Used Extruders

Trusted Seller
1997 Piovan T1000IX
- used
- Manufacturer: Piovan
Used 1000 liter Piovan stainless steel drying hopper. New 1997. Hopper model T1000IX. Hoppers are approximately 36" diameter X 8' tall.
Hainesport, NJ
Trusted Seller
THORESON MCCOSH TD2000
- used
- Manufacturer: Thoreson McCosh
Used 6,000 lb. Thoreson McCosh Desiccant Dryer Model TD2000. Serial #201-703-05. 480 volt, AC input, 20 hp. Amps 236.0, kw 182.0. No hopper included.
Hainesport, NJ
Trusted Seller
UNA-DYN GS150
- used
- Manufacturer: Una-Dyn
Used Una Dyn Piovan Desiccant Dryer. Model GS150, serial #237240-01-01-0903. Rated at 150 cfm. Includes approximately 800 LB., 30" diameter x 72" straight side x 19" cone bottom insulated hopper with top mounted ...
Hainesport, NJ
Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled
- used
- Manufacturer: Davis-Standard
10755162 Used Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled and non-vented barrel at nominal 44" center-line. 15.08:1 Gearbox reduction ratio; Rated at 1...
Belvidere, IL
Trusted Seller
RANDCASTLE Ø19 мм, L/D 24:1
- used
- Manufacturer: RANDCASTLE
Used Randcastle Laboratory Sheet Extrusion Line Consiting of the Following Items: - .75" Randcastle 24/1 L/D extruder with temperature control panel, model RCP0750, serial #J2271. - 2" O.D. x 8" wide chill roll s...
Hainesport, NJ
Trusted Seller
BRABENDER 88
- used
- Manufacturer: Brabender
Used 25mm 24/1 L/D Brabender twin screw extruder package. Has air cooled extruder, temperature control panel, type D10002, prep center with model 088 type 09-25-000 temperature pressure module. Includes 10 HP DC ...
Hainesport, NJ
Trusted Seller
4.5" Hydraulic Screen Changer With Pump
- used
Used 4.5" Hydraulic Screen Changer hydraulic pump and stand. Missing breaker plates. Includes approx. 11" wide strand die without die plate. Last used on 4.5" Prodex extruder.
Hainesport, NJ
Trusted Seller
BERINGER 12"
- used
- Manufacturer: BERINGER
Used 12" Beringer slide plate screen changer Model 1200. Mounted on stand for 42" centerline height. Includes an upstream adapter for a 160mm twin screw extruder, a 10 hp hydraulic power pack and screen changer s...
Hainesport, NJ
6″ Davis Standard 34:1 -500 HP -Vented (2 vents) Extruders (2 available)
- used
- Manufacturer: Davis-Standard
6″ Davis Standard 34:1 -500 HP -Vented (2 vents) Extruders (2 available)
Rockville Centre, NY
Trusted Seller
CO-EX BLOCK 6-Layer
- used
- Manufacturer: CO-EX BLOCK
Used extrusion co-ex Block last used in a laboratory environment with approximately 1.25" diameter extruders and a 12" sheet die. Includes six (6) inserts of varying percentages. Five (5) are in a box and one (1)...
Hainesport, NJ
Trusted Seller
2000 CLOEREN 2.5", 3.5" and 5.25"
- used
- Manufacturer: CLOEREN
Used Cloeren 3-layer co-ex block designed for asymmetric layer configurations (A/B/C at 12/64/24%). For 2.5", 3.5" and 5.25" extruders. Manufactured 2000 Never used. Feed block is a variable geometry vein type.
Hainesport, NJ
3.5″ Davis Standard 24:1-Air Cooled -N-Vented Extruders (3) 1998
- used
- Manufacturer: Davis-Standard
3.5″ Davis Standard Extruders Model #MV35IN35 – New 1998 (Three Available) Air Cooled 24:1 L/D Non-Vented HP 158 Gear Ratio: 17.39 SF 1.25
Rockville Centre, NY
Trusted Seller
LEISTRITZ 30mm
- used
- Manufacturer: Leistritz
Used 30mm Leistritz counter-rotating twin screw extruder, 42/1 L/D vented barrel. New 1987. Has 11kw motor, 2200 rpm, 422 volt input. Gearbox rated at 13.5kw at 60hz. Barrel is electrically heated and air cooled ...
Hainesport, NJ
Trusted Seller
1997 Piovan T1000IX
- used
- Manufacturer: Piovan
Used 1000 liter Piovan stainless steel drying hopper. New 1997. Hopper model T1000IX. Hoppers are approximately 36" diameter X 8' tall.
Hainesport, NJ
Trusted Seller
1997 PIOVAN T6000ix
- used
- Manufacturer: Piovan
Used 6000 lb Piovan stainless steel drying hopper. New 1997. Hopper model T6000ix. Hoppers are approximately 60" o.d. X 14' tall.
Hainesport, NJ