Used processing in Illinois, USA

Werner & Pfleiderer Mixer/Extruder – Type UK12-AU3, 21 Gallon Capacity, Carbon Steel

• Manufacturer: WP

48594 Used Werner & Pfleiderer Mixer/Extruder, Type UK12-AU3. 21 Gallon (80 liter) working capacity, 29.1 gallon (110 liter) total capacity. Material of construction is carbon steel on product contact parts. 20-1...

Welex HS 3.0 40D SV Single Screw Extruder | 3" Screw | 40:1 L/D | 1520 RPM | 550 HP VFD Drive | Vented Barrel

• Manufacturer: Welex

54129004 Used Welex HS 3.0 40D SV Single Screw Extruder | 3" Screw | 40:1 L/D | 1520 RPM | 550 HP VFD Drive | Vented Barrel. 1520 RPM max. screw speed. Electric heated, air cooled barrel. Vented barrel. 57" barre...

Davis Standard 1.5" Extruder – Model 150IN DS-20, 24:1 L/D, Vented Barrel, 50 HP Gearbox

• Manufacturer: Davis-Standard
• Model: 150IN DS-20

10755179 Used Davis Standard 1.5" Extruder, Model 150IN DS-20. 24:1 L/D vented barrel at a 42" centerline. Davis Standard 6.53:1 gearbox rated for 50 HP with a service factor of 1.25 for a 152 RPM screw speed. Ge...

Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled

• Manufacturer: Davis-Standard

10755162 Used Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled and non-vented barrel at nominal 44" center-line. 15.08:1 Gearbox reduction ratio; Rated at 1...

AET dual diameter 10-6 32:1 L/D 50” centerline height film reclaim extruder

• Manufacturer: 60T 100D32

51068003 Used AET dual diameter 10-6 32:1 L/D 50" centerline height film reclaim extruder, Model 60T 100D32.

Gloucester Model 35250R2 3.5" Diameter Single Screw Extruder – Industrial Used

• Manufacturer: GloucesterGloucester

10755151 Used Gloucester Model 35250R2 3.5" Diameter Single Screw Extruder. 3.5" diameter screw, 32:1 L/D. Has an electrically heated, air cooled, vented, and plugged barrel at approximately a 65? center line hei...

Gloucester 25225R2 Single Screw Extruder – 2.5" Dia., 32:1 L/D, 60 HP Motor

• Manufacturer: GloucesterGloucester

10755152 Used Gloucester Single Screw Extruder, Model 25225R2. 2.5' Diameter Screw, 32:1 L/D. Has an electrically heated, air cooled, and non-vented barrel at approximately a 65? center line height. Barrel is se...

Buy Farrel Co-Rotating Twin Screw Extruder with Gala & Acrison Feeder

• Manufacturer: Acrison

54182001 Used Farrel Twin Screw Pelletizing Line Consisting Of: (1) Farrel 37 mm FTX80 co-rotating twin screw extruder, 5 zone electrically heated, water cooled, approximately 40:1 L/D. Driven by a 25 hp, 500 vol...

Leistritz ZSE 100 GLAAX 100mm Co-Rotating Twin Screw Extruder

• Manufacturer: Leistritz

10151570 Used Leistritz ZSE 100 GLAAX 100mm Co-Rotating Twin Screw Extruder, Driven by 330 kw (442 hp), 1600 rpm DC motor with SCR control. Has 300 rpm screw speed, rated at 5000 Newton meters per shaft torque c...

PET Sheet Extrusion Line – 48” Wide, 2,000 lbs/hr, OMV D140 Extruder, (

54129001 Used PET Sheet Extrusion Line Capable up to 48" Wide, currently has 32"W Allied Flex-Lip Extrusion Die. 2,000 lbs/hr, OMV D140 Extruder (Used) 350 HP main motor; 30 HP drive system; Rated up to 2,000 l...

Winkworth ZX500-6 Z-Blade Mixer-Extruder | 500L Working | Vacuum Lid | Jacketed | 304 SS | With Tool Temp Units

• Manufacturer: Tool Temp

10151559 Used Winkworth ZX500-6 Z-Blade Mixer/Extruder | 500L Working | Vacuum Lid | Jacketed | 304 SS | With Tool Temp Units. 500 liter (132Gal) working capacity with a 778 liter total capacity (product dependen...

Leistritz MIC 27-GL-36D Twin Screw Extruder – 27mm, 36:1 L/D, 15.75 HP, Co-/Counter-Rotating, Built 2006

• Manufacturer: Leistritz

10755170 Used Leistritz Twin Screw Extruder, Type MIC 27-GL-36D. (2) 1.05" (27 mm) diameter screws. 36:1 L/D Ratio. Co-rotating. 8-barrel housing section electrically heated, water cooled. (1) Degassing port. Max...

Lleal AME-2600 SF-H Double Sigma Extruder Kneader | 350 Gal Working | Vacuu

• Manufacturer: Sigma

54020001 Used Lleal Model AME-2600 SF-H Double Sigma Extruder Kneader, 316 Stainless Steel. Useful volume 350 gallon, total volume 2,600 liter (680 gallon). Vacuum Rated 356 degrees F at 60psi. Sigma blades. Hyd...

Leistritz Micro18-GGL Twin Screw Pelletizing Line – Industrial Polymer Extruder

• Manufacturer: Leistritz

40425043 Used Leistritz Twin Screw Pelletizing Line, Model Micro18-GGL. 18 mm Screws, counter rotating screws, 40:1 1/d, 500 rpm screw speed, electrically heated, water cooled barrel, 2.3 kw, 210/260 volt, 2950 r...

Gloucester 3.5" Single Screw Extruder – Model 35250R2, 32:1 L/D, 100 HP Motor

• Manufacturer: GloucesterGloucester

10755150 Used Gloucester 3.5" Single Screw Extruder, Model 35250R2. 3.5" diameter screw, 32:1 L/D. Having an electrically heated, air cooled, and non-vented barrel at approximately a 65" center line height. Barre...