Used processing

Dryer-Fluid Bed 700 L (184.9 gallons) Stainless Steel 304 - IPP# 208432

• Manufacturer: Glatt

load weight 300 kg special Vitamin-A-Pulver, with cyclones heater and cooler and de-dusting system Filter housing is 1.6m diamter, 2.5mm thick, with (59) bags, at the bottom of the filter housing is a tapered sec...

Dryer-Flaker Drum and Belt 28 mm (1.1 in) - IPP# 70983

• Manufacturer: APV Mitchell

chrome plated single drum flaker Drum pressure 0.42 bar DC thyristor controlled varispeed drive. Roll speed 10-100 rpm. Heating low pressure steam system of 0.1 bar. Doctor manual adjustable knife made of carbon ...

Dryer-Flaker Drum and Belt 300 mm (11.8 in) Stainless Steel 316 - IPP# 706870

• Manufacturer: Maschinenbau Technik

301/321/316 stainless steel pilot scale horizontal belt flaker system with a pastillator size 300 x 4000mm fabrik #02.331 CE #2.02032, 321 stainless steel belt is driven by a 2.2kw motor via a 1.35kw 316 stainles...

Stainless Steel Dryer-Flaker Drum and Belt - IPP# 228256

• Manufacturer: Berndorf belt systems

belt flaker, with Accu-Drop Pastillator and Variable Speed Drive Belt system is 60" wide x 75 feet long. With six (138" x 59" x 5'5") water collectors 190 Gallon rated for 55 degrees F Six water spray systems, 11...

Dryer-Drum 762 mm (30 in) Stainless Steel 316 - IPP# 71315

single drum dryer Drum driven by 12 KW motor and reducer Cored drum Packing gland on shaft Outboard bearings Dual knife discharge, manual knife adjustment into 8" dia screw conveyor

Dryer-Drum 914.4 mm (36 in) Carbon Steel - IPP# 79738

drum for dryer Blt for working pressure of 10 bars

Dryer-Drum 508 mm (20 in) - IPP# 102227

• Manufacturer: Blaw Knox

chrome plated single drum dryer Has jkt feed pan Belt driven by US varidrive Motor: 3 phase 3/60/230/460 volt, 5.4 rpm min 54 rpm max Has hood 12" x 30" side access panel Has 8" x 8" discharge w/chute and manual ...

Dryer-Drum 456 mm (18 in) Stainless Steel 316 - IPP# 704610

• Manufacturer: Simon Dryers

single drum dip feed dryer M/C #4586 Drum cored for steam heating (2-50mm openings) Speed 1 to 6 rpm Drum totally enclosed in 316 stainless steel chamber Motor: non-flameproof motor Drum with monel adjustable sta...

Dryer-Drum 1,500 mm (59.1 in) - IPP# 703631

• Manufacturer: Gouda

chrome plated drum dryer Single drum dryer varispeed motor (4) applicator rolls, manually adjustable Drum gear driven (no motor). Openings: drum 1-87mm, 1-19mm

Dryer-Rotary Vacuum Paddle - IPP# 247266

Dryer-Twin Shell & Double Cone - IPP# 247137

Dryer-Air - IPP# 210341

• Manufacturer: Ingersol Rand

air cooled design 13.9 KW

Dryer-Twin Shell & Double Cone 2.8 m3 (100 ft3) Titanium - IPP# 13589

• Manufacturer: Komline Sanderson

Job # 1-566. Jkt and shell mfd by Panhandle (Tranter) SN P6501H Shell measures 72" ID w/outboard pillow block bearings on short stands (Orig on concrete piers) w/packing gland Setup for chain and sprocket drive (...

Dryer-Twin Shell & Double Cone 1.13 m3 (40 ft3) Glasslined - IPP# 21644

• Manufacturer: Pfaudler

48" dia shell 18" charge port (no cover), 8" discharge (no valve). Bare body only.

Dryer-Air - IPP# 210342

• Manufacturer: Ingersol Rand

water cooled air dryer