Used processing

Pressure Leaf (Funda) Filter Stainless Steel 304 Chemap A10 - IPP# 89349

• Manufacturer: Chemap

Funda filter with centrifugal discharge Shell 900mm diameter x 960mm from flanged top to bottom discharge (22) 800mm diameter filter elements @ 30mm spacing Requires 15 PS motor Wet cake discharge

Pressure Leaf Filter 5 m² (54 ft²) Stainless Steel 316 - IPP# 98476

• Manufacturer: Mannedorf (Zurich)

304SS jkt on sidewalls Dry cake discharge Filter tank measures 750mm dia x 1035mm str side, bolt dish top, cone btm 440mm long w/304SS dia btm discharge opening Vert tank W/packing gland on shaft horiz leaf design

Pressure Leaf Filter 6 m² (65 ft²) Stainless Steel 316 - IPP# 94604

• Manufacturer: Artisan

continuous filter/washer Filtration resistance due to cake build-up on stationary filter plates is limited to specific controlled thickness by the wiping action of the blades attached to rotating discs in each st...

Stainless Steel 316 Chemap Ag (Switzerland) R-5 Pressure Leaf Filter - IPP# 82224

• Manufacturer: International Process Plants

Funda pressure leaf filter W/centrifugal dry cake discahrge Shell 508mm dia x 150mm l

Pressure Leaf Filter 5.5 m² (59.2 ft²) Glasslined - IPP# 89418

• Manufacturer: BHS

Shell manufactured by BHS, Serial 329063 Glass #8000. with 7-internal filter plate. full vacuum (810 liter) Feed has 2-50mm w/(2) vibratory feeders Top has additional 4-100mm nozzles Bottom discharge is 500mm

Pressure Leaf Filter 4.6 m² (50 ft²) Hastelloy - C22 - IPP# 203742

• Manufacturer: Dr. Mueller

Fundabac Filter 970 liter capacity, jacket is 170 liters

Pressure Leaf Filter Stainless Steel 304 - IPP# 204104

70 ltr pressure filter Centrifugal discharge packing gland on shaft Motor: 220/480 V

Pressure Leaf Filter 4.6 m² (49.5 ft²) Stainless Steel 304 - IPP# 94385

• Manufacturer: R Stihler

Filter body manufactured by R Stihler, serial #9018 Filter tank capacity 593 liter. with (2) vibratory motors Motor: 3 phase non-flameproof motors and bottom cone

Pressure Leaf Filter 3.3 m² (35.5 ft²) Stainless Steel 316 - IPP# 71234

• Manufacturer: International Process Plants

21" cone Filter vessel volume 496 liter Each plate 760mm diameter Cake is discharged by means of oscillation with 3.5 KW, 3/50/380 volt motor Filter has (8) horizontal leaves

Pressure Leaf Filter 28.8 m² (310 ft²) Stainless Steel 304 - IPP# 92821

• Manufacturer: International Process Plants

Certified by Votator Corp horizontal plate design thru Falk gearbox, input 1750, ratio 6.246:1, output 290 Shell is 0.375 " thick head is 0.375" thick, head is 0.500" thick

Pressure Leaf Filter 3.3 m² (35.5 ft²) Stainless Steel 316 - IPP# 71235

• Manufacturer: International Process Plants

21" cone Filter vessel volume 496 liter Each plate 760mm diameter Cake is discharged by means of oscillation Filter has (8) horizontal leaves

Pressure Leaf Filter 6.5 m² (70 ft²) Stainless Steel 316 - IPP# 102129

• Manufacturer: Pemco

Pemco Leaves: (2) 12" x 40", (2) 18" x 40", (3) 22" x 40" vertical leaves

Pressure Leaf Filter 10 m² (107.6 ft²) Stainless Steel Austenitic - IPP# 204509

• Manufacturer: Schenk

Capacity: 760 liter Temperature Range: -25/200 deg C driven by hydraulic

Pressure Leaf Filter 18.6 m² (200 ft²) Stainless Steel 316 - IPP# 73814

• Manufacturer: DeLaval

horizontal leaf, vertical tank pressure filter Mech seals on shaft top and btm No drive.

Pressure Leaf Filter 1.05 m² (11.3 ft²) Stainless Steel 304 - IPP# 73419

• Manufacturer: Filter-1

Has (7) 18" dia shallow plates. Has .414 cu ft cake capacity. Has 2" btm outlet w/scavenger plate.