Used processing

PTI WATER RING PELLETIZING LINE 18007

One (1) used 1999 PTI pelletizing line with model TS4500 4.5″ 30:1 L/D extruder having an electrically heated, water cooled (closed loop), and side vented barrel at a nominal 42″ center-line height. The gearbox i...

CUMBERLAND 1456i GRANULATOR 17955

• Manufacturer: Cumberland

Cumberland model 1456i granulator. S/N 84000-88011. 14″ x 56″ feed throat. 3 knife twin shear rotor. 2 bed knife. 100 HP 208-230/460-volt 1780 RPM motor. 8″ OD airveyor discharge. Mounted to a plate base with vib...

BALL & JEWEL BP27 GRANULATOR 14157

• Manufacturer: Ball & Jewell

Ball & Jewel model BP27 granulator. S/N 99K03252. 12″ x 15″ feed throat, 3 knife solid rotor, 2 bed knife 20 HP 230/460-volt motor. Double wall tray / robot feed hopper bin discharge. Mounted on casters, complete...

CUMBERLAND 184 GRANULATOR 17773

• Manufacturer: Cumberland

Cumberland model 184 granulator, S/N 239150-86501, 8″ x 10″ feed throat, 3 knife open rotor, 2 bed knife, 7.5 HP 230/460-volt motor – wired 480-volts, insulated tray feed hopper and body panels, “homemade” bin di...

PALLMAN PS6-6 RUBBER GRANULATOR 17877

• Manufacturer: Pallmann

Pallman “Ultra-Granulator model PS6-6, S/N 184.90.022, 22″ x 24.5″ feed throat (560mm x 630mm), 3 knife guillotine style rotor, 2 bed knife, 115 HP (86 Kw) 1780 RPM 440-volt motor with a 140 maximum amp load, rat...

CUMBERLAND 1837B GRANULATOR 17832

• Manufacturer: Cumberland

Cumberland model 1837B granulator, S/N 50510-84013, 18″ x 37″ feed throat, 5 knife steep angle rotor, 2 bed knife, 100 HP 460-volt 1775 RPM motor, conveyor in-feed hopper, 8″ OD airveyor discharge, mounted on a l...

CUMBERLAND S-200 SCREENLESS GRANULATOR 17800

• Manufacturer: Cumberland

Cumberland model S-200 screen less granulator, S/N 00862, 11″ x 11″ cutting chamber, two “S” cutters, 2 HP 230-volt 1740 RPM motor – wired 240-volts, robot / top hand feed hopper, gravity discharge, on casters, c...

NELMOR V68 GRANULATOR 17761

• Manufacturer: Nelmor

Nelmor model V68 granulator, S/N 00E03872, 6″ x 8″ feed throat, 3 knife open rotor, 1 bed knife, 5 HP 230/460-volt 1745 RPM motor, insulated tray feed hopper, 2″ OD left hand airveyor discharge, 1/4″ holes screen...

CUMBERLAND 1828B GRANULATOR 17620

• Manufacturer: Cumberland

Cumberland model 1828B granulator, No S/N, 18″ x 28″ feed throat, 3 knife steep angle rotor, 2 bed knife, 100 HP 230/460-volt 1785 RPM motor, tray feed hopper, 8″ OD airveyor discharge, mounted to a plate base, s...

GRANUTEC TFG810-10 FEED ROLL GRANULATOR 17391

Granutec model TFG810-10 granulator, S/N 0109.4765, 8″ x 10″ feed throat, 3 knife rotor, 2 bed knife, 10 HP 460-volt motor, rear 10″ wide smooth steel feed roll in-feed powered by a 1/2 HP 90-volt D/C motor and v...

NELMOR RG1215M1 GRANULATOR 17473

• Manufacturer: Nelmor

Nelmor model RG1215M1 granulator, S/N 7807-11055, 12″ x 15″ feed throat, 3 knife solid rotor, 2 bed knife, 20 HP 230/460-volt motor, insulated tray feed hopper and body panels, hydraulic jack back assisted hopper...

CUMBERLAND 284 GRANULATOR WITH FEED 17466

• Manufacturer: Cumberland

Cumberland model 284 granulator, S/N 525525-84012, 10″ x 12″ feed throat, 3 knife open slant cut rotor, 2 bed knife, 7.5 HP 460-volt motor, insulated tray feed hopper with rear facing 8″ wide knurled steel and in...

NELMOR G1220P1 GRANULATOR 6101

• Manufacturer: Nelmor

Nelmor model G1220P1 granulator. S/N 9304-32543. 12″ x 20″ feed throat, 2 micro knife rotor, 2 bed knife, 15 HP 230/460-Volt motor. Single wall tray feed hopper. Mounted on casters, complete with starter and cont...

CUMBERLAND 6″ PELLETIZER 17387

• Manufacturer: Cumberland

Cumberland Utilizer 6″ strand pelletizer. Machine has a 36 knife helical style rotor and a 5HP 180-Volt DC motor with silicon controlled rectifier control. Mounted on casters, S/N 30500-88004. Manufactured 1988. ...

CUMBERLAND 484 GRANULATOR WITH HARD 17373

• Manufacturer: Cumberland

Cumberland model 484 granulator, S/N 421000-94010, 14″ x 16″ feed throat, 3 knife open slant cut rotor with hard facing, 2 bed knife, hard faced cutting chamber, insulated tray feed hopper and body panels, 15 HP ...