Used processing in Wallonia, Belgium

Screw conveyor 2800 mm, Ø 150 mm

Useful length 2800 mm, Ø 150mm 2 kW, 1425 rpm, 220/380 V, 9/5,2 A Entry 570 mm x 370 mm Exit Ø 210 mm

1972 Sand conveyor 200 l, KLEIN

With 2 level detectors Weight: 300 kg | Outside dimensions: Ø 700 mm, h. 1800 mm | Pressure: 8 bar, 100 °C

Band for bucketelevator 25,4m x 660 mm

± 34 buckets, 630 x 340 mm, depth 230 mm Tap-dimensiosn of the buckets 750 mm, buckets of steel

Belt aerator 300 mm, 8 t/h, HWS

Type: NS300, serial number: 6832/2/3-3 2,2 kW; 220/380 V; 3 hp 2 iron wheels, Without sraper, without magnet

Discharging belt 1500 x 600mm

Gearmotor, 3 KW, 220/380 V, 1450/55 rpm Direct flanch-connected on the drum, with closed box above Rubberwaterproofedband, and security cable

Rubberbelt conveyor flat 11000 mm x 620mm

Motor reductor Width with motor ± 1400mm Width of the rolls 725mm Ø bobin ± 240mm, lenght 750mm With 4 systems for work supply

Rubberbelt conveyor, 4000 mm x 740 mm, flat

Rolls Ø 380 mm With guidance on the sides along the entire length, with cleaning blade on the belt conveyor, with solid construction Motor with angle gearbox

Teapot spout ladle COLLIN, ± 2,5 t

With lining Weight: 1754 kg | Outside dimensions: 1750 mm x 1300 mm, h. 2050 mm | Useful dimensions: Ø 960 mm, h. 1050 mm

Sand aerator VEB, on wheels Gisag

• Manufacturer: Gisag

With rubberband and drived impactbar rotor on the outlet capacity: 6 - 8 m³/h On rubber wheels In good working condition

Sand aerator VEB,Gisag on wheels

• Manufacturer: Gisag

With rubberbelt and drived impactbar rotor on the outlet , capacity: 6 - 8 m³/h Bandspeed 0,88 m/s, on rubberwheels

Transport and dosing worm screw, useful length 1000, Ø 150mm

Gearmotor LEROY SOMER, 1,1 kW, 910/33,3 rpm, 220/380 V Direct drive in line Inlet 140 x 140mm With control and drain cleaning cover under Ø 150mm Outlet Ø 150mm

Belt conveyor 3100 x 800mm

Drum motor BAUER Without iron feet where the belt above or below runs Conveyor more or less well Belt width 970 mm, Ø 220mm

Sall square tank EMDE with dosing screw

Motor first screw NORD, 0,25 kW, 220/380 V, 1330 rpm Lowest cone length 500 mm, below 150 mm With silence bloc, with vibration motor, with dosing screw, with a primary crusher above the screw (to break up the clu...

Casting ladle, 2,8 - 3 t, brand KETTIN THIRIART

Outside: 1850 mm, h. 2000 mm Inside: Ø 1000 mm, h. 1020 mm Weight: 600 kg

Screw for high spped mixer, capacity 5 - 6 t/h

• Manufacturer: SAPIC

Overall length 2100 mm, in good condition Motor LEROY SOMER 4 KW, 5,5 hp, 1430 rpm, 220/380 V Ø 260 mm, distance between entry and exit 800 mm Height between entry and exit 580 mm, entry 350 x 190 mm