Used processing

FongeX 8" wide Steelbelt Cleated Metal Chip Conveyor [PARTS]

• Manufacturer: Correa

Mild steel construction, for handling metal chips and slats 8" wide steel hinged belt with 3/4" cleats and flared side panels On-loading length of the belt is 48" Belt discharge height is 36" Overall length: 88" ...

22" Wide Stainless Steel Incline Conveyor - No Belt [PART]

• Manufacturer: Correa

22" W between sides Inclined leg is 80" L Bottom Loading Horizontal leg is 14" L 6" Floor to infeed 67" Discharge Height Carbon Steel Belly Pan (Magnet Sticks), Stainless Sides/Frame Currently on a 45° angle 90W,...

48 in Cleated Belting

• Manufacturer: Correa

(1) 51 ft. long section. 48 in. wide.

30in Wide x 18ft Long Belt Feeder

Feed Rates: 4 TPH - 1.5ft/min 8 TPH - 3.0ft/min Height, Ground to Top of Belt: (29) Top Idlers (2) Bottom Idlers Overall Dimensions:

Stainless Food Grade Belt Conveyor 96" Wide 28'L 460V 3PH 16 FPM

• Manufacturer: Correa

Conveyor in good used condition. Removed from a working environment. Was used in a food processing plant. All stainless construction. Conveyor consists of 3 sections bolted on 2" stainless tube frame on leveling...

Puritan 16"W x 68"L Magnetic Belt-Free Incline Chip Conveyor 230/460V 3PH

• Manufacturer: Correa

Drive type, motor specs: Direct drive. 1/4Hp 230/460V 3PH 80:1 Gearbox Voltage tested at and wired for:: 460V 3PH If this item ships as Flat Rate Freight please see details in Shipping tab

Hartzell A03-9-122 Backward Incline Centrifugal Blower 13" Fan Belt Drive 3Hp

• Manufacturer: Hartzell

Used. In new condition. From spare parts storage. Backward incline 13" impeller. 3 hp 230/460V 3ph motor Wire for 480V 2000 cfm 13" inlet flange. Output 9.5 x 13" If this item ships as Flat Rate Freight please se...

Dorner 2200 Series 12"x 10' Incline Belt Conveyor 115V Variable Speed 114FPM

• Manufacturer: Dorner

Dorner aluminum conveyor on steel adjustable leg supports. Motor & Gearbox: 10:1 Bodine DC gearmotor 130V 1/3Hp. Bed Height (From Floor): Lowest height is 9" Infeed to 35" at top. Highest setting is 7" Infeed 5...

18.5"W x 8' 8" Slider Bed Conveyor 16" Grip Belt 115V 1PH Variable Speed 58FPM

• Manufacturer: Valley Forge

Voltage tested and wired for:: 115V Product Videos If this item ships as Flat Rate Freight please see details in Shipping tab

124" Center Drive Slide Bed Conveyor 18" Plastic Chain Belt 130FPM 208-230/460V

• Manufacturer: Cannon Equipment

Tested and works as it should. Center Drive 3 Phase If this item ships as Flat Rate Freight please see details in Shipping tab

HFA 2200 Series 16"W x 17' 4" Incline Drying Conveyor 120V Torn Belt Bad Fans

• Manufacturer: Correa

Bed Height (From Floor): Conveyor is on adjustable t-slot frame and legs. 28"-60" on infeed. 116" max at the top. Has angle adjustment on both legs. Voltage tested and wired for:: 115V Product Videos If this item...

Automotion 24"x 45' Belt Drive Zero Pressure Roller Conveyor 460V Center Drive

• Manufacturer: Correa

Motor & Gearbox: 1.5Hp 230/460V 3PH 10:1 Gearbox Rollers set on high on frame or below frame?: High Voltage motor is currently wired for:: 460V Zero pressure roller conveyor with air actuated lift rollers to acti...

52"x 87' MatTop Roller Belt Conveyor 15Hp 3PH End Drive 10'H Variable Speed VFD

Drive Type: Direct Drive End Drive. NOTE: Includes control panel with Allen Bradley 525 VFD drive. Panel is disconnected. Motor & Gearbox: Sew Eurodrive KA77/T DRN160M4 15Hp 230/460V 3PH Motor 23:1 Gearbox Shipp...

64" Tabletop 3" Double Belt Bottle Conveyor 0-100 FPM Variable Speed Chain Drive

Conveyor in good used condition. Tested and running. Double belt chain drive unit on a steel base with an aluminum top. Set up with a variable speed drive 120V input. 460V 3Ph motor gear drive unit. 0-100 Ft/mi...

Roach 33"x 36" Slider Bed Conveyor 27" Belt .5Hp 230/460V 3PH End Drive 55 FPM

• Manufacturer: Roach

Motor & Gearbox: 1/2Hp 230/460V 3PH 30:1 Gearbox If this item ships as Flat Rate Freight please see details in Shipping tab