Used processing in Indiana, USA

Schutte Two (2) 13100 Hammermills

• Manufacturer: Schutte

The Schutte Two (2) 13100 Hammermills offer robust performance with their 200 HP capacity, making them suitable for processing materials such as wood, paper, cardboard, shingles, and insulation. Each unit feature...

2005 Arun Enterprises Model 24 Test

• Manufacturer: Arun Enterprises

This 2005 Arun Enterprises Model 24 Test Granulator is a reliable used machine, perfect for testing product materials. It comes equipped with a 15 HP motor and operates on 380 V, providing efficient granulation c...

2014 MG Recycling 380VZT Wire Granulation System

• Manufacturer: MG Recycling

The 2014 MG Recycling 380VZT Wire Granulation System is a reliable choice for processing wire efficiently, with a capacity of approximately 2000 lbs/hr. This used system has logged 7,780 operational hours but rem...

Rapid Three (3) 10HP Granulators

• Manufacturer: Rapid

This listing features three used Rapid 10 HP Granulators designed for efficient material processing. Each unit has an opening size of 18 inches by 10.5 inches, making it suitable for handling various recycling an...

2014 Javelin Eddy Current 60" Infeed

• Manufacturer: Javelin

The 2014 Javelin Eddy Current 60" Infeed conveyor is a reliable piece of recycling and trash handling equipment. Built to endure rigorous operations, this used conveyor is ideal for facilities focused on efficien...

1999 MILNOR 110LB EXTRACTOR

• Manufacturer: Milnor

New front and rear bearing assembly kits installed in January 2024 by Milnor technicians. Machine was paired with Milnor CBW 110lb capacity.

BECKART ENVIRONMENTAL BATCH FILTER PRESS WASTEWATER TREATMENT SYSTEM

• Manufacturer: Beckart

REMOVAL DISCLAIMER: PLEASE NOTE THAT LINE ITEMS 1.3 AND 1.8 ARE LOCATED AT ANOTHER FACILITY, ~20 MINUTES FROM THE MAIN WAREHOUSE. PLEASE SEE ATTACHED DOCUMENT FOR FULL INVENTORY LIST. PHOTOS AND INVENTORY LIST ...

Parshall Flume

3 inch Parshall Flume flow measurement device. Can handle flow rates from 12.5 gpm up to 835 gpm with an accuracy of +/- 2-5%. The Parshall Flume is an economical and accurate way of measuring water flow in open ...

2014 McLanahan .

• Manufacturer: McLanahan

Qty available: 4 | Capacity: 2,362 Sq Ft | Width/dia: 9 Feet | Length: 70.2 Feet | Height: 14 Feet | Weight: 140 Tons short | Pressure: 200 psig

2015 Siebtechnik SBD 400K

• Manufacturer: Siebtechnik

Siebtechnik short bowl decanter (SBD) model SBD 400K, serial 6790. Speed 2800 rpm. Drive motor approx 20 HP.The SHORTBOWL decanter with cantilever design is the optimal solution for hot applications and high clea...

1999 MILNOR CLASSIC

• Manufacturer: Milnor

8 module, 110lb capacity CBW was used for washing industrial gloves. Machine is in good condition for its age and has been well maintained. It was loaded by a Milnor Conwa and used a centrifugal extractor (both a...

2006 Atlas Copco BD-520

• Manufacturer: Atlas-Copco
• Model: BD

Atlas Copco heated regenerative desiccant compressed air dryer rated for 150 psig and a pressure dew point of -40C/-40F. Twin towers. Skid mounted. Air flow approx 1100 cfm. ASME Nat'l Bd # 13082 MAWP 159.5 psi ...

2013 ENERGENICS S20 STAINLESS STEEL LINT FILTER

• Manufacturer: ENERGENICS

Stainless steel lint filter. Ready to ship. Electrical requirements: 120 volt

Unknown Manufacturer: Used 7' Width x 19' Length Infeed

• Manufacturer: Unknown Manufacturer: Used

This used infeed conveyor is designed for efficient material handling in recycling and trash processing applications, serving as a dependable baler feeder. It features a 7-foot width and a 19-foot length, providi...

Conair B1504VLF411D

• Manufacturer: Conair

The Conair B1504VLF411D is a robust used granulator equipped with a 150 HP motor, ideal for recycling and trash equipment operations. Its opening size of 28" x 22" allows efficient processing, paired with a 3/8" ...