Used processing

Stainless Steel 304 NEU Engineering Dryer-Fluid Bed - IPP# 705589

• Manufacturer: NEU Engineering

static fluid bed dryer system reference number K5/8-88-001A Bed temperature 100 - 120 degrees C Bed with (2) pneumatic operated hinged weir plates weir height range 140mm - 250mm Dryer chamber approx. 920mm wide ...

Stainless Steel 304 Glatt WSG Dryer-Fluid Bed - IPP# 704867

• Manufacturer: Glatt

15 Kg bed dryer system Heating capacity 68000 BTU/hour Steam pressure 3 bar air (compressed) 6 bar with removable trolley Drying chamber in (3) sections: (1) 21 1/2" diameter x 12" straight side; (1) 21 1/2" diam...

Dryer-Fluid Bed 100 L (26.4 gallons) Stainless Steel 316 - IPP# 703696

• Manufacturer: Arthur White

50 Kg With 2 stainless steel bins on wheels with Davidson "M" Series fan non-flameproof motor Unit complete with bag shaker, damper pulsator, temperature gauge and socks Dryer housing is carbon steel With on/off ...

Dryer-Fluid Bed Stainless Steel 321 - IPP# 703559

• Manufacturer: Glatt

agglomerator spray arm Glatt WSG-60 range dryer

Dryer-Fluid Bed 500 L (132.1 gallons) Stainless Steel 316 - IPP# 703094

• Manufacturer: Calmic (William Boulton)

200 Kg polished 316 stainless steel bin with agitator dryer complete with steam heater and fan steam heater battery manufactured by Thermo Eng serial # 82347 test pressure 42 kg/square meter fan manufactured by F...

Dryer-Fluid Bed 500 L (132.1 gallons) Stainless Steel - IPP# 208218

• Manufacturer: Glatt

Air circulation fan is 12,5 KW, 50/220/380 Volt @ 3000rpm.

Dryer-Fluid Bed 700 L (184.9 gallons) Stainless Steel 304 - IPP# 208433

• Manufacturer: Glatt

300 kg special Vitamin-A-Pulver with cyclones heater and cooler and de-dusting system Filter housing is 1600 mm diamter, 2.5mm thick with (59) bags at the bottom of the filter housing is a tapered section that ha...

Dryer-Flash 4,626 m3/h (2,723 CFM) - IPP# 203553

• Manufacturer: Aljet

2500 lbs/ hour feed, 2357.5 lbs/hr product feed rate, .3 to .4% product moisture. with integral internal classifier, 1.75" venturi feed injector. Cyclone collector discharge, model 30, with 10 CuFt Vortex breakin...

Dryer-Flaker Drum and Belt 1,067 mm (42 in) - IPP# 49609

chrome plated drum only Cast iron construction

Stainless Steel 304 Steel Belt Systems Dryer-Flaker Drum and Belt - IPP# 229478

• Manufacturer: Steel Belt Systems

approx 28.8 square meter 301 (NICRO 12.1)/304 stainless steel enclosed horizontal belt flaker with Pastillator 1.5m wide x 18000mm cooling length 301 (NICRO 12.1) stainless steel belt 19250mm belt length between ...

Dryer-Flaker Drum and Belt 300 mm (11.8 in) - IPP# 704614

• Manufacturer: R.Simon Dryers

face chrome plated single drum flaker/dryer Drum working pressure 5.5 bar, speed 3 to 21 rpm, cored for steam/hot oil heating

Stainless Steel 304 Dryer-Flaker Drum and Belt - IPP# 210305

• Manufacturer: Gunter Stenger

with (2) 20” wide water cooled chrome plated calender rolls on the belt feed end to smooth out the hot product dropping onto the chill belt Rolls are driven by a varispeed drive, one roll is 7" diameter, the othe...

Blaw Knox Model F Dryer-Drum - IPP# 108327

• Manufacturer: Blaw-Knox

double drum dryer with chrome plated rolls .008 to .010 chrome plating on drum surface 75 rockwell hardness drum Serial #17107 2 1/2" rotary steam joint Includes SS fume hood

Dryer-Drum 800 mm (31.5 in) Stainless Steel 304 - IPP# 202748

Equipped with a jacketed bath Sprocket driven hydraulic adjustable discharge knife

Dryer-Drum 304.8 mm (12 in) Stainless Steel 316 - IPP# 102517

• Manufacturer: Buflovak/Blaw Knox

single drum dip feed dryer Drum cored for steam heating Manual knife discharge Has 15" x 19" CS jkt feed pan 3/60/230/460 volt, rated 44 rpm max, 8.8 rpm min