Building Filters
- Trusted Seller
1980 HILU SSP 140W
- Manufacturer: HILU
The machine is being sold by us on behalf of a customer. Unfortunately, a video is not available. The machine has been with the seller for over 15 years and has not been in operation since then. An inspection un...
Niederhelfenschwil, Switzerland - Trusted Seller
1990 HYDRAP HKP 12
- Manufacturer: HYDRAP
Hour counter: 30'181 h last safety check: 27.07.2023, overrun time 38 ms, overrun distance 60 mm
Niederhelfenschwil, Switzerland - Trusted Seller
1990 LAUFFER EPT 100
- Manufacturer: LAUFFER
Equipment: - Cutting impact dampening - Hydraulic die cushion and ejector - CNC - gripper feed (200x900x1700) - Soprem belt system (optional) see article no. 3-49541
Niederhelfenschwil, Switzerland - Trusted Seller
2003 SCHULER GRÄBENER GMO 2-315-2000-160
- Manufacturer: Schuler
Coil Reel KOHLER 4000.1 Straightener KOHLER KRM 50.400/9 KOHLER Loop control BÜ5 Roll feed KOHLER WVE 120/400 HIESSL belt lubrication (wide spray) UNIDOR control system Tool loading consoles
Niederhelfenschwil, Switzerland - Trusted Seller
1999 LOIRE SAFE EDIM 350-150/16-14/14-12
- Manufacturer: Loire Safe
Object: 41754 | Controls: SIEMENS S5 95U | Drive system: hydraulic | Openings in uprights: yes | Total force (nominal): 350 to | Table surface (left-right): 1600 mm | Table surface (front-back): 1400 mm | Str...
Niederhelfenschwil, Switzerland - Trusted Seller
2003 LOIRE SAFE EDIMR 800
- Manufacturer: Loire Safe
Complete hot forming line (sheet metal application)consisting of: * Hydraulic press LOIRE SAFE 800 to. * Schwartz GA1534 furnace system: - max. lining width: 1.500 mm - Inner furnace length: 20.000 mm - Inner hei...
Niederhelfenschwil, Switzerland - Trusted Seller
2001 LASCO TZP 1000 SO
- Manufacturer: Lasco
Complete hot forming line (sheet metal applications) consisting of: * 1000 to. hydraulic press LASCO * Schwartz furnace system: - max. lining width: 1700 mm - Furnace length: 27060 mm * Strothmann feeder * ABB lo...
Niederhelfenschwil, Switzerland - Trusted Seller
SCHULER PDR 250-500
- Manufacturer: Schuler
- Model: PDR 250-500
Object: 43587 | Last overhaul: 2002 | Drive system: eccentric / crank | Frame design: C-frame, single sided | Opening in table: yes | Total force (nominal): 250 to | Table surface (left-right): 800 mm | Table ...
Niederhelfenschwil, Switzerland - Trusted Seller
1980 BETZ EZL 300
- Manufacturer: BETZ
approved for single stroke Safety valve make Herion Pneumatic clutch make Desch Motor grease - central lubrication ram weight - compensation cylinder Motorized height adjustment T-slots in the ram Freestanding co...
Niederhelfenschwil, Switzerland - Trusted Seller
1978 PLATARG 312
- Manufacturer: PLATARG
Standard flat plate lifters Pneumatic feeder Machine still in production - video available
Niederhelfenschwil, Switzerland - Trusted Seller
2023 FEINTOOL FB ONE 11000
- Manufacturer: FEINTOOL
Absolutely mint condition: just 3'300 running hours, 700'000 strokes Special equipment fineblanking press: + block hydraulics for 4th and 5th force. High pressure 30-270 bar. + mechanical reamers (without tool-bo...
Niederhelfenschwil, Switzerland - Trusted Seller
2025 PLATARG 312 HS
- Manufacturer: PLATARG
Object: 48610 | Controls: BECKHOFF | Number of slide actions: 13 | Slide force: 3 to | Stroke: 60 mm | Stroke rate (max.): 210 /min | Slide adjustment: 6 mm | Variable speed: yes | Stroke rate (min.): 70 /m...
Niederhelfenschwil, Switzerland - Trusted Seller
1968 PLATARG 912
- Manufacturer: PLATARG
Platarg 912 ICOP Transfer Press 6.5" Stroke - 3.15" Max Part Length * Strip and Release on the Stripper Forks * 11 Stripper forks included * Full Set of Bottom Cams with Kick up lever style * Oil Cup Lube on Top ...
Niederhelfenschwil, Switzerland - Trusted Seller
1999 SCHMID HSR500
- Manufacturer: Schmid
Press is equipped with 4. force Straightener SCHMID Loop control GSW SCHWALBE new in 2016
Niederhelfenschwil, Switzerland - Trusted Seller
1971 PLATARG 611
- Manufacturer: PLATARG
Platarg transfer press 611 Specifications: Number of stations: 12 (11+1) Capacity per ram: 6 tons Maximum stroke: 114 mm Max. shell height: 50 mm Standard ram pitch: 82 mm Blank diameter: 80 mm
Niederhelfenschwil, Switzerland