Used processing in Opole, Poland

Ash conveyor, waste removal from the Ż 35 furnace

Length 2.90 m, total 3.50 m Screw diameter 190 mm Outer diameter 210 mm Motor with geared motor 0.75 kW

Conveyor belt, driven, in bevel TA 259

Length 8.00 m Width of the tape 50 cm Total width 90 cm Belt conveyor in a slant, rising to about 3.00 m

Furnace, sawdust boiler with a stoker

Furnace with heating power of 600 KW Low-temperature furnace, automatic system for burning biomass Type INNOVEX - BOREX - AT Date of production 2006 Technical and operation documentation Nolting scraper The whole...

Tank for compressor 750 l

Tank with a capacity of 750 l Pressure 10 bar - height 170 cm - diameter 80 cm

Tank for compressor 500 l

Tank with a capacity of 500 l Pressure 16 bar Year 2002 - height 200 cm - diameter 60 cm

Mahle screw compressor, 22 KW motor 15

• Manufacturer: Mahle

TYPE MSK D 22 Pressure 10 bar Motor 22 KW Number of hours 06772 Year 1995 - length 1,70 m - width 100 cm - height 1,00 m

Bevel belt conveyors for sawdust, woodchips, grain, silage, etc.

1. conveyor belt with bevel mobile on wheels Horizontal length 6.00 m Bevel length 2.00 m Internal width 1.00 m Total width 1.50 m + 40 cm wheels Discharge of the horizontal part at a height of 1.10 m Year 2009 W...

Froling 500 KW 25 furnace

500 kW heating furnace TURBO MAT 500 TYPE Fuel-burning furnace for biomass, bark, wood chips, and sawdust Built in 2007 Movable grates 8.5 m long, 200 mm diameter fuel screw Very good technical condition More pho...

Atlas Copco compressor air dryer

• Manufacturer: Atlas-Copco

TYPE FD 450 Pressure up to 14.5 bar Year of production 1999 Width 130 cm Depth 94 cm Weight 315 kg Height 113 cm Motor 5,1 KW

Atlas Copco Compressor GA 37 12, 12A

• Manufacturer: Atlas-Copco
• Model: GA 37

TYPE GA 37 Pressure 8 bar 37 KW motor Year 1999

Roller table, driven, with pneumatic locks PR 257

Table length 6.90 m Roll length 130 cm Diameter of the roll 80 mm Height 85 cm Distance between rollers in the axis of rollers 20 cm

Vibrating trough, vibrorn 17

Length 8.30 m Trough width 65 cm Total width 80 cm Gutter height 20 cm Total height 80 cm Sieve size 65 x 60 cm, fraction 40 x 40 mm Motor approx. 5 KW

Conveyor belt, conveyor belt TA 260

Horizontal length: 3.50 m, diagonal length: 2.50 m Belt width: 60 cm Discharge height: 180 cm

Insulated chimney made of stainless steel, acid-resistant, 7.50 m

Length 7.50 m Outer diameter 370 mm Inner diameter 250 mm

Plate chain, transport

pitch 200 mm ( from pin axis to pin axis ) thickness of insert 10 mm width between inserts inner 45 mm width between inserts outer 65 mm height of plate 60 mm We have about 80 mb