Used Laminating in Veneto, Italy

Chain 35

Hot foil laminating machine in coil. useful width cm. 35.adjustable speed. thermostat for temperature control.rating: 7/10 | Useful width of lamination: 350 mm | Heated rollers: 140°C

Plasti 330 + Foil Kit

Useful light: 340 mm Paper inlet: 360 mm Adjustable speed: 0 - 1.6 m/min Max roller temperature: 170°C Max thickness: 5 mm Film thickness: 25 - 250 microns Roller diameter: Ø 44 mm Pressure adjustment: manual Rev...

Mono Eco 62

Single-sided hot stamping laminator for offset and digital printed matter. manual tack laminator with automatic tear-off. sturdy construction. automatic sheet overlap. cannot be connected inline with any sheet f...

MAMO Plasti 1100

Plasti 1100 is a hot and cold roll laminating machine with a larger useful span than plasti 635.the liner recovery rewinder kit makes plasti 1100 the best solution for cold laminating.the maximum laminating thic...

Chain 35

Hot foil laminating machine in coil with useful span of 35 cm. adjustable speed. thermostat for temperature control.rating: 7/10 | Useful width: 350 mm | Heated rollers: 140°C

MONTI ANTONIO D

• Manufacturer: Monti

Delaminating machine for separation and removal from knitted and woven fabrics and other continuous substrates, of: ⦁ Metallization films and foils ⦁ Special effects such as glitters, thermotransfer films (ex. sn...

MONTI ANTONIO L03

• Manufacturer: Monti

Calender for laminating/bonding with film/web, foil and effects, sublimation printing of fabrics in continuous, with pneumatic EXTERNAL PRESSING cylinder Ø HEATING CYLINDER 350 mm – 13,78 inch HEATING CYLINDER WI...

Sueco 160

• Manufacturer: Sueco

Lower shaft holder for laminating and adhesive at the same time Additional roll holder shaft Support base included

Practical 160H Pro

Professional calender for both cold and hot processing, thanks to the heated top roller and roll-to-roll system. Equipped with both foot control and normal control panel. Reverse anti-jamming function. Photocell ...

NPH1200 N Professional

Professional high-performance pouches laminating machine.Rating 9/10 4 rollers Digital controls for temperature setting and data storage Reverse anti-jamming Cold laminating function

PlastiAuto 520

PlastiAuto 520 laminating line, consisting of:- Maplas 520 laminating machine- Metaltap 520 high stack feederAutomatic sheet release (no trim).Rating: 9/10

Unilamine 350

Single- and double-sided hot lamination Tear-out perforator Adjustable snervator

MAMO Plasti 350 XP

Plasticizer for high production volumes and intensive uses, ideal for print shops and printing centers that need to handle the lamination and ennobling of digital prints in-house. The PLASTI 350 XP has been devel...

Unilamine 350S

Semi-automatic single- and double-sided laminating machine with friction feeder.Ideal for laminating on one or both sides as required with films up to 250 microns. Adjustable roller temperature. In single-sided l...

Replas 520

Replas 520 is an electric trimmer. Possibility of output connection with Maplas 520 laminating line. Sequential cuts of: paper, polyester, encapsulated prints.Rating: 7/10 Adjustable speed Electric panel for prog...