight 450 kg

SMW Point caliper/sliding caliper

Vernier Caliper / Caliper Gauge / New - Unused SMW 4000x500mm Measuring length approx. 4000mm Jaw length approx. 500mm Vernier scale 1/20mm according to factory standard B2jcsbj0vn Scale and caliper made of alumi...

WEILER CONDOR VS 2 from University (test laboratory)

• Manufacturer: Condor

WEILER CONDOR VS 2 from the University (Test Laboratory) -Guideways "As Good as New" -Center height 165mm -Swing diameter over bed 330mm -Center width 800mm -Speed range 28-2800 rpm -Automatic longitudinal/transv...

Bosch Scintilla SA 2 607 220 133 scraping machine / hand scraper

• Manufacturer: Bosch

Bosch Scintilla SA 2 607 220 133 Scraper / Hand Scraper -Type number 2 607 220 133 -Voltage 220 V -Power 220 W -Current consumption 1.05 A -Code number 332