Used processing in Texas, USA

LITTLEFORD CB100 86535
- Manufacturer: Littleford
HIGH SPEED CONTINOUS PROCESSOR; CLAMSHELL DESIGN; BUILT IN 1993; 16" X 16" BOTTOM END DISCHARGE; 21 1/2" X 21 1/2" TOP FEED; ADJUSTABLE MIXING AND DENSIFICATION ZONES WITH 10" DIAMETER SHAFT WITH PADDLES AND PINS;
Cleveland, TX
STRONG-SCOTT TS-14 32188-4
- Manufacturer: Strong Scott
TURBOLIZER 1A; PREV USED ON ORLON FIBERS; AVERAGE VOLUME OF PRODUCT RETENTION .2 CU. FT.; SIDE DOOR STYLE; W/50 HP VARI-DRIVE REEVES, SIZE 661-K, GEAR RATIO 2.25:1, 1222 MAX RPM, 382 MIN RPM; 14" DIA X 42" LOW ...
Cleveland, TX
PFAUDLER DWV50310AKC 93835
- Manufacturer: Pfaudler
SIZE 3.000; WITH (2) 4 BLADE HUBS (NO BLADES); Qty: 1 | Rpm: 117 | Alloy: S | Ratio: 15-1 O.A. | Material: 316SS | Blade type: NONE | Driver type: VARI-DRIVE | Shaft dia.(in"): 2"/3" | Shaft length (ft'in"): 8'5"
Cleveland, TX
KRAUSS MAFFEI MT 4/300 114449
- Manufacturer: Krauss-Maffei
- Model: MT 4300
Used 186 cubic foot Nauta type conical orbital screw vacuum dryer. Mfg. by Krauss Maffei in 1991. Model #MT 4/300. 4000 liters (4m3) capacity. Conical orbital screw type. 300mm diameter screw size. Shell and jack...
Cleveland, TX
FLUID QUIP FQ-PS32E 113464
- Manufacturer: Quipp
Used Horizontal Paddle Screener. Mfg. by Fluid Quip. Model #FQ-PS32E. Carbon Steel Frame. 316 Stainless Steel Contact Parts. 40 Hp, 230/460 volts, 2700 RPM. 6" flanged feed inlet. 8" flanged discharge outlet.
Cleveland, TX
FLUID QUIP FQ-PS32E 113463
- Manufacturer: Quipp
Used Horizontal Paddle Screener. Mfg. by Fluid Quip. Model #FQ-PS32E. Carbon Steel Frame. 316 Stainless Steel Contact Parts. 40 Hp, 230/460 volts, 2700 RPM. 6" flanged feed inlet. 8" flanged discharge outlet.
Cleveland, TX
LANCASTER K-8 113530
- Manufacturer: Lancaster
- Model: K-8
"As Is, Where Is" Unused and Uninstalled Lancaster K-8 High Intensity Mixer. Dual Rotor High Intensity Mixer Type. Maximum Batch Capacity: 3000 liters or approximately 1680 kg of damp sulfur mix at a nominal loos...
Cleveland, TX
ROSS HSM-405 109041
- Manufacturer: Ross
HIGH SHEAR MIXER Qty: 1 | Alloy: S | Material: 316 SS | Driver type: MOTOR | Hp: 5
Cleveland, TX
LANCASTER K-8 113532
- Manufacturer: Lancaster
- Model: K-8
"As Is, Where Is" Unused and Uninstalled Lancaster K-8 High Intensity Mixer. Dual Rotor High Intensity Mixer Type. Maximum Batch Capacity: 3000 liters or approximately 1680 kg of damp sulfur mix at a nominal loos...
Cleveland, TX
LANCASTER K-8 113531
- Manufacturer: Lancaster
- Model: K-8
"As Is, Where Is" Unused and Uninstalled Lancaster K-8 High Intensity Mixer. Dual Rotor High Intensity Mixer Type. Maximum Batch Capacity: 3000 liters or approximately 1680 kg of damp sulfur mix at a nominal loos...
Cleveland, TX
BLENDERS 108046
- Manufacturer: J.H.DAY
NAUTA MIXER; 304SS SHELL; 304SS (DIMPLE TYPE) JACKET; SHELL 15 PSI @ 338 DEG. F.; JACKET 100 PSI @ 338 DEG. F.;
Cleveland, TX
MAC (HAYES & STOLZ) SSHPA21/0609 109039
- Manufacturer: Hayes & Stolz
CHARGING HOPPER/PADDLE BLENDERDESIGNED BY MAC EQUIPMENT; COMPLETE PACKAGED SYSTEM ALL MOUNTED IN ONE COMMON STRUCTURE; 3'6" WIDE X 3'6" WIDE X 14'6" O.A.H. V-1002 HOPPER 36" WIDE X 36" WIDE X 84" TALL HOPPER MO...
Cleveland, TX
PFAUDLER WFDWV52800-7B 111038
- Manufacturer: Pfaudler
UNUSED; AGITATOR GEAR BOX ONLY; Qty: 1 | Alloy: C | Material: CS | Ratio: 18:1 | Driver type: NONE | Remarks: AGITATOR GEAR BOX ONLY!
Cleveland, TX
LIGHTNIN X6P25 108613A
- Manufacturer: Lightnin
7.6" DIAMETER IMPELLER SPAN; MOTOR: .25 HP, 1725 RPM, 230/460 VOLTS, TEFC ENCLOSURE;
Cleveland, TX
$DRAIS PM-1000-TEX-H 105578$
DRAIS PM-1000-TEX-H 105578
- Manufacturer: Drais
PREVIOUS SERVICE: GYPSUM (CALCIUM SULFATE) PIGMENT FOR PAPER INDUSTRY; DRAIS HORIZONTAL AGITATOR BEAD MILL; CARBON STEEL JACKETED CHAMBER APPROX 2.2M X 1M DIAMETER WITH STAINLESS STEEL LINING; TYPE PM1000; TEX H...
Cleveland, TX