Used processing

Biner-Ellison rotary filler TD-36-16

• Manufacturer: Biner Ellison

Item is a used, Biner-Ellison, 16 valve, rotary filler. This is a top drive machine with motor and power transmission assembly mounted on the top of the machine. This is a pressure/overflow style machine having 5...

New Stock Letina 225Lit Biodynamizer with Barrique Barrel

• Manufacturer: Letina Inox

Letina Biodynamizer: Easily mix larger quantities of biodynamic preparations, while remaining faithful to the principles set by Dr. Rudolf Steiner. Along with the Dr. Rudolf Steiner Center from Donji Kraljevec a...

New Stock Letina 620Gal/2350L Forkliftable Variable Capacity Jacketed Tank

• Manufacturer: Letina Inox

Item is a new stock Letina PV2350 jacketed forkliftable tank with a full wrap around jacket that covers the tank from the bottom of the sidewall to the top. This jacket offers exceptional cooling ability. Specifi...

Resina U-40 S/S Inline Capper

• Manufacturer: Resina

Used Resina model U-40 Inline capper. The machine is a fully automatic capper utilizing four pairs of tightening quills, with clutches on the last three pairs. It was manufactured in 1988 and has the stainless st...

Consolidated TG-14-31 Capper

• Manufacturer: Consolidated

Used Consolidated, rotary capper, model TG-14-31. The machine was manufactured in 1987. The machine has 14 capping heads and is equipped with 'Torque-Open' chucks. It is rated at a Normal Operating Rate of approx...

Resina S-40 Capper

• Manufacturer: Resina

Used Resina, single spindle, model S-40 capper. This is a fully automatic capper. It is equipped with a single, back container gripper and operation is from right to left. This machine is equipped with the lift p...

Cap/Bottle Hopper/Elevator

Used cap/bottle hopper-elevator. The machine is all stainless steel construction. The hopper is approximately 7 feet long by 6 feet wide at the top. The bottom tapers to the width of the elevator belt which is ap...

Pneumatic Scale 16 Head Capper

Used 16 head, Pneumatic Scale, plastic over-capper. This is not a screw capper, but a press-on overcapper. Included with the machine is the cap feed system and the Hoppman model FT150-1L-CRS sorter. This is a sta...

NEW ENGLAND MACHINE CAP HOPPER/ELEV.ATOR/SORTERATOR

Item is a used New England Machine, S/S cap hopper/elevator-sorter. The elevator is 20" wide and approximately 8' tall. This is a vertical (waterfall style) cap sorter. It was utilized with NEM dual head capper (...

New England Machine Dual Head Capper

Item is a used, New England Machine Dual Head Capper. It was utilized to run large diameter caps, (83MM and larger) on square/rectangular containers of pretzels (no container handling parts are included). A short...

Accumulation Disk 36 inch

NEW 36 inch unscramble/accumulation disk. The disk is of heavy duty construction utilizing a stainless steel disk with a 3/16 inch SS support disk. The frame is also stainless steel and constructed of 1 1/2 inch ...

2013 NJM Packaging BTORQCA-AO1 Cap Hopper/Elevator/Sorter

• Manufacturer: NJM

Item is a used NJM Packaging Cap Hopper/Elevator/Sorter. Machine is S/S construction with the hopper being approximately 42" x 42" at the top. The flights are 10" wide and spaced at approximately 3" intervals. Th...

New Stock Letina 1070Gal/4050L Forkliftable Variable Capacity Jacketed Tank

• Manufacturer: Letina Inox

New Stock Letina 1070 Gal / 4050L VC jacketed tank with the following specifications- — volume approx. 4050 lit — coat diameter 1593 mm, height 2000 mm — total height approx. 2850 mm — closed stand with forkl...

New Stock Letina 396Gal/1500L Forkliftable Variable Capacity Jacketed Tank

• Manufacturer: Letina Inox

New Stock Letina 396Gal/ 1500L VC jacketed floating lid tank with the following specifications: — volume approx. 1500 lit — coat diameter 1116 mm, height 1500 mm — total height approx. 2100 mm — closed stand ...

MRM/ELGIN Husky 12 head

• Manufacturer: Elgin

Item is a used MRM/Elgin model Husky 1, 12 head rotary pressure/gravity filler. The machine is all stainless steel construction. Rotation is counterclockwise (right to left) with feed-screw infeed.. Valves are 5/...