Used processing

Dryer-Flaker Drum and Belt 1,524 mm (60 in) Carbon Steel - IPP# 28792

• Manufacturer: Blaw Knox

Single drum flaker Grooved drums, 1/8" groove every 1" 316SS vac chamber housing. W/spare drum Roll face is grooved on 1' spacings

Dryer-Flaker Drum and Belt 508 mm (20 in) Stainless Steel 316 - IPP# 232579

• Manufacturer: Gouda

508mm diameter x 508mm face pilot size 316 stainless steel drum flaker 316 stainless steel jacketed feed pan with manual raise/lower mechanism carbon steel knife with a copper replaceable blade and manual adjustm...

Stainless Steel Dryer-Flaker Drum and Belt - IPP# 228257

• Manufacturer: Berndorf belt systems

belt flaker, with Accu-Drop Pastillator and Variable Speed Drive Belt system is 60" wide x 75 feet long. With six (138" x 59" x 5'5") water collectors 190 Gallons rated for 55 degrees F. Six water spray systems, ...

Dryer-Flaker Drum and Belt 600 mm (23.6 in) Stainless Steel 316 - IPP# 704988

• Manufacturer: APV Mitchell

drum flaker/dryer Single drum design Drum and applicator roll cored for steam heating Drum driven by Carter gearbox, Size MF14/100340 2.71 KW @ 960 rpm belt driven by 3 KW, 3/50/415 volt, 700 rpm flameproof motor...

Escher Wyss Dryer-Flaker Drum and Belt - IPP# 702508

• Manufacturer: Escher Wyss

30" (800mm) dia x 40" (1000mm) long long chrome plate cast iron single drum flaker Totally enclosed in SS casing w/MS ribbing (not vac rated) Roll surface area: 0.5026 sq meter Fitted w/an unused replacement drum...

Stainless Steel 316 R.Simon Dryers Stearine acid Dryer-Flaker Drum and Belt - IPP# 215236

• Manufacturer: Simon

single drum flaker, with dip tray working pressure 6.9 bar max, design pressure 6.9 bar @ 170 degrees C steam heated drum with rotary unions drum speed variable from 0.7 to 7 rpm, adjustable knife discharge with ...

Dryer-Flaker Drum and Belt 609.6 mm (24 in) Stainless Steel 304 - IPP# 210324

• Manufacturer: Steel Belt Systems

(2) 20” wide water cooled Rolls are driven by a varispeed drive, one roll is 7" diameter, the other is 16" diameter Material drops onto a stainless steel water cooled belt (similar to a Sandvick). With lump break...

Dryer-Flaker Drum and Belt 1,500 mm (59.1 in) Stainless Steel - IPP# 706652

• Manufacturer: Sandvik

1.5m wide x 24.85m long rotoform cooling conveyor/belt Drawing Number 6530. 5m long hot water section 17.5m cooling water section Cooling water capacity: 185 GPM @ 30 psi, Hot water zone has 16 sprays x 4 runs x ...

Dryer-Drum 1,360 mm (53.5 in) - IPP# 106897

cast iron dryer/flaker drum W/end and shaft For drum dryer

Dryer-Drum 995 mm (39.2 in) - IPP# 79741

cast iron drum for dryer Blt for working pressure of 10 bars

Dryer-Drum 1,360 mm (53.5 in) - IPP# 106894

UNUSED cast iron dryer/flaker drum W/end and shaft

Dryer-Drum 995 mm (39.2 in) - IPP# 79742

cast iron drum for dryer Blt for working pressure of 10 bars

Dryer-Drum 1,360 mm (53.5 in) - IPP# 106895

cast iron dryer/flaker drum W/end and shaft For drum dryer Design pressure 147 psi (10 bar), steam pressure 357 deg F

Dryer-Drum 1,829 mm (72 in) - IPP# 100741

• Manufacturer: R.Simon Dryers

total face cast iron single drum dryer drum manufactured by Black Clawson serial #10062/4130, S.H 51mm, H.D 76mm, H.D.R 2362mm drum cored for steam heating (4) cast iron applicator feed rolls (1) Cast steel knife...

Simon Dryers Dryer-Drum - IPP# 703709

• Manufacturer: Simon

cast iron R Simon single drum dryer Dryer includes (3) + (1) 316SS 9" feed rolls working pressure 3 bar (6 bar tested) w/(2) pneumatic and (1) manual operated feed roll scrapers Scraper knifes mfd form tufnol bea...