Used processing in Shanxi, China

Centrifuge

TLL-A series vertical scraper discharge centrifuge works according to the principle of centrifugal filtration. The wet coal passes through the inlet and enters the space between the screen basket and the spiral s...

Flotation Machine

XIM-S Series Mechanical Agitation Flotation Machine is an improved self-priming air mechanical agitation flotation machine, which is suitable for flotation of 0-0.2mm particle size coal slurry. XIM-S Series Mecha...

Middlings/Gangue Dewatering Elevator

The dewatering bucket elevator is suitable for lifting washed middlings and gangue from the lower part of jigger in coal preparation plant, and the lifted material can dewater itself in the lifting process. ►The ...

Scraper Motor

XGZ Series Scraper Conveyor is mainly used for the transportation and distribution of coal of different moisture and varieties in the production system inside and outside the coal processing plant and in the coal...

T/L Series Hoister

It is widely used for the pre-dewatering of gangue or middlings excluded by jigger in coal processing plant, and also used for vertical conveying of coal materials such as cement, stone, sand, clay, ore, etc. Hoi...

Rolling type Plate Leveler

Limit of yielding：700 Mpa Max. thickness：40 mm Max. width：2000 mm Equipment parameter Model：W43T-40×2000A Limit of yielding：700 Mpa Max. thickness：40 mm Max. width：2000 mm Boundary dimension：8190×4710×6720 mm Mot...

Big size composite material press (side fascia,wall board,honeycomb board)

160T automatic feeding and unloading unit (front and rear belt conveyor)

1、Belt conveyor BZY1113/24/850 (1)Belt conveying length: 2400mm (2)Belt conveying breadth: 1300mm 2、Electric inlet and outlet hot press (with dust sweeping device)Hot press BY624 x 8/16 (5)No.&diameter of main oi...

Anti-tilt, square feeding

.of valid working width: 4.1 kgf/cm². Name: 160 tons hot press | Model model: BY214X10-16(3) HRC | Nominal total pressure: 1600kN | Working layers: 3 | Platen no& size: 4-3200 x 1300 x 42mm | Hot platen spacing o...

BY214X8-20(8)H2C

.of valid working width: 5.4kgf/cm². Name: 200 tons hot press | Model model: BY214X8-20(8)H2C | Nominal total pressure: 2000kN | Working layers: 8 | Platen no& size: 8-2700 x 1370 x 42mm 1-2700 x 1370 x 52mm | Ho...

BY214X8-35(3)H1RC

.of valid working width: 9.5kgf/cm². Name: 350 tons hot press | Model model: BY214X8-35(3)H1RC | Nominal total pressure: 3500kN | Working layers: 3 | Platen no& size: 4-2700 x 1370 x 42mm | Hot platen spacing ope...

Wooden structure beam press

CLT wooden house panel press

With independent heating furnace

.of valid working width: 3.7kgf/cm². Name: 120 tons hot press | Model model: BY214X8-12(5)HRC | Nominal total pressure: 1200kN | Working layers: 5 | Platen no& size: 6-2500 x 1300 x 42mm | Hot platen spacing open...

1650×3mm Slitting line

Machine list Technical performance and parameter No. Machine item Qty Unit 1 Hydraulic coil trolley 1 set 2 Hydraulic decoiler 1 set 3 Pinch roll 1 set 4 Hydraulic transition bridge (Front accumulator) 1 set ...