Used processing in Illinois, USA

CLOEREN 35.5″ HD40 SHEET DIE 16974

Cloeren / Production Components model HD-40 sheet die with a 35.5″ slot opening. Integral flexible upper lip and fixed lower lip. Adjusting bolts are located on 1″ centers. 0.004″ flex adjustment. Coat hanger man...

JOHNSON 8″ X 30 TWO 16936

• Manufacturer: Johnson

Johnson two roll pull roll stand driven by a “Drive-All” 3HP DC motor and gearbox. Pull rolls operate at 1.0, 2.07, 5.058, and 10.651:1 ratios. Pull rolls are 8″ diameter x 30″ wide and have not been used since r...

CLOEREN 36.5″ WIDE SHEET DIE 16641

Cloeren heavy body sheet die. S/N R13-0000-12. 36.5″ wide opening with a micro adjustable upper lip and a fixed lower lip. 3/4″ back center feed missing end plates. Two adjusting bolts and electrical connectors. ...

STEER ENGINEERING 12mm TWIN SCREW 16620

Steer Engineering Pharmaceutical twin-screw extruder, S/N EA00427. Model Omicron 12P new in 2014. Screw diameter is 12mm diameter ratio (do/di) is 1.45 flight depth is 1.9 max screw speed is 900 RPM 2HP drive, 48...

8″ SLIDE PLATE SCREEN CHANGER 16534

Slide plate 8″ screen changer, hydraulically operated. No hydraulic power pack. Includes breaker plate.

EDI 52″ AUTO-FLEX CONTOUR DIE 16438

• Manufacturer: EDI

Extrusion Dies, Inc. Auto-Flex AF6R HM40 – 52″ wide contour die. S/N 11-30268. Manufactured in 2011. 14 heater zones. 480V/1ph/60Hz operation. Chrome plated flow surfaces 52 each AF6R lip adjustments. 0.500″ lip ...

KILLION 1.250″ 30: 7.5 HP 16432

One used Killion model KN-125 1.25” 30:1 extruder having a four (4) zone electrically heated, air cooled, and non-vented barrel at approximately a 39″ centerline height. Gearbox is a Koellmann model PEZS-20 and h...

WAYNE 8″ X 5″ HORIZONTAL 16359

Wayne horizontal roll stack, S/N 9545. Five (5) 8″ wide x 5″ diameter rolls. Three (3) chrome and two (2) rubber. Each roll has a rotary union for cooling. Powered by two gearhead motors. Operator controls and on...

50″ EDI ULTRAFLEX SHEET DIE 16276

• Manufacturer: EDI

Extrusion Dies, Inc. Ultraflex 50″ U40 Sheet Die, S/N 97-19664. Rear 1.250″ diameter center back material entry with a 90 degree adapter. 0.001″ to 0.030″ lip opening. 0.750″ lip land. Five (5) 240V/1ph/60Hz heat...

CHROME ROLL 10″ X 36″ 16019

10″ diameter x 36″ chrome roll cored for water cooling.Two are available.

MELT PUMP SHV350-8A 12728

Melt pump model SHV350-8A, S/N 95226034-00001000. 15HP 500 volt 1,750 RPM DC motor. True 20:1 gearbox rated at up to 5.85HP maximum. Last used on a 3.5″ extruder.

GLOUCESTER 233-011 3.5″ EXTRUDER 12878

Gloucester 3.5″, 24:1 L/D extruder model number 233-011. S/N 233-19848-01. Electrically heated air cooled vented and plugged barrel on a 42.5″ centerline. Free standing eight zone control panel with temperature c...

WELEX TWO STAGE 4.5″ EXTRUDER 12344

• Manufacturer: Welex

Welex 4.5″ extruder screw, 2 stage 36:1 L/D, S/N 180359.

NEW / UN WELEX 4.5 12346

• Manufacturer: Welex

New chrome plated Welex 4.5″ extruder screw, S/N 18079. 36:1 L/D, 8″ long x 1″ wide, keyway 190.5″ overall length.

DAVIS STANDARD 4.5″ SINGLE STAGE 12018

• Manufacturer: Davis-Standard

Davis Standard 4.5″ single stage extruder screw. Approximately 28:1 L/D with four rows of mixing pins.