Used Correa Processing in Illinois, USA

Yucho Group Model X-10001H Nitrogen Freezer Tunnel – 60” Wide Belt

• Manufacturer: Correa

52603002 Used Yucho Group Limited Model X-10001H Nitrogen Freezer Tunnel. 60" wide x 454" long belt. 3 phase, 220 volt, 12 amps. Touch screen controls. Overall dimension: 78" side x 454" long x 65.5" tall. Built ...

Gravity Loader #3 – 8" Wide Track – 16.5" F to C

• Manufacturer: Correa

Track Width – 8″ Floor to Bottom of Chute – 16.5″ Thank you for viewing

CMS CB61224 COOLING BELT 17790

• Manufacturer: Correa

One (1) used CMS model CB61224 cooling belt measuring 23 ½” wide x nominal 61″ long. Two spring loaded chrome rolls with rotary unions feed the stainless steel cooling belt. Discharge has a pin bat for breaking u...

LTG Conveyorized Tempering Oven – 500°F Max | 800,000 BTU/hr | 48” Belt | Natural Gas | 20' Conveyor

• Manufacturer: LTG Technologies

53644001 Used LTG Conveyorized Tempering Oven. 500 degrees F max temperature; 800,000 BTU/hour; Natural gas powered; 48" belt width; 20' conveyor; New blower fan. 3/60/480V. Built 2000. Previously used for steel ...

Industrial Belt O Matic Belt Dryer Model 320B – High-Efficiency Continuous Drying

• Manufacturer: Belt-O-MaticBelt-O-Matic

51487002 Used Belt O Matic Belt Dryer, Model 320B. 6 5" wide by 245" long; 3 phase/480 Volt/40 Amps;LP/natural gas; 5-7 PSI pressure Range; 1,000,000 BTU rating; 10,000 maximum CFM; 7.5 HP fan, maximum drying air...

SARG Incline Belt Conveyor with Hopper & Cleated Belt

• Manufacturer: Correa

72889002 Used SARG Incline Belt Conveyor. Stainless steel construction. Hopper. Cleated belt, approximate 8" wide x 5-1/2" center x 1-1/2" tall. Driven by 0.22kW, 3/60/277/480 Volt, 1620 rpm motor. Approximate 52...

Thayer Gravimetric Belt Feeder | Precision Weighing & Feeding System for Industrial Applications

• Manufacturer: Thayer

44496019 Used Thayer Gravimetric Belt Feeder. Approximate 15" wide x 42" long feed belt. Includes PI-164 programmable integrator, motorized rotary valve at belt discharge. Feeder mounted on a stand supplying appr...

AGI 18.5" Wide Mobile Inclined Conveyor – Stainless Steel Frame

• Manufacturer: Correa

53844018 Used AGI Industrial Mobile Inclined Cleated Conveyor System. Approximate 18-1/2" wide x 6 ft long, cleated belt. Cleat 8" x 2" tall. Driven by .5hp, 3/60/460 volt, 1730/58 rpm gear motor. Control panel w...

CVC Technologies CVC1101 Cleated Belt Conveyor – 85” Discharge Height

• Manufacturer: CVCCVC

72315002 Used CVC Technologies Cleated Belt Conveyor, Model CVC1101. Approximate 4-1/2" wide cleated plastic belt. Belt is set on 2-3/4" center line, cleat 4-1/2" wide x 1-1/8" tall. Hopper with cover. Approximat...

Inclined Belt Conveyor – 26” Wide Belt | 126” Discharge Height | 153” Overall Length | Mild Steel Frame

• Manufacturer: Correa

73440001 Used Inclined Belt Conveyor. Mild Steel Frame. Belt width: 26", Discharge Height: 126". The overall length from the discharge end to the end of the hopper is 153".

Wirtz Mfg Co. Paste Conveyor – 350” x 12” Belt Conveyor

52730013 Used Wirtz Mfg Co. Belt Conveyor, Model Paste Conveyor. Approximate 350" long x 12" wide conveyor. Driven by a 1/2hp, 3/60/230/460 volt, 1700rpm gear motor. Painted carbon steel frame. Serial# 4319-BRS-4...

52″ Exit Goessling Parts Conveyor

• Manufacturer: Correa

6″ belt width 1″ belt divider height Entry height 9.5″ from floor to top of guarding

Ralston Inclined Cleated Belt Conveyor – 8.5" Wide Belt, Adjustable Height, 61" x 42" Hopper

• Manufacturer: Ralston Metal Products

73460001 Used Ralston Metal Products Inclined Cleated Belt Conveyor. 114" Overall height on low rise casters; 8.5" Cleated belt width; 2" Cleat height; 6" Cleat spacing. 108" exit discharge height (bottom lip) on...

Pneumatic Lift Dual Belt Case Mover

• Manufacturer: Correa

PNEUMATIC LIFT DUAL BELT CASE MOVER Non-domestic product: No