Used processing

China Machine Cut to Length Cheap Price Good Quality

• Manufacturer: MH

Coil processing line to shear and slit steel. Shearing line: 0.3~25mm thickness with different model machine, speed up to 90m/min. Slitting line: 0.25-14mm thickness with different coil width. Max speed: 120m/min...

Jp 3-1550 Cut to Length

• Manufacturer: MH

Coil processing line to shear and slit steel. Shearing line: 0.3~25mm thickness with different model machine, speed up to 90m/min. Slitting line: 0.25-14mm thickness with different coil width. Max speed: 120m/min...

Cut to Length - Stop Shear

• Manufacturer: MH

This line man specifications: Max coil width, 2000 mm Max coil weight, 35 tons Material, hot rolled steel Thickness, 4-12 mm Max speed, 20-40 m/min Feature: Flying shear can reach high speed for heavy material wi...

Cut-to-length line FIMI 2000x8mm x30t (A3769)

• Manufacturer: FIMI

Cut-to-length line FIMI 2000mm x8mm x 30t can help you handle all your cutting needs with sheet metal up to 8mm thickness, 20000 mm width and 30t maximum coil weight. This line is equipped with two levelers to pr...

FIMI 1250x.12-.80mm Tinplate Sheeting Line #0111

• Manufacturer: FIMI

€ 450.000 Installed and in operation Built: 1982 Revamped: 2008 and 2019 Process materials: tinplate; + also carbon and stainless steel (both raw and annealed) Sheet dims.: from 340x500mm to 1250x2000mm Max...

72″ x .075″ x 40000Lb Rowe / Herr Voss CTL Line

• Manufacturer: Herr Voss

used cut to length line for sheet metal processing 72″ x .075″ x 40,000Lb Rowe / Herr Voss CTL Line Entry Coil Car Floor Standing V-Type Design Powered Lift & Traverse Control Panel Mandrel Uncoiler 4-Leaf Mandre...

Hangji Cut to Length Line Flying Shear Machine for Hot Rolled Steel and Cold Rolled Steel

• Manufacturer: Hangji

Gripping shear The function of the gripping shear The gripping shear is located in the entrance of the pre-finishing mill and finishing mill, it is used to protect the pre-finishing mill and finishing mill by cut...

Hangji Flying Shear High Speed Wire Rod Line Cut to Length

• Manufacturer: Hangji

Gripping shear The function of the gripping shear The gripping shear is located in the entrance of the pre-finishing mill and finishing mill, it is used to protect the pre-finishing mill and finishing mill by cut...

Hangji Automatic Flying Shear Cut to Length for Steel Rolling Line

• Manufacturer: Hangji

Gripping shear The function of the gripping shear The gripping shear is located in the entrance of the pre-finishing mill and finishing mill, it is used to protect the pre-finishing mill and finishing mill by cut...

F&P 2500mm x 1-10mm Alu. CTLL #4376

• Manufacturer: Floreani & Partners

(For more details on this line please contact us, thank you) Line max. speed 50m / minute (max. 30m / minute recommended to reach laser cutting quality) Max tension on uncoiler for thickness range 1÷10mm: N 1...

Hangji Hangji Brand Cut to Length Shear

• Manufacturer: Hangji

The function of the flying shear 1, As the head and rear part of the rolling parts have some defect or the temperature of steel is too low, the flying shear need to cut the head and rear to insure the quality of ...

F&P 12mm CTL Lines (New) #3395

• Manufacturer: Floreani & Partners

New Flying Shear Cut To Length Lines 2100mm x 12mm HR, Galv., Pickled Steel CUSTOM DESIGNED -- 12m / 10 Tonne Sheet Stacker Speed max. 30m / min -- The process material -dry or oiled- is: galvanized, pickled st...

cut to length

INTRODUCTION ［Uncoiling Unit ］ ［Leveler ］ ［Feeder and Shear］ ［Stacking Unit］ Cut to Length Line A cut to length line is generally used for jobs like uncoiling, straightening, measuring, cross-cutting to length an...