Used processing in Minnesota, USA

Rotating Assembly for Beloit Jones Shark Horizontal Pulper

• Manufacturer: Beloit

Beloit Jones Shark Horizontal Pulper Rotating Assembly

Hymac model 2T Pulper Drive for Turboflex Belt Drive Pulper Application

• Manufacturer: Hymac

Hymac 2t Pulper Drive For Turboflex Belt Drive Pulper Application, Unused Since Rebuild, 4 3/8″ Diameter At Drive End, Tapered Output Shaft, Was Installed On 14 Ft Hymac Turboflex 60 Hc Batch Pulper

GL & V Tri-Phase Mixer, Titanium Material

• Manufacturer: GL&V

Designed for mixing chloride dioxide and hydrogen peroxide into pulp at 4%-14% OD Consistency. Capacity at 4% is 500 ADMt/d; Capacity at 14% is 900 ADMt/d GL & V Tri-Phase Mixer Titanium Material. New Spare rota...

Dorr-Oliver Double Bank DSM Screen

• Manufacturer: Dorr-Oliver
• Model: DSM

Double Bank Dsm Screen, 48″ Width, 0.004″ Slots, Stainless Steel, With Uniheader, With Controls

Dorr-Oliver Double Bank DSM Screen

• Manufacturer: Dorr-Oliver
• Model: DSM

Double Bank Dsm Screen, 48″ Width, 0.004″ Slots, Stainless Steel, With Uniheader, With Controls

Dorr-Oliver Double Bank DSM Screen

• Manufacturer: Dorr-Oliver
• Model: DSM

Double Bank Dsm Screen, 48″ Width, 0.008″ Slots, Stainless Steel, With Uniheader, With Controls

AFT Glatiator Rotor for Bird 400 Centrisorter Pressure Screen

Material 316ss Contact us for more info. manufacture The AFT Gladiator™ rotor has been designed to maximize the potential of a screen system. It is engineered to improve capacity and efficiency, reduce power requ...

Beloit DD3000 size 34″ Rotor Refiner, stainless lined

• Manufacturer: Beloit
• Model: DD3000

Power Range (HP); 350-800 Size: 34 inch | Inlet: 6 inch | Outlet: 6 inch | Nominal capacity: 65-400 t/d | Speed range (rpm): 514-720 | Max. stock pressure (psig): 100 | Shipping weight: 13500 lbs

Beloit model 3396 Shark Pulper Rotor 6 vane 43″ Diameter

• Manufacturer: Beloit

Beloit Model 3396 Shark Pulper Rotor, Stainless Steel 6-Vane Rotor, 43" Diameter, Casting # D54, Cb7cu manufacture Beloit Model 3396 Shark Pulper Rotor, Stainless Steel 6-Vane Rotor, 43″ Diameter, Casting # D54, ...

Beloit Pulper Drive model 350V , Ratio 3:5 Type RAV ; Remanufactured

• Manufacturer: Beloit

Ratio: 3:5 Remanufactured  beloit 350v pulper drive; ratio 3: 5; type RAV; S/N BC808, rebuilt in 2012

Beloit GL&V Pulper Drive model 350V

• Manufacturer: Beloit

Beloit Model 350v Shark Pulper Drive, With Stainless Steel Extraction Plate, With Stainless Steel 6-Vane Rotor, 44″ Diameter Rotor, 48″ Diameter Extraction Plate, 1″ Diameter Holes, With Extraction Chamber, Ratio...

GL&V Impco Hi-Shear Mixer, Stainless

• Manufacturer: Impco

Contact us for more info! Impco High Shear Mixer, stainless material

Lab-Line Instruments Orbit Shaker model 3520SPEC, 100 Watts

• Manufacturer: Thermo Fisher Scientific

Lab-Line Instruments Orbit Shaker model 3520SPEC, 50/60 Hz, 100 Watts, 120V, 0.9 Amps

International Equipment Company – IEC – model K Centrifuge, 3/4 hp

• Manufacturer: IEC

The IEC model K floor model centrifuge is a heavy duty, large capacity machine designed for high speed with constant or intermittent use. The IEC model K is a G-testing machine designed for use by the electronic ...

Sprout Bauer Screw Press Model 575-18-3

• Manufacturer: Sprout Bauer

Model 575-18-3 Dewatering Presses Main Drive 100 hp, 965 rpm 316 stainless steel construction Total weight 13,500 lbs Compression Screw weight 3450 lbs. Consistency 3-3.5% inlet, 35% outlet Design @ approx. 100 s...