Used Extruders

Trusted Seller
1994 1994 Berstorff 125 HP 6 Meter x180MM Twin Screw Extruder Reactor
- used
1994 Berstorff N/A 125 HP 6 Meter x 180mm Twin Screw Extruder Reactor Consists of: 30,000 Flender process speed reducer Screws Barrel Die Outlet flange 2 heating zones 2 cooling zones 4 circulation pumps Shaft eq...
$675,000 USD
Tuscaloosa, AL
Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled
- used
- Manufacturer: Davis-Standard
10755162 Used Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled and non-vented barrel at nominal 44" center-line. 15.08:1 Gearbox reduction ratio; Rated at 1...
Belvidere, IL
Pre-Owned PRISM KX-16 R&D Twin-Screw Extruder – 1.25?kW Motor, Full Infrastructure
- used
- Manufacturer: PrismPrism
54037005 Used Thermofischer/PRISM 16 mm Eurolab Twin Screw Extruder. 16mm Diameter screws. 40:1 L/D. Maximum screw speed 500 RPM via a gearbox by a 1.25 kW motor. 7 housing sections. Electrically heated, water co...
Belvidere, IL
Trusted Seller
BRABENDER 88
- used
- Manufacturer: Brabender
Used 25mm 24/1 L/D Brabender twin screw extruder package. Has air cooled extruder, temperature control panel, type D10002, prep center with model 088 type 09-25-000 temperature pressure module. Includes 10 HP DC ...
Hainesport, NJ
Trusted Seller
12' Long
- used
Used stainless steel water bath 24" wide X 10" deep X 12' long. Includes pump.
Hainesport, NJ
Trusted Seller
Conair ST107-16-2
- used
- Manufacturer: Conair
Used Conair Mdl ST107-16-2 stainless steel cooling tank with approximately 12" X 12" cross section. 14' long.
Hainesport, NJ
Trusted Seller
7.3 Meter
- used
Used 22" wide x 23' long stainless steel cooling tank mounted on rails with powered conveyor rollers, spray bars. No lid included. Mounted on adjustable height stand.
Hainesport, NJ
Trusted Seller
AMERICAN MAPLAN V2-125-V/2L
- used
- Manufacturer: Maplan
Used Battenfeld vacuum/cooling tank. Type V2-125-V/2L, serial #83-4058-67-01. Has 14" x 14" cross section x 18' long chamber with 10" opening. Includes (1) vacuum pump and (2) water pumps. (1) vacuum pump missing...
Hainesport, NJ
Leistritz Micro18-GGL Twin Screw Pelletizing Line – Industrial Polymer Extruder
- used
- Manufacturer: Leistritz
40425043 Used Leistritz Twin Screw Pelletizing Line, Model Micro18-GGL. 18 mm Screws, counter rotating screws, 40:1 1/d, 500 rpm screw speed, electrically heated, water cooled barrel, 2.3 kw, 210/260 volt, 2950 r...
Belvidere, IL
Trusted Seller
CO-EX BLOCK 6-Layer
- used
- Manufacturer: CO-EX BLOCK
Used extrusion co-ex Block last used in a laboratory environment with approximately 1.25" diameter extruders and a 12" sheet die. Includes six (6) inserts of varying percentages. Five (5) are in a box and one (1)...
Hainesport, NJ
Trusted Seller
2000 CLOEREN 2.5", 3.5" and 5.25"
- used
- Manufacturer: CLOEREN
Used Cloeren 3-layer co-ex block designed for asymmetric layer configurations (A/B/C at 12/64/24%). For 2.5", 3.5" and 5.25" extruders. Manufactured 2000 Never used. Feed block is a variable geometry vein type.
Hainesport, NJ
Trusted Seller
LEISTRITZ 30mm
- used
- Manufacturer: Leistritz
Used 30mm Leistritz counter-rotating twin screw extruder, 42/1 L/D vented barrel. New 1987. Has 11kw motor, 2200 rpm, 422 volt input. Gearbox rated at 13.5kw at 60hz. Barrel is electrically heated and air cooled ...
Hainesport, NJ
Coperian 30 mm – ZSK-30 – New 2010 Co-Rotating Twin Screw Extruder
- used
Coperian 30 mm – ZSK-30 – New 2010 Co-Rotating Twin Screw Extruder Screw Diameter 30mm L/D Ratio 30:1 Number of Zones: 9-1 Feed, 3 Vented, 1 Side Feeder & 4 non vented Includes Side Feeder 15 HP Water Cooling 4...
Rockville Centre, NY
Trusted Seller
Koellmann CG14-0-201
- used
- Manufacturer: Koellmann
Used 53mm NFM Welding Engineers side feed extruder with no barrel or screws. Has Koellmann gearbox, size CG14-0-201, serial #1227336/1, with 5.06/1 ratio, service factor 1.0, input rpm 1750, output rpm 350, ratin...
Hainesport, NJ
Trusted Seller
WERNER & PFLEIDERER ZSK20
- used
- Manufacturer: WP
- Model: ZSK20
Used Werner & Pfleiderer model ZSK40, 40mm co-rotating twin screw extruder. 1990 model year. 46:1 L/D vented barrel with 11-barrel sections and a 41" centerline height. Driven by 50 hp 500 volt 1750/2100 rpm DC m...
Hainesport, NJ