Used processing in Germany

997 Liter IBC Container, Aisi 304

remarks: Frame, Fe (galvanized); Some containers with small dents; 1 container with overpressure damage (see photos)

1000 Liter Container, Aisi 316

• Manufacturer: BSI Biemont Soneco Industries

remarks: Durchmesser Mannloch ca. 385 mm; 2 stärkere Beulen im Übergang des Zylinders zu den Böden; leichter Korrosionsansatz im Inneren des Containers

1000 liter IBC round container, Aisi 316

• Manufacturer: eurocont

remarks: Slight differences in design; 1 container with 2 welded struts in the manhole (see photos)

1000 Liter Container, Aisi 304

remarks: Frame, Fe (galvanized); diameter of manhole approx. 415 mm (for 2 containers, the fastening screws of the manhole cover are made of Fe (galvanized; with signs of corrosion)

1000 Liter Container, Aisi 316

remarks: Frame, Fe (galvanized); diameter of manhole approx. 415 mm (container with screwed screw holder made of Fe (galvanized) around the manhole collar); fastening screws of the manhole cover incomplete; dents...

1000 Liter Container, Aisi 304

• Manufacturer: Gempp & Unold AG

remarks: Frame, Fe (galvanized); Diameter manhole approx. 415 mm

1000 Liter IBC Container, Aisi 304

• Manufacturer: Gempp & Unold AG

remarks: Frame, Fe (galvanized); diameter of manhole approx. 415 mm (screws for fastening the manhole cover made of Fe (galvanized))

1000 Liter Container, Aisi 316

• Manufacturer: Stöcklin

remarks: Frame, Fe (galvanized); diameter of manhole approx. 420 m; slight differences in design (e.g. manhole cover); in 1 container the upper bottom is slightly pressed in, the other container has a dent in the...

1050 Liter Container, Aisi 304

• Manufacturer: Thyssen Umformtechnik (UCON)

remarks: Container bolted to a drive-under frame made of Fe (galvanized); butterfly valve very stiff (possibly defective); stacking support at the top partially slightly bent; container with small dents

1000 Liter IBC Container, Aisi 316

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: Frame, Fe (galvanized; partially bent and with signs of corrosion); slight differences in design possible; type plates may be missing in some cases

1000 liter IBC container, Aisi 304

remarks: Frame, Fe (galvanized; partly slightly bent); slight differences in design possible; Ball valve made of brass (nickel-plated); Diameter manhole approx. 420 mm (for 1 container the manhole is slightly pre...

1000 Liter IBC Container, Aisi 304

• Manufacturer: Thyssen Umformtechnik (UCON)

Volume: 1.000 liter | Stand type: cage | Total height: 1.650 mm | Total width: 1.230 mm | Total length: 1.030 mm | Manhole: in the upper bottom (Ø 400) | Technical equipment: ball valve | Outlet: DN50 DIN 11851 ...

1000 Liter IBC Container, Aisi 304

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: Frame, Fe (galvanized); 1 additional manhole cover with built-in Liquifant; small dents in the upper bottom (see photos)

445 liter IBC Container, Aisi 316

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: Frame, Fe (galvanized; slight corrosion); Manhole diameter approx. 395 mm (manhole cover fastening screws not completely complete)

1050 liter IBC container, Aisi 316

• Manufacturer: Waldner

remarks: Frame, Fe (galvanized); one of the containers is slightly higher (approx. 1,800 mm) due to a pipe in the manhole cover; this container also has 1 dip tube inside (see photos)