Used Input/Output Modules in Arizona, USA

Johnson Controls F4-XPM04060-0 Facility Explorer Expansion Module, 10-Pt In/Out [New]

• Manufacturer: Johnson

. . . . . Johnson Controls F4-XPM04060-0 Facility Explorer Expansion Module, 10-Point Input/Output, MS/TP Communication, 24 VAC Input The F4-XPM series expansion I/O modules can serve in one of two capacities dep...

Alerton Honeywell EXP-1048 I/O Expansion Module for VLX, 10 Uni In, 4 Bi Out [New]

• Manufacturer: Honeywell

. . . . . Alerton Ibex Honeywell EXP-1048 I/O Expansion Module for VLX, 10 Universal Inputs, 4 Binary Outputs, 8 Analog Outputs. Alerton. Honeywell. EXP-1048.

Opto 22 SNAP-AOVA-8 8-Ch Analog Multifunction Output [New]

. . . . . The SNAP-AOVA-8 analog output module has 8 channels, each individually configurable for any one of six voltage or current output ranges. Voltage: 0 to 5 VDC 0 to 10 VDC -5 to +5 VDC -10 to +10 VDC Curre...

Johnson Controls XP-9102-8204 Metasys XP9102 Extension Module 6 Analog in 2 Out [New]

• Manufacturer: Johnson

. . . . . The XT-9100 Extension Module and XP-910x Expansion Modules have been designed to provide additional input and output capacity within Metasys Networks, specifically for the DX-9100 Extended Digital Plan...

Opto 22 DA5 G1 0-10 VDC Analog Output [Refurbished]

. . . . . Opto 22 DA5 G1 0-10 VDC Analog Output. Opto 22. Opto 22. DA5.

Opto 22 SNAP-MODTOOL SNAP I/O Module Removal Tool (10 Pack) [New]

. . . . . Opto 22 SNAP-MODTOOL SNAP I/O Module Removal Tool (10 Pack). Opto 22. Opto 22. SNAP-MODTOOL.

Johnson Controls XT-9100-8304 Extension Module for DX-9100 Extended Controller [New]

• Manufacturer: Johnson

. . . . . Johnson Controls XT-9100-8304 Extension Module for DX-9100 Extended Digital Controller. Johnson Controls. Johnson Controls. XT-9100-8304.

Opto 22 G4AD10 G4 100 Ohm Platinum RTD Analog Input, Single Channel, Isolated [Refurbished]

RTD input: 100 Ω platinum (α = 0.00385). Nominal temperature range: -50 to 350 °C, -58 to 662 °F. Over/under range: -72 to 812 °C, -97.6 to 1493 °F. Accuracy: *±0.8 °C *Accuracy figure requires use of gai...

Eaton EU5E-SWD-4D2R SmartWire-DT I/O Module [New]

• Manufacturer: Eaton

Eaton SmartWire-DT I/O module, 1 contact, four digital inputs and two digital relay outputs, Status indication LED -Yellow,10V. Eaton. Eaton Corporation. EU5E-SWD-4D2R.

Opto 22 IDC24 G1 DC or AC Digital Input, 10-32 VDC or 12-32 VAC, 24 VDC Logic [Refurbished]

. . . . . Opto 22 IDC24 G1 DC or AC Digital Input, 10-32 VDC or 12-32 VAC, 24 VDC Logic. Opto 22. Opto 22. IDC24.

Opto 22 IDC15B G1 DC or AC Digital Input, 4-16 VDC/VAC, 15 VDC Logic, High Speed [Refurbished]

. . . . . Opto 22 IDC15B G1 DC or AC Digital Input, 4-16 VDC/VAC, 15 VDC Logic, High Speed. Opto 22. Opto 22. IDC15B.

Opto 22 ODC24A DC Output 5-200 VDC, 24 VDC Logic [Refurbished]

. . . . . The ODC24A output module is used for controlling or switching DC loads of 5-200 VDC. Each module provides 4000 volts (transient) of optical isolation between the field devices and the control logic. Typ...

Opto 22 OAC5 G1 Family AC Digital Output, 12-140 VAC, 5 VDC Logic [Refurbished]

One Cycle Surge: 80 amps peak. Peak Repetitive Voltage: 500 Volts. Operating Ambient Temperature: -30 to 70 °C. Isolation, Input-to-Output (Transient): 4,000 Vrms. Minimum Load Current: 20 milliamps. G1 I/O fami...

Opto 22 IDC5BQ Quad Pak 4-Channel DC Input 4-16 VDC, 5 VDC Logic, High Speed [New]

Operating ambient temperature: -30 degree to 70 degree C. 4,000 Vrms Isolation input-to-output. 0.4 volts at 50 milliamperes Output voltage drop. 50 milliamperes Output current. 100 microamperes maximum at 30 VDC...

Opto 22 DA3 G1 4-20 mA Analog Output [New]

. . . . . Opto 22 DA3 G1 4-20 mA Analog Output. Opto 22. Opto 22. DA3.