Used processing in Switzerland

1996 PLATARG 2513

• Manufacturer: PLATARG

Can be tested in operation Max. Flywheel speed: 760 1/min. Capacity on one stage approx. 25T Clutch engagement max. 10/min Air pressure 5.5 bar (min) - 5.8 bar (max) Total deceleration time Braking <250 ms Zig...

1977 PLATARG 611

• Manufacturer: PLATARG

A new electrical control system and a mechanical and lubrication rebuild are required. One used PLATARG model 611 transfer press, high speed type. Full follow cams. Number of stations: 12 Number of rams: 11 + 1 s...

1969 PLATARG 312

• Manufacturer: PLATARG

This machine can have the following installed/added to it (not included) o new lubrication o new electrical installation o new protections o CE conformity Number of station 13 (12+1). Capacity on any one station ...

2000 BENELLI 650T/3MR/2/12/3750X1100/LD/ET3

• Manufacturer: Benelli

Press equipped with 2 feeing lines - one from the side for blank cutting in transfer mode and one in line for for progressive die operation.

2007 SCHMID HSR400

• Manufacturer: Schmid
• Model: HSR400

including coil line SARONNI with direct feed - hydraulic opening for cleaning - band guides at outlet - proportional pressure reducer for drive rollers

FEINTOOL GKP 250

• Manufacturer: FEINTOOL

Complete refurbished fineblanking press: * disassembly into individual parts * findings of all components (crack test) * overhaul of the drive * overhaul of the guides * overhaul of the impression cylinders * ove...

2002 MIOS T20 FV

• Manufacturer: Mios

Object: 53991 | Spigot hole diameter: 30 mm | Stroke rate (max.): 155 /min | Stroke min.: 5 mm | Stroke max.: 60 mm | Shut height (stroke down, adjustment up), bdc: 280 mm | Throat (c-frame): 180 mm | Tota...

2000 PRESSIX 100 CNR 4

• Manufacturer: Pressix

Located in Barcelona - Spain 2 identical units available

2002 Elba SA-9013 HS

• Manufacturer: Elba
• Model: SA

Elba SA-9013 HS year 2002 other types possible – to be confirmed) PLC control system Print mark registration with photocell for printed Film Servo-driven pull rollers and sealing bar Gusset Station – 4 lanes Cut-...

LOVO Cell Processing System

Fresenius Kabi Lovo Automated Cell Processing System ®. Automated cell processing system. The easy-to-use, flexible, filtered way to wash and reduce the volume of cell products. The device is in very good, fully ...

Best Brands sheet metal machines in Switzerland

• Manufacturer: Best Brands

see Attach. at the bottom - Beyeler/Bystronic - COLGAR - Finn-/Prima-Power - Gasparini - LVD - Salvagnini - Schiavi - Trumpf ..... Floreani & Partners +39 393 577 2205 Alex/mob. alex.groupmarketing@gmail.com

1992 SEUTHE RS 60 RD (HF300)

• Manufacturer: SEUTHE

system consisting of: - large coil reel - Bandschweisseinrichtung - optional: horizontal band loop - side planer - forming unit - HF welding unit - units for outside scarfing, inside scarfing - each without imped...

2023 O'Hara LCM10 Drum coater

• Manufacturer: O’Hara
• Model: LCM10

Coater for coating or refining tablets, capsules, etc. using drum coating. Incl. various accessories Capacity: 1.5 - 10kg @ 0.8kg/l PLC: Siemens SIMATIC ET200SP

1992 Fryma VME 400 Cream mixer

• Manufacturer: Fryma
• Model: VME-400

The Fryma machine is suitable for powdered and liquid raw product using heat, pressure and mechanical stirring energy to produce homogeneous products for the chemical, pharmaceutical, cosmetic or food industry. T...