Used processing in Wallonia, Belgium

Noback mixer ISS / Omega, ± 3 t/h

• Manufacturer: Omega

Without pump, with equipment cabinet, pivoting and adjustable sand slider

Overband magnet 1,7 kW

Brand: SIME-LENOIR, type: OVE XV, serial number: 90695

Shake-out grid 1800 mm x 1800 mm

With vibrating axle, drive over 3 belts, on 12 springs, with increase on 3 sides

Sandfeeder KLEIN, 200 l

Year of construction:1 972, weight: ±250 kg 3 sand inputs, Ø 150 mm 1 sand output , Ø 70 mm With one level sensor With pressure regulator

Jolt-squeeze moulding machine ZIMMERMANN GO/2B

• Manufacturer: Zimmermann

This machine shakes under pressure Number: 134150 | Press pressure: 3000 kg | Payload: max. 120 kg | Weidth max. moulding boxes: 450 mm | Table size: 570 mm x 430 mm | Press stroke: 90 mm | Lifting stroke: max. 1...

Small bunker with 2 compartments 2 x 2,7 m³

1st screw CEM type MEUB90S4, 1,1 Kw, 220/380 V, 1410 rpm 2nd motor for screw CEM type MEUB90L8, 0,55 Kw, 220/380 V Driven by belt with one screw for each compartment Ø input 30mm (2x) Ø output 1x 200mm

Tansport chut LOCKER 4000 x 800 /440mm

Type: LDDC, serial number: DDC0493 Year of construction: 1999, weight : 1000 kg 2 Vibrating motors INVICTA, Type BK40-2716, 1,3 Kw, 960 rpm, 415 V Height of the input 200mm, the entrance is from behind Height of...

Bunker with discharging conveyor ± 4,4 m³

Gear motor + brake SEW, type KA87TDVI32S4BMO/HF, 5,5 kW, 230/400 V, 1430 rpm, exit: 46 rpm 2 drums Ø 320mm Bunker equipped with PVC in the inside Rollings with rubber Bunker with frame and discharging conveyor Wi...

1995 Pneumatic dust conveyor BOGGI+LEGNANI 50 l

• Manufacturer: Legnani

Serial number: 74057, construction year: 1995, weight: ± 100 kg Ø 470mm Operating pressure 8 bar With one pneumatic clap Input sand Ø 150mm Temperature 200°C Capacity 50 l Is adapted to silo S3104 of 19m³ Appropr...

Discharging belt EA 4500 mm x 990 mm

Gear motor BAUER, D2A47H/309K, serial number F11478; 4 kW, 5,5 hp; 220/380 V, 1420/31,5 rpm Driven by chain, Ø rolls 130 mm With cable for stopping the sides

Vibrating convayor AEG 7600 x 630 mm, 60 t/h

Type: OA7585/630063, serial number: B40089 With 2 vibrating motors AEG type 063 X-K, 5,13 KW, 1460 rpm, serial number 3054003-3054004, stroke 4,5 mm With cover to pose on the 4 rubber elements With round antiwear...

1991 Vibrating chut KSK- F, 2800 mm x 850 mm

Type: F, serial number: 91023 2 motors FRIEDRICH, type R 700-6, serial number 8209.219, 3 kW, 220/380 V, 50 Hz, 12,6/7,3 A, 980 rpm With cover

Shake-out conveyer 1700 x 670 mm

Motor HEMAF, 4 hp, 380/660 V, 2820 rpm Stich 125 x 65 mm, on 4 springs In good condition

1962 Double grinder, foundry, Ø 600 mm, continuous

• Manufacturer: BAUTENBERG

Type: SS6/45/25, serial number: 1653 Motor HELIN, type DKH 15- 4; 2 x 5,5 kW; 1430 rpm; 380/660 V Continuous speed with 2 motors and 4-step pulley

Core mixer VOGEL&SCHEMMANN, Mischka 3GF, max. 400 kg

• Manufacturer: Vogel

Mixer with oilbath gearbox, charges 250 to 400 kg, output (manual filling) ±4000kg/h; (automatic filling) ±4800kg/h