Used processing

CLOEREN CO-EX BLOCK 14911

Cloeren co-ex block, S/N 97-1766-02, 4-3/4? x 1-1/2″ opening type: secector housing. Manufactured in June of 1997.

VETAPHONE CORONA PLUS CP1 1KW 15083

Vetaphone Corona Plus generator model CP1 1kW. Includes TF415 control and model HP1014C300 static unit, S/N 614600.

DAVIS STANDARD 4.5″ 24:1 L/D 19040

• Manufacturer: Davis-Standard

Davis standard model 45IN45 4.5″ extruder. S/N V3255. 24:1 L/D air cooled and non-vented barrel at a center line of 42″. Driven by a Marathon Blue Max 250 HP 460-volt A/C motor thru 17.49:1 304 HP capacity gearbo...

BRABENDER IT7150 3/4″ & 1″ 19044

• Manufacturer: Brabender

Blades Stock No. 19044 – Brabender model Intelli-Torque IT7150 extruder. Currently installed 24:’ L/D barrel with 3/4″ screw and included spare 30:1 L/D barrel with 1″ screw. 2003 model year. Includes one each 4″...

DAVIS STANDARD 10″ 38:1 L/D 18953

• Manufacturer: Davis-Standard

Used Davis Standard Model 100TH100D 10″ 38:1 L/D extruder. Having a eight (8) zone electrically, heated, water cooled and non-vented barrel at a nominal 44″ center-line. S/N L3201. Shop Order 03643. Gearbox has a...

DAVIS STANDARD 130mm 32:1 L/D 18933

• Manufacturer: Davis-Standard

One (1) used Davis Standard 130 mm (5.1″) model 130IN45HT extruder. S/N 14844. Shop order 70693. Extruder has 32:1 L/D ratio with a seven (7) zone electrically heated, air cooled, and non-vented barrel at a 42″ c...

DAVIS STANDARD 130mm 32:1 L/D 18935

• Manufacturer: Davis-Standard

One (1) used Davis Standard 130mm (5.1″) model 130IN45HT extruder. S/N U7644. Shop order 58491. Extruder has 32:1 L/D ratio with a seven (7) zone electrically heated, air cooled, and non-vented barrel at a 42″ ce...

DAVIS STANDARD 4.5″ 30:1 L/D 18937

• Manufacturer: Davis-Standard

One (1) used Davis Standard model 45IN45 extruder. S/N M3316. Shop order 05432. Extruder has 30:1 L/D ratio with a six (6) zone electrically heated, air cooled, and non-vented barrel at a 42″ center-line. Gearbox...

DAVIS STANDARD 4.5″ 30:1 L/D 18936

• Manufacturer: Davis-Standard

One (1) used Davis Standard model 45IN45 extruder. S/N M3315. Shop order 05432. Extruder has 30:1 L/D ratio with a six (6) zone electrically heated, air cooled, and non-vented barrel at a 42″ center-line. Gearbox...

EDI 59″ SHEET DIE 18873

• Manufacturer: EDI

One used Nordson / Extrusion Dies Inc model Ultraflex R-75 59″ heavy duty sheet die. S/N 73-1362-2-3. Integral upper flexible lip and fixed removable lower lip. Adjusting bolts on 1″ centers. 45-degree restrictor...

EDI / NORDSON 56″ SHEET 18833

• Manufacturer: EDI

One (1) used Nordson/ Extrusion Dies Inc Model Ultraflex HRMC-100 heavy duty sheet die with a 56″ slot opening. Integral upper flexible lip and fixed removable lower lip. Adjusting bolts on 1″ centers. 45-degree ...

WELEX 6″ 36:1 L/D 500 18830

• Manufacturer: Welex

One (1) used Welex model 6.0 36D 6″ 36:1 L/D extruder. S/N 6492. Having an electrically heated, water cooled (closed loop), and vented barrel at an approximate 66″ center line height. Koellman model Unex 8.13 gea...

BATTENFELD / GLOUCESTER 1428HD GRANULATOR 18762

• Manufacturer: Battenfeld
• Model: Gloucester

Used Battenfeld Gloucester Model 1428HD Granulator having a 14” x 28” throat opening. Serial number1428-194. Three knife open rotor with slant cut is belt driven by a 200 HP Motor. Feed hopper modified for convey...

CINCINNATI 80mm TWIN SCREW EXTRUDER 18511

• Manufacturer: Cincinnati

Used Cincinnati model CMT80L-APC 80mm conical counter rotating twin screw plastic extruder. S/N 2040985/010. Screw length approximately 1,665mm long x 80mm diameter at the discharge. Has adapter plate that reduce...

ACTUAL AE-25/10/22 25MM PEDESTAL EXTRUDER 18705

One (1) used Actual model AE-25/10/22 25mm pedestal extruder. Having a 24:1 L/D ratio. Unit has a three (3) zone electrically heated, air cooled, non-vented barrel. Barrel can be raised or lowered and also tilts ...