Used processing in Texas, USA

THOMAS & MULLER CO. CONVEYOR (RIBBON)

• Manufacturer: Muller

CENTRIFUGE DISCHARGE CONVEYOR ; SS/304L, 14" DIAMETER X 14' LENGTH, RIBBON TYPE SCREW CONVEYOR, FINAL SPEED 40 RPM, MAX. TEMP. 100 C, MAX. PRESSURE 5" H2O, MAX RATE 600 lb/min, WEIGHT EMPTY 1280 lbs., FULL 1600 l...

CONVEYOR

ONE (1) SURPLUS CONVEYOR; SCREW TYPE; CARBON STEEL; 6"X 3'-0"; SINGLE SCREW; INFO ON FILE.

Cyclonaire Pneumatic Conveying System

• Manufacturer: Cyclonaire

One (1) Surplus Pneumatic Conveying System; Mfg: Cyclonaire; SN: C-13047; Project: 270368; YR: 2007; Carbon Steel; Pneumatic Diverter: 3" CS; Check Valve: 3" CS; Rail Pan 13" x 24" w/3" outlet; Coupler: 3" G.P. S...

Cyclonaire Pneumatic Conveying System

• Manufacturer: Cyclonaire

One (1) Surplus Pneumatic Conveying System; Mfg: Cyclonaire; SN: C-13045; Project: 270404; YR: 2007; Carbon Steel; Pneumatic Diverter: 3" CS; Check Valve: 3" CS; Rail Pan 13" x 24" w/3" outlet; Coupler: 3" G.P. S...

KAM FLEX CONVEYOR (BELT)

• Manufacturer: KAM FLEX

KANFLEX MODEL #704, S/N 96107, APPROX 3/4 HP GEAR MOTOR DRIVE. STAINLESS STEEL HOUSING.

AUGER FEEDER

• Manufacturer: Midwest Steel

NO NAMEPLATE, 38" LENGTH, 39" WIDE, 18" DEEP, OPEN 24" X 39", AUGER; STAINLEES STEEL, 62" LENGTH WITH 6" GAP PER BLADE, 7" OPEN

AUGER CONVEYOR

ONE (1) SURPLUS AUGER CONVEYOR; CARBON STEEL; WITH 6" AUGER X 10' LENGTH AND 6" BETWEEN FLIGHTS. UNIT HAS A 6" CIRCULAR DUMP AND THE TROUGH IS 8" DEEP. NO MOTOR DRIVE.

AUGER

• Manufacturer: Midwest Steel

USED STAINLESS STEEL SCREW AUGER; 7' X 7" TROUGH; FLIGHTS: 6"; SPACING: 4"; SHAFT: 2" DIAMETER; MOTOR DRIVE; INLET: 12"; OUTLET: 6"; NO TAG

DODGE SCREW CONVEYOR

• Manufacturer: Dodge

ONE (1) USED SCREW CONVEYOR; MFG. DODGE; MODEL TAO107L; 7" X 8" X 10' STAINLESS TROUGH; CARBON STEEL AUGER; 3" SHAFT; 6" FLITES; MOTOR AND BELT DRIVEN; MAX INPUT 1750 RPM; RATIO 30.9

GUSTAFSON SCREW CONVEYOR

• Manufacturer: GUSTAFSON

MIXER, S/N 8127, MODEL#FT4333B, MOTOR BY DAYTON ELECTRIC 1/2 HP, 1725 RPM, 115 VOLTS, FRAME 42, S.F. 1.0

SCREW CONVEYOR

13" RIBBON, 7' 13" LENGTH, 10" ON THE RIBBON, NO DRIVE OR SHAFT, BOLTED, SS

CYCLONAIRE PNEUMATIC CONVEYOR

• Manufacturer: CYCLONAIRE

PNEUMATIC CONVEYOR SYSTEM CONSISTING OF A 5 CUBIC FEET CONE BOTTOM BLOW TANK (G-425), VACUUM LOAD ADAPTOR WITH SNAP LOCK AND MECHANICAL FLAP (G-427), AND A 5 CUBIC FEET 304 SS SURGE HOPPER (G-428). DESCRIPTIVE DA...

CONVEYOR

ONE (1) CARBON STEEL SCREW CONVEYOR; 6" X 10'0"; CHAFF SURGE BIN CONVEYOR; SINGLE SCREW. INFO ON FILE.

PATTERSON CONVEYOR SCREW

• Manufacturer: Patterson

STAINLESS STEEL WITH DRIVE. Rating: 6" X 6 FT

B.W. SINCLAIR CONVEYORS

• Manufacturer: Sinclair

NIRO FLAT BELT; SLIDER PAN BELT CONVEYOR; 304 SS; 1'-06" X 17'-2"; DRIVEN BY 3 HP MOTOR @ 1750 RPM; 230/460 VOLTS; WT: 4,200 LBS;