
Niles Bement Pond 96 Inch VBM
- Manufacturer: Niles
Vertical Boring Mill -EQUIPPED WITH- 96" 4-Jaw Chuck/Face Plate (2) Swiveling Rams Travelling Rail 220/440/3/60 Electrics **Requires 3' Bearing Pit**
Town of Rockingham, VT
1930 Niles F2-72
- Manufacturer: Niles
Vertical Boring Mill ***Pit Required*** Actual swing: 74" | Max height under toolholder: 60" | Max height under crossrail: 67.75" | Bar travel: 57" | Table diameter: 70" | Table speeds: 1.3 - 26 RPM | Table m...
Town of Rockingham, VT
Niles 60 Inch VBM
- Manufacturer: Niles
Vertical Boring Mill -EQUIPPED WITH- 60" 4-Jaw Chuck (2) Rams w/30" Ram Travel & 45 Degree Swivel 40" Under Rail(More if Readout Removed) Gurley Precision Instruments Digital Readout Variable Speed Variable Feed ...
Town of Rockingham, VT- Trusted Seller

Niles Simmons 5-Axis Heavy Duty N50MC / 6000 CNC Slant Bed Milling Center – 4 Longitudinal Guideways
- Manufacturer: Niles
- Model: N50MC-6000
- Spindle bore: 225 mm
Siemens 840D Power Line CNC Control Chip Conveyor C-Axis Indexing – 0.001 Degree 3 x NC Steady Rest Slides 96 Position Automatic Tool Changer Position Tool Monitoring for Wear & Breakage Tool Life Monitoring Sist...
Marietta, GA 
Niles 72X300
- Manufacturer: Niles
Manual Engine Lathe -EQUIPPED WITH- Long Boring Attachment & Boring Head Guide on Saddle
Town of Rockingham, VT
Niles 92X960
- Manufacturer: Niles
Heavy Duty Engine Lathe -EQUIPPED WITH- Threading to 30FT Taper Attachment Rapids 60" 4-Jaw Chuck (2) Steady Rest Misc. Tooling & Boring Bars **Lathe set up with 20' Bed Sections, (3) Extra Section go with Lathe**
Town of Rockingham, VT
1941 Niles AP48FB
- Manufacturer: Niles
- Spindle bore: 174.63 mm
Heavy Duty Engine Lathe -EQUIPPED WITH- Steady Rests Carriage Feeds Inch Threading Taper Attachment Coolant Pump
Town of Rockingham, VT- Trusted Seller

NILES SIMMONS N50UC CNC LATHE
- Manufacturer: Niles
For sale: NILES SIMMONS N50UC CNC LATHE Also available: - [2005 FPT RONIN M60 MOVING COLUMN MILLING MACHINE](https://www.assetsforsale.com/listings/8016564-used-2005-fpt-ronin-m60-moving-column-milling-machine)...
Brescia, Italy - Trusted Seller

1998 NILES N20 LT
- Manufacturer: Niles
- Model: N20 LT
Technical details Siemens 840 D control system Swing diameter over cross slide 650 mm Max. speed 3800 rpm Spindle diameter in front bearing 150 mm Spindle bore 92 mm Spindle head A8 DIN55026 Number of tool...
D - Lieferant/ Abgeber - Trusted Seller

WMW-NILES Lathe
- Manufacturer: Niles
- Power requirement: 16 kW
Back lathe WMW-NILES DH 250/4 Additional information: Turning spindle head according to DIN 55021 size 8 Inner spindle of the turning spindle 5 MK Bore of the turning spindle 27 mm Swivel range of the rear slide ...
Zschepplin, Germany - Trusted Seller

Niles 40" x 82' Engine Lathe
- Manufacturer: Niles
Imperial Metric Niles 40" x 82' Engine Lathe 150HP RPM 490-1260 42" 4 jaw chuck Center lead screw RPM Range: - 212-1,000 Direct Drive - 29-211 Back Gear Digital Tach Lathe was purchased `1992 as Navy surplus. It...
Elk Grove Village, IL 
WMW Niles DLZ630 3000 E IV
- Manufacturer: Niles
- Model: DLZ 630
WMW Niles Heavy Duty Turning Centre with DRO Type:DLZ630 3000 E IV Turning length:3000mm Max. turning diameter above the bed:630mm Turning speed:22,4– 1120 rpm Spindle bore:72mm With MULTIFIX Please Note: The ab...
Belgium
WMW Niles DLZ630 3000 E IV
- Manufacturer: Niles
- Model: DLZ 630
WMW Niles Heavy Duty Turning Centre with DRO Type:DLZ630 3000 E IV Turning length:3000mm Max. turning diameter above the bed:630mm Turning speed:22,4– 1120 rpm Spindle bore:72mm With MULTIFIX Please Note: The ab...
Belgium
1962 Niles DZ 1250x800 #1077-HDM0109
- Manufacturer: Niles
- Power requirement: 54 kW
Four-path bed 2000 mm boring bar 3000 mm boring bar The technical data are manufacturer's or operator's specifications and therefore non-binding for us. We reserve the right to prior sale; our terms and condition...
Dorsten, Germany- Trusted Seller

1985 WMW NILES DFS 2/2
- Manufacturer: Niles
- Model: DFS 2/2
with lynette Chuck part turning and between centers max. diameter : 410 mm max. length : 1.200 mm ----------------------------------------------------------------------- turning spindle bore approx.: 90 mm lathe ...
Zschepplin, Germany

