Used processing in Utrecht, Netherlands

Dairy built separator

Bactofugat sterilizer unit, heating bactofugat to approx 140 °C by steam injection in a jacketed injector vessel, cooling by remixing in the mik stream. Including: injector vessel, collecting tank with level sens...

1984 Klokslag Pawl conveyer press

• Manufacturer: Klokslag

Pawl conveyer press for cheese moulds consisting out of 2 rows of 40 cylinders each total 80 press places.1 cylinder 1 mould, With pneumatic infeed system and spray pipe for cip cleaning. Including 2 sets of micr...

N.N. Resting tube

• Manufacturer: N.N.

Resting tube existing out of 2 parts. Diameter 140 mm, length 50 + 150 cm. Volume: 7,5 + 22,5 = 30 ltr in total = 1 minute at 1.800 ltr/h. Connections: 2'', DIN. Including pressure indicator and PT-100 sensor. To...

Tebel Casomatic

• Manufacturer: Tebel

6 Glasses of Tetra Pak/Tebel Casomatic cheese towers. Diameter 310 mm and lenght 470 mm.

1987 Simon Freres BAC 10000

• Manufacturer: Simon
• Model: BAC 10000

Butter silo with 2 augers, CIP cleanable, manhole, flange with 4 connections but with 3 outfeed lobe pumps (simon freres) and cip return pump. control panel. Total dimensions: 600 x 250 x 330 cm.

2005 Indag DLM-3

• Manufacturer: Indag

Peddle gentle inline mixer. Rotor diameter: 32 mm. Length 38.5 cm. 12 Peddles on rotor. Single jacketed. Shaft speed: 950 rpm. Connections: in 150 mm / out 150 mm, Flange. Motor: 1,5 kW - 400 V - 3,9 A - 50 Hz - ...

1995 Karl Schnell 670

• Manufacturer: Karl Schnell

Hopper with 2 augers and eccentric screw pump. Bottom of hopper stainless steel with stainless steel augers. Top part or hopper polycarbonate. Open top with 3 covers. 2 CIP spray bowls. Augers and eccentric screw...

1977 Alpma K-65/Ach

• Manufacturer: Alpma

Red cellufane wrapping for babies Edam cheese diameter ± 10cm - Motor 0.3 kW - Total dimensions 243 x 120 x 200cm.

Interceptor

Interceptor. Dimensions outside: Diameter: 36 cm .; Height: 5.4 m.

Mobile stainless steel bin

Mobile stainless steel bin. 83 x 43 x 92cm.

Tebel Cheese mould outblow device

• Manufacturer: Tebel

Cheese mold outblow device. Mold size ± 38 x 38 cm. Infeed of the mold without lid upside down. First step cheese outblow of the mold. Second step lifting of the mold from the cheese (2 lifting steps to conveyor)...

Hilge Hygia SI 25A

• Manufacturer: Hilge

1.5 KW, 3.4A, 2855rpm. Impellor diameter: 145mm. Pressure: 1.5 bar, Connections: inlet 1.5:", outlet: 1.5 "DIN.

PRG 71 L2

• Manufacturer: Präzisions Rührer Gesellschaft (PRG)

Präzisions Rührer Gesellschaft (PRG) inline mixer. Motor 0.55 kW . N2: 635-106 rpm. 3x mixing points of 4 blades on the rotor. Effective rotor length: 30 cm, total rotor lenght: 35 cm. Connections: In 4''/2'' DIN...

1998 Schröder VR3

• Manufacturer: Schroeder

Visor engine, maximum working pressure 50 bar. 15 kW engine, 1460 rpm. Total dimensions: 170 x 80 x 100 cm.

2008 Self-cleaning filter

Self cleaning filter with pneumatic cylinder. Total length 184 cm.