Used processing

WELEX / MAAG 20 HP 18672

• Manufacturer: Welex

Welex / Maag model 56/56 20 HP melt pump with drive

BATTENFELD CM55 TWIN SCREW EXTRUDER 18510

• Manufacturer: Battenfeld

Used Battenfeld-Cincinnati model CM55 counter rotating twin screw extruder. S/N 2804784/010. Conical screw design. Barrel is electrically heated and air cooled in three zones with air blowers with .20 kw motors. ...

CINCINNATI 112mm TWIN SCREW EXTRUDER 18512

• Manufacturer: Cincinnati

Used Cincinnati model Argos 112P-65-20-1150-UL 112mm parallel counter rotating twin screw plastic extruder. S/N 2041843/010. Screw length approximately 3020mm long x 112mm diameter screw, L/D ratio of 27:1. Barre...

BERINGER 3.5″ SCREEN CHANGER 18671

Beringer 3.5″ hydraulic screen changer with power pack

WELEX 18″ X 41″ 3 18674

• Manufacturer: Welex

Welex model 18X41RHSL 18″ x 41″ 3-roll sheet extrusion stack. S/N 4750. Rolls are silent chain driven by a 5 HP D/C motor and have air actuated nipping pressure with 8.5″ OD cylinders. Has 42″ wide rubber to meta...

MGB SL12 12″ SCREEN CHANGER 17616

21409-11 One (1) used MGB Model SC12 slide plate screen changer having two (2) nominal 12″ diameter breaker plates. Unit is mounted on a stand with casters supplying approximately a 42″ discharge height. Package ...

BERLYN 2″ 30:1 L/D 40 18399

One (1) Used 2” Berlyn extruder having a 30:1 L/D ratio with a six (6) zone electrically heated, non-vented, both air- and water-cooled barrel at approximately a 42″ center line height. S/N 025D379. Gearbox is a ...

EXTEK HSC-35 3.5″ SCREEN CHANGER 18361

One (1) used Extek model EH-35 screen changer having two (2) nominal 3.5″ breaker plates. S/N EH35161. Set up for use on a 3.5″ Gloucester extruder. Cleaned, evaluated, and repaired by Xalloy in 10/2011 and never...

EXTEK HSC-35 3.5″ SCREEN CHANGER 18362

One (1) used Extek model EH-35 screen changer having two (2) nominal 3.5″ breaker plates. S/N EH35160. Set up for use on a 3.5″ Gloucester extruder. Cleaned, evaluated, and repaired by Xalloy in 10/2011 and never...

GLOUCESTER COOLING ROLL STACK 18352

One (1) used Gloucester heavy duty cooling and polishing stand having three (3) 55″ face x 24″ diameter chrome plated rolls mounted in a 45-degree angle arrangement for down stack operation at a 62″ center line h...

CLOEREN / PRODUCTION COMPONENTS 58″ 18338

One (1) used Cloeren / Production Components model Master-flex HD-40 sheet die with a 58″ slot opening. Heavy duty body. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex...

PRODUCTION COMPONENTS 54″ SHEET DIE 18327

One( 1) used Production Components Master Flex HD-40 sheet die with a 54″ slot opening. Heavy duty body. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex adjustment. Coa...

CLOEREN 42.5″ SHEET DIE 18330

One (1) used Cloeren sheet die with a 42.5″ slot opening. Heavy duty body. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex adjustment. Coat-hanger manifold. 3/4″ back c...

CLOEREN 30″ SHEET DIE 18334

One (1) used Cloeren sheet die with a 30″ slot opening. Heavy duty body. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex adjustment. Coat-hanger manifold. 3/4″ back cen...

HARTIG 2.5″ 24:1 L/D 50 18342

One (1) Used 2.5″ Hartig extruder. S/N BE-819. 24:1 L/D four (4) zone electrically heated, air cooled, and non-vented barrel at approximately a 42″ center line height. 3″ round feed entrance. Koellmann gearbox ha...