Used Correa Machine Tools

2018 CORREA AXIA 85

• Manufacturer: Correa
• Model: AXIA 85

Check out the Correa Axia 85 with 5-axis technology. This used vertical machining center by CORREA offers impressive specs: X: 4,000 mm, Y: 2,000 mm, and 5 axes for enhanced precision. With a programmable speed o...

Correa FP 50/50 CNC Bridge Type Machining Center

• Manufacturer: Correa
• Spindle taper: ISO 50

Rebuilt & Retrofitted in 2025 Heideinhain iTNC 640 CNC Control Milling Head: Head Type Automatic Auto-index. differential/UAD(0,1º) Tool clamping system - Hydraulic Taper nose - ISO 50 (DIN69871) / Tirante-P...

Vibromatic 24"W Incline Feed Conveyor

Vibromatic 24"W Incline Feed Conveyor, 48" Incline x 96" Long x 24" Wide (Location: Post C-3)

2005 Nicolas Correa FP 3035 CNC Bridge Type Vertical Machining Center

• Manufacturer: Correa
• Model: FP 3035
• Spindle taper: ISO 50

Features: Heidenhain i530 CNC Control CH-40 Auto-Indexing Right Angle Milling Head 30-Station Automatic Tool Changer Equipped With: Heidenhain i530 CNC Control CH-40 Auto-Indexing Right Angle Milling Head 30-Stat...

Hennig 44"x 9' 6"L CNC Chip Conveyor 40"Belt 38" Discharge 230/460V 3PH 8FPM

• Manufacturer: Correa

Condition: In good working condition, cleaned and tested in our shop. Set up with hand/auto and forward/reverse switch. Drive type, motor specs: Chain drive. 1/4Hp 208-230/460V 120:1 Gearmotor Voltage tested at...

Enomoto Hinge Belt CNC Chip Conveyor 16"x 62" Infeed 31" Discharge 220V 3PH

• Manufacturer: Correa

In Good Used Condition. Tested and cleaned in our shop. Enomoto Chip Conveyor. -Chain guard is missing. Conveyor has an added chute welded on top of frame. Add on chute measures 16"W x 12"H x 66.5"L Measurement...

Enomoto Hinge Belt CNC Chip Conveyor 16"x 62" Infeed 36-42" Discharge 220V 3PH

• Manufacturer: Correa

In Good Used Condition. Tested and cleaned in our shop. Enomoto Chip Conveyor. Conveyor has an added chute on top with drain trays. This chute can be removed. Add on chute measures 15.75"W x 12.5"H x 66.5"L Dra...

Tsubaki Mayfran CS-1 Dual Belt Chip Conveyor Scraper Separator Coolant Filter

• Manufacturer: Correa

In Good Used Condition. Tested and cleaned in our shop. Tsubaki Mayfran CS-1 Dual Belt Chip Conveyor. Hinge belt on top with drag chain separator underneath and drum filter. If this item ships as Flat Rate Freig...

Enomoto BEA MA-500H Flat Chip Conveyor 20" Belt 40" Infeed 220V 3PH 9' 2"OAL

• Manufacturer: Correa

In Good Used Condition. Tested and cleaned in our shop. Enomoto Model MA-500H. If this item ships as Flat Rate Freight please see details in Shipping tab

Enomoto Hinge Belt CNC Chip Conveyor 16"x 62" Infeed 31" Discharge 220V 3PH

• Manufacturer: Correa

In Good Used Condition. Tested and cleaned in our shop. Enomoto Chip Conveyor. Conveyor has an added chute welded on top of frame. Add on chute measures 16"W x 12"H x 66.5"L Measurements with top chute on as pic...

4 CU FT ROTO-FINISH "SPIRATRON" TUB-TYPE VIBRATORY DEBURRER w/PNEUMATIC GATE - OVERHEAD BELT TYPE FEEDER - TIMER

4 CU. FT. ROTO-FINISH "SPIRATRON" VIBRATORY BOWL-TYPE DEBURRER EQUIPPED WITH: Process Timer Pneumatic Gate Overhead Belt Type Feeder CATALOGUE SPECIFICATIONS: Cubic Feet Capacity, Maximum .......... 4 CU FT Debur...

1998 NICOLAS CORREA EURO 2000

• Manufacturer: Correa
• Model: Euro 2000

Nicolas Correa Euro-2000 Bridge-Type CNC Vertical Machining Center, Fanuc Series 16i-M Controller, 12000 RPM Spindle, Liquid Chiller, Telescopic Way Covers Tool changer needs attention. Everything else in good op...

Metal Chip or Scrap Conveyor With Cleated steel belt 7.5" X 7'

• Manufacturer: Correa

“tested and works properly.” Metal Chip or Scrap Conveyor Cleated steel belt 7.5" X 7' Single phase 3/4 HP baldor motor Currently wired for 115 volt and works great. Shipping weight is 565 Lbs INV # P-100