Used Extruders

EGAN 6″ 30:1 L/D 400 18037
- used
- Manufacturer: Egan
One (1) used Egan 6″ 30:1 L/D extruder. S/N 37910. Having an electrically heated, water cooled (closed loop), and vented barrel at an approximate a 42” center line height. Water system is incomplete. Philadelphi...
Elk Grove Village, IL
GLOUCESTER 2522 2.5″ 32:1 L/D 17805
- used
One (1) Used Gloucester model 2522 R2 2.5″ 32:1 L/D extruder with an electrically heated, water cooled (closed loop) vented and plugged barrel at approximately a 72″ center line height. Gearbox has a reduction ra...
Elk Grove Village, IL
JOHNSON 1.5″ 8786
- used
- Manufacturer: Johnson
Johnson 1-1/2″ extruder 24:1 L/D, non-vented barrel mounted on base for co-extrusion. 10HP DC motor with no controls. 11.32:1 gear box rating at 41HP with a 1.25 service factor. No barrel cooling. S/N 7621-15
Elk Grove Village, IL
JOHNSON 1.5 8891
- used
- Manufacturer: Johnson
Johnson 1-1/2″ extruder, 24:1 L/D. Non-vented barrel mounted on a base for co-extrusion. 10HP DC motor with no controls. S/N 7619-15. 11.32:1 gear box, 41 HP with a 1.25 service factor. No barrel cooling.
Elk Grove Village, IL
GLOUCESTER 2.5″ 24:1 L/D 60 18350
- used
One (1) Used Gloucester model 25225R2 2.5″ 24:1 extruder having an electrically heated, air cooled, and non-vented barrel at approximately a 65″ center line height. S/N 36736/19. Barrel is set up for Contra-Cool ...
Elk Grove Village, IL
DAVIS STANDARD 75mm 32:1 L/D 18831
- used
- Manufacturer: Davis-Standard
One (1) Used Davis Standard 75mm (2.95″) 32:1 L/D Model DSPW 75IN25 single screw extruder. S/N 72635. SO 80076. Barrel is six (6) zone electrically heated, water cooled(closed loop), and non-vented barrel at a 48...
Elk Grove Village, IL
BRABENDER IT7150 3/4″ & 1″ 19044
- used
- Manufacturer: Brabender
Blades Stock No. 19044 – Brabender model Intelli-Torque IT7150 extruder. Currently installed 24:’ L/D barrel with 3/4″ screw and included spare 30:1 L/D barrel with 1″ screw. 2003 model year. Includes one each 4″...
Elk Grove Village, IL
DAVIS STANDARD 150IN 1.5″ 24:1 17708
- used
- Manufacturer: Davis-Standard
Davis Standard model 150IN DS-20 1.5″ extruder, S/N J6173, 1984 model year, 24:1 L/D vented barrel at a 42″ centerline. Davis Standard 6.53:1 gearbox rated for 50 HP with a service factor of 1.25 for a 152 RPM sc...
Elk Grove Village, IL
A&G EXTRUSION 30MM 3 HP 18677
- used
- Manufacturer: A&G Mercury
One (1) used A & G Extrusion Model CE-30 30mm pedestal extruder. S/N 1380. Having a 20:1 L/D ratio. Unit has an electrically heated and non-vented barrel. Single blower on last zone of the barrel. Benzlers gearbo...
Elk Grove Village, IL
NRM / DAVIS STANDARD 1.5″ 16125
- used
- Manufacturer: Davis-Standard
NRM / Davis Standard 1.5″ Pacemaker IV extruder, S/N 19218, S/O 52660. 24:1 L/D air cooled electrically heated barrel with a 42″ to 44-3/4″ adjustable centerline. Driven by a 10 HP 1750/2300 RPM DC motor with Rel...
Elk Grove Village, IL
KILLION / WAYNE 1″ LAB 18656
- used
One (1) used laboratory sheet line consisting of the following:Killion model KL-100 1″ 24:1 extruder. S/N 12809. Unit has a three (3) zone electrically heated, air cooled, top vented, and plugged barrel at a 42″ ...
Elk Grove Village, IL
BERLYN 2″ 30:1 L/D 40 18399
- used
One (1) Used 2” Berlyn extruder having a 30:1 L/D ratio with a six (6) zone electrically heated, non-vented, both air- and water-cooled barrel at approximately a 42″ center line height. S/N 025D379. Gearbox is a ...
Elk Grove Village, IL
DAVIS STANDARD 3.5″ DOUBLE SPIRAL 12398
- used
- Manufacturer: Davis-Standard
Davis Standard 3.5″ double spiral screw 32:1 L/D, 136″ overall length 12″ shank.Three are available.
Elk Grove Village, IL
DAVIS STANDARD 1.5″ 34:1 L/D 17542
- used
- Manufacturer: Davis-Standard
- Model: Thermatic
one (1) used Davis Standard model Thermatic 150 1.5″ extruder, S/N 62570, 34:1 L/D barrel having a five (5) zone electrically heated, air cooled, and non-vented barrel at approximately a 42? centerline height. Ge...
Elk Grove Village, IL
DAVIS STANDARD 1.5″ 20:1 L/D 17504
- used
- Manufacturer: Davis-Standard
One (1) used 1.5″ 20:1 L/D ratio Davis Standard rubber extruder with powered feed roll on throat. Barrel is electrically heated, water cooled (closed loop) and vented at approximately a 42″ centerline height. Inc...
Elk Grove Village, IL