Used processing in Wallonia, Belgium

2009 Temperature measurement lance, bar, new

• Manufacturer: HERAEUS ELECTRO-NITE

Construction year: 2009, weight: 20 kg lance, length 1600 mm, 45° With cable and contact bloc

Vibrating chut 2600mm, Ø 215mm

Motor LOSENHAUSEN Type 1400/1000, 220/380 V Length between In-and output 2600mm, Ø chut 215mm, Length Feet 2700mm Motor under the chut, behind

Rubberbelt conveyor 2750 x 300

Drum motor BONVILLAIN, 220/380 V Ax distance 2750 mm, flat band with small bunker and border at side

Small hopper with discharging belt EA 1450mm

Motor 2 hp, 220/380 V, 1415 rpm Band width 500 mm 6 rolls width 600 mm Driven by one trapez belt, flat gear

Transport belt 6000 x 500mm

Moteur SEW, 2,2 KW, 220/380 V Ouitside dimensions: 6000mm x 750mm, h. 500mm | Inside dimensions: 6000 mm x 500 mm

1988 Fuel burner KLÖCKNER

• Manufacturer: Kloeckner

Type: KL 35.17 Serial number: 0028348 Year of construction: 1988 Outside dimesnions: 740 mm x 480 mmn, h. 400 mm

Water press pump for lining spayer

• Manufacturer: GRUNFOS

With surge tank 100 l and control box Weight: ± 200 kg | Motor: 1,5 kW, 2900 rpm, 240/415 V | Pressure: up to 15 bar, 4 m³/h

Discharging belt, width 650mm

Axdistance 1500 mm Dimensions: 1800 x 950 mm, maximum width  650 mm

1993 Vertical band sawmachine STARTRITE, table 500 mm x 500 mm

• Manufacturer: Startrite

Type: 14S5, serial number: 97593 Width 560 mm, deptht 820 mm, height 1850 mm 5 speeds from 300 up to 1700 mm/s

Frequency converter LOHER, 293 Hz, 200 V, 10 KVA

• Manufacturer: Loher

Motor type SN60M-29, serial number 5205774, 8,5 kW, 2915 rpm, 220/380 V Fixed to a frame With old control box

Roller conveyor with tilt unit 45°

Inside width 850mm. 1 roller conveyor with 9 rollers, with 4 lifting pneumatic rubber balloons 2 forks (hydraulic) tilting ideal for lifting from sandmoulds up chake out or conveyor

Band wood saw Ø 700mm ERPHI, table 760x760mm

• Manufacturer: ERPHI

Outside dimensions: 950 x 1300, h. 2150 mm Useful dimensions table: 760 x 760 mm Motor:  3 Kw, 380/660 V, 1440 rpm, transition 700mm

Wheels for shake out drum, Ø 400mm, width 250mm

Brand: FAG, type: GGG Not powered Weight: 450 kg each | Outside dimensions: 640 x 410, h. 500mm

Sandaerator AXMANN, capacity 12 t/h

• Manufacturer: Axmann

In good condition With 3 knives Rests on pins and envelope in the inside Can not be interchanged Projects the sand upwards Machine on wheels

Small casting ladles ROPER, 300 kg

• Manufacturer: Kleine

With oilbath gearbox In good working condition Outside dimensions: length 1100 mm, h. 850 mm | Inside: Ø 450 mm, h. 500 mm