Used processing in Netherlands

Klinghammer 430

• Manufacturer: Klinghammer

Pre-owned combination machine with flanging and seaming (Bottom) operation.

1981 Klinghammer 430

• Manufacturer: Klinghammer

Pre-owned combination machine with flanging and seaming (Bottom) operation.

1995 Penalver MRC-400-S

• Manufacturer: Penalver

Quality used score post repair system for after a conversion press. The lacquer is applied through a spray station and is dried in a vertical (tower) pocket oven.

Karges Hammer endline for 99 mm sanitary ends (back-end)

• Manufacturer: Karges Hammer

Pre-owned two (2) units G1-105 compound liners and T2-105 electric vertical spindle ovens.

1997 BASCO PRE 48 L

• Manufacturer: Basco

Pre-owned vacuum leak tester from BA.SCO. with 48 heads.

2001 IST BD-133-4S/3x1-BLK-LTG-SLC

• Manufacturer: IST

Pre-owned UV end drying oven with totally 4-lamps 160W, including 3 interdeck UV units and overall cooling system. Used to be running behind a SPRINT 4-color printing press.

1973 Metal Box 628-BNM-2

• Manufacturer: Metal Box

Pre-owned necking machine with 6 stations. Tooling: 83 -> 80 mm | Can height min.: 70 mm | Can height max.: 175 mm | Can / ends diameter minimum: 52 mm | Can / ends diameter maximum: 100 mm | Can shape: necked-in...

2006 LTG Mailander coating line with 36 meter tunnel-oven

Pre-owned varnishing line with type LTG 470 coater. Cooling zone is 6 meters long with double sheet stacking boxes. Incinerator also from LTG, running on Natural Gas, volume 10,000 Nm3/h. Total length of the line...

1980 ASC CCV 30M74R

• Manufacturer: ASC - Automation Sciences Corporation

Quality used Coil Car and Rails to suit a variety of Cupper and Shell Press feed applications. Efficiently transfer and load coils as part of an integrated coil-handling system. Rotating models are available with...

Metal Box 314

• Manufacturer: Metal Box

Pre-owned high speed MB 314 press from the United Kingdom. For double die working, the press is complemented with the 5CA double wheel curler.

Karges Hammer P 4

• Manufacturer: Karges Hammer

Tooling: 52 mm | Can shape: round | Stroke: 50 mm | Tonnage: 32 T

1991 Cevolani CBW 2042

• Manufacturer: Cevolani

Tooling: 65 mm | Can height min.: 75 mm | Can height max.: 185 mm | Can / ends diameter minimum: 52 mm | Can / ends diameter maximum: 105 mm | Can shape: round | Speed (up to): 350 cans per minute

1991 Cevolani AT 410 B

• Manufacturer: Cevolani

Pre-owned high speed seaming machine with driving lifting tables.

1998 CEPAK TPM

• Manufacturer: CEPAK

Pre-owned OCSAM CEPAK transfer system to bring cutted blanks automatically to welding feeding unit.

Crown Cork & Seal curler

• Manufacturer: Crown

Pre-owned double deck curling station. Tooling: 73 mm | Can shape: round | Speed (up to): 1200 ends per minute